IEC 60884-2-1

Plugs and socket-outlets for household and similar purposes - Part 2-1: Particular requirements for fused plugs

This part of IEC 60884 applies to fused plugs, where the fuses are  primarily intended to protect the flexible cable or cord.           These fuses are not intended to protect appliances or parts of them against overload.                                                  [
]This English-language version is derived from the original bilingual publication by leaving out all French-language pages. Missing page   numbers correspond to the French-language pages.

Vtiči in vtičnice za gospodinjstva in podobne namene - 2-1. del: Posebne zahteve za vtiče z vgrajenimi varovalkami

Uporablja se ta klavzula prvega dela, razen kot sledi. Dodatek: Ta del IEC 60884 velja za vtiče z vgrajenimi varovalkami, kjer so varovalke prvotno namenjene za zaščito prilagodljivega kabla ali žice. Te varovalke niso namenjene za zaščito gospodinjskih aparatov ali njihovih delov pred preobremenitvijo. OPOMBA V naslednjih državah vtiči z vgrajenimi varovalkami niso uporabljeni: DK.

General Information

• Status: Not Published
• ICS: 29.120.30 - Plugs, socket-outlets, couplers
• Technical Committee: SC 23B - Plugs, socket-outlets and switches
• Current Stage: PPUB - Publication issued
• Start Date: 11-Oct-2006
• Ref Project: SIST IEC 60884-2-1:2010 - Plugs and socket-outlets for household and similar purposes - Part 2-1: Particular requirements for fused plugs

Standards Content (Sample)

SLOVENSKI STANDARD
SIST IEC 60884-2-1:2010
01-julij-2010
9WLþLLQYWLþQLFH]DJRVSRGLQMVWYDLQSRGREQHQDPHQHGHO3RVHEQH]DKWHYH
]DYWLþH]YJUDMHQLPLYDURYDONDPL
Plugs and socket-outlets for household and similar purposes - Part 2-1: Particular
requirements for fused plugs
Ta slovenski standard je istoveten z: IEC 60884-2-1
ICS:
29.120.30 9WLþLYWLþQLFHVSRMNH Plugs, socket-outlets,
couplers
SIST IEC 60884-2-1:2010 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST IEC 60884-2-1:2010

---------------------- Page: 2 ----------------------

SIST IEC 60884-2-1:2010


INTERNATIONAL IEC


STANDARD 60884-2-1





Second edition
2006-10


Plugs and socket-outlets for
household and similar purposes –
Part 2-1:
Particular requirements for fused plugs

© IEC 2006 Copyright - all rights reserved
No part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical,
including photocopying and microfilm, without permission in writing from the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: [phone] Telefax: [phone] E-mail: [e-mail] Web: www.iec.ch
PRICE CODE
J
Commission Electrotechnique Internationale
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
For price, see current catalogue

---------------------- Page: 3 ----------------------

SIST IEC 60884-2-1:2010
60884-2-1 © IEC:2006 – 3 –
CONTENTS
FOREWORD.5

1 Scope.9
2 Normative references .9
3 Definitions .9
4 General requirements .9
5 General notes on tests .11
6 Ratings.11
7 Classification.11
8 Marking .11
9 Checking of dimensions.11
10 Protection against electric shock .13
11 Provision for earthing .13
12 Terminals and terminations .13
13 Construction of fixed socket-outlets .13
14 Construction of plugs and portable socket-outlets.13
15 Interlocked socket-outlets.15
16 Resistance to ageing, protection provided by enclosures and resistance to
humidity .15
17 Insulation resistance and electric strength .15
18 Operation of earthing contacts.15
19 Temperature rise .15
20 Breaking capacity .15
21 Normal operation.15
22 Force necessary to withdraw the plug.15
23 Flexible cables and cords and their connection.15
24 Mechanical strength .17
25 Resistance to heat.17
26 Screws, current-carrying parts and connections.17
27 Creepage distances, clearances and distances through sealing compound .17
28 Resistance of insulating material to abnormal heat, to fire and to tracking .17
29 Resistance to rusting.17
30 Additional tests on pins provided with insulating sleeves .17

---------------------- Page: 4 ----------------------

SIST IEC 60884-2-1:2010
60884-2-1 © IEC:2006 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

PLUGS AND SOCKET-OUTLETS FOR HOUSEHOLD
AND SIMILAR PURPOSES –

Part 2-1: Particular requirements for fused plugs


FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the N
...