IEC TR 60076-26:2020

Power transformers - Part 26: Functional requirements of insulating liquids for use in power transformers

IEC TR 60076-26: 2020 which is a Technical Report, provides the functional requirements of insulating liquids that are considered necessary for use in power transformers, including, for example, reactors and HVDC transformers, are assembled and listed. A relevance index of importance for design and for service as well as the status of validation is given for all individual requirements (parameters). All parameters are assigned to one of the following categories:
General (physical / chemical)
Dielectric / Insulation
Thermal / Cooling
Ageing and Stability
Liquid-solid system
Material compatibility  The document is intended to serve as a general reference document for the transformer industry, including liquid suppliers as well as relevant scientific and technical bodies dealing with insulating liquids (materials).

General Information

• Status: Published
• Publication Date: 25-Mar-2020
• ICS: 01 - GENERALITIES. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION
• ICS: 29.180 - Transformers. Reactors
• Technical Committee: TC 14 - Power transformers
• Current Stage: PPUB - Publication issued
• Start Date: 06-Apr-2020
• Completion Date: 26-Mar-2020

Standards Content (Sample)

IEC TR 60076-26 ®
Edition 1.0 2020-03
TECHNICAL
REPORT
colour
inside
Power transformers –
Part 26: Functional requirements of insulating liquids for use in power
transformers
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.

IEC Central Office Tel.: [phone]
3, rue de Varembé [e-mail]
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.

IEC publications search - webstore.iec.ch/advsearchform Electropedia - www.electropedia.org
The advanced search enables to find IEC publications by a The world's leading online dictionary on electrotechnology,
variety of criteria (reference number, text, technical containing more than 22 000 terminological entries in English
committee,…). It also gives information on projects, replaced and French, with equivalent terms in 16 additional languages.
and withdrawn publications. Also known as the International Electrotechnical Vocabulary

(IEV) online.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Glossary - std.iec.ch/glossary
details all new publications released. Available online and once 67 000 electrotechnical terminology entries in English and
a month by email. French extracted from the Terms and Definitions clause of IEC
publications issued since 2002. Some entries have been
IEC Customer Service Centre - webstore.iec.ch/csc collected from earlier publications of IEC TC 37, 77, 86 and
If you wish to give us your feedback on this publication or need CISPR.

further assistance, please contact the Customer Service

Centre: [e-mail].
IEC TR 60076-26 ®
Edition 1.0 2020-03
TECHNICAL
REPORT
colour
inside
Power transformers –
Part 26: Functional requirements of insulating liquids for use in power

transformers
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 29.180 ISBN 978-2-8322-8016-4

– 2 – IEC TR 60076-26:2020 © IEC 2020
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Explanation of entries used for the categorization . 7
5 Maintenance . 8
6 Categorized functional requirements of insulating liquids . 9
6.1 General (physical / chemical) . 9
6.2 Dielectric / insulation . 10
6.3 Thermal / cooling . 11
6.4 Ageing and stability . 12
6.5 Liquid-solid system . 13
6.6 Material compatibility . 14

Table 1 – General (physical / chemical) . 9
Table 2 – Dielectric / insulation . 10
Table 3 – Thermal / cooling . 11
Table 4 – Ageing and stability . 12
Table 5 – Liquid-solid system . 13
Table 6 – Material compatibility . 14

INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
POWER TRANSFORMERS –
Part 26: Functional requirements of insulating
liquids for use in power transformers

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
rights. IEC shall not be held responsible for identifying any or all such patent rights.
The main task of IEC technical committees is to prepare International Standards. However, a
technical committee may propose the publication of a Technical Report when it has collected
data of a different kind from that which is normally published as an International Standard, for
example "state of the art".
IEC/TR 60076-26, which is a technical report, has been prepared by IEC technical
committee 14, Power transformers.
The text of this Technical Report is based on the following documents:
Draft TR Report on voting
14/1010/DTR 14/1018/RVDTR
Full information on the voting for the approval of this Technical Report can be found in the
report on voting indicated in the above table.

– 4 – IEC TR 60076-26:2020 © IEC 2020
This document has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all parts in the IEC 60076 series, published under the general title Power transformers,
can be found on the IEC website.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to
the specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
IMPORTANT – The 'colour inside' logo on the cover page of this publication indicates
that it contains colours which are considered to be useful for the correct understanding
of its contents. Users should therefore print this document using a colour printer.

INTRODUCTION
At the time of writing of this document, many new insulating liquids for power transformers are
being offered by various suppliers. The end users of insulating liquids in power transformers
assume that a particular liquid has been properly qualified to perform the functional
requirements as a coolant and an electrical insulating liquid without failure for the expected
lifetime of the specific device.
So far, there is no available IEC International Standard in the form of a roadmap that lays out
the many requirements of liquids for use in power transformers, reactors and other high voltage
equipment other than simply conforming to a liquid standard specification, as for example
IEC 60296, IEC 62770 or IEC 61099.
In this document, the functional requirements of an insulating liquid that are considered
necessary for use in a power transformer application, are assembled and listed in a structured
manner. Detailed technical information on the individual requirements and their validation is
purposely not given. This is because this document is intended to serve as a reference
document for the transformer industry, including liquid suppliers as well as relevant scientific
and technical bodies dealing with insulating liquids (materials).
Certain functional requirements of an insulating liquid are not independent from design aspects
and materials in contact with the liquid. For example, dielectric withstand capability/testing and
transformer systems ageing, widely require consideration of solid and liquid insulation materials
together as a system. For transformers with tap-changers, additional requirements not yet
included in standards are applicable.
To address this, a matrix of functional requirements, including their status of validation (testing)
has been developed and is presented in this document. It is recommended to consider the
requirements for any insulating liquid to be used in power transformers, including for example
reactors, HVDC transformers.
The individual requirements (parameters) in the matrix are given a relevance index as to their
importance for design and service. Furthermore, for each parameter the status of the method
is indicated as
– already existing as an IEC/ISO International Standard,
– existing as an IEC/ISO International Standard that requires updating / extension, or
– does not exist as an IEC/ISO International Standard, thus would require future development.
Some of the identified tests are only available as ASTM or IEEE standards. Such tests, as well
as missing tests, are recommended as future work items for the relevant CIGRE and IEC bodies.
The intention is for this document to be regularly updated based on results produced by the
previously mentioned bodies. This will ensure the availability of prevailing information on the
functional requirements of insulating liquids used in the transformer industry.

– 6 – IEC TR 60076-26:2020 © IEC 2020
POWER TRANSFORMERS –
Part 26: Functional requirements of insulating
liquids for use in power transformers

1 Scope
In this document, the functional requirements of insulating liquids that are considered necessary
for use in power transformers, including, for example, reactors and HVDC transformers, are
assembled and listed. A relevance index of importance for design and for service as well as the
status of validation is given for all individual requirements (parameters). All parameters are
assigned to one of the following categories:
– General (physical / chemical)
– Dielectric / Insulation
– Thermal / Cooling
– Ageing and Stability
– Liquid-solid system
– Material compatibility
The document is intended to serve as a general reference document
...