IEC 62246-2:2007

Reed contact units - Part 2: Heavy-duty reed switches

Applies to the switching performance of heavy-duty reed switches for use in industrial applications based upon IEC 62246-1. Specifies reliability tests, rated making and breaking capacities, rated impulse voltages, rated conditional short-circuit currents, temperature rise and construction testing in addition to the requirements of IEC 62246-1.

General Information

• Status: Replaced
• Publication Date: 09-Oct-2007
• ICS: 29.120.70 - Relays
• Technical Committee: TC 94 - Electrical relays
• Current Stage: DELPUB - Deleted Publication
• Completion Date: 10-Feb-2011

Relations

• Replaced By: IEC 62246-1:2011 - Reed switches - Part 1: Generic specification
• Effective Date: 05-Sep-2023

Standards Content (Sample)

IEC 62246-2
Edition 1.0 2007-10
INTERNATIONAL
STANDARD
Reed contact units –
Part 2: Heavy-duty reed switches

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.

IEC Central Office
3, rue de Varembé
CH-1211 Geneva 20
Switzerland
Email: [e-mail]
Web: www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
ƒ Catalogue of IEC publications: www.iec.ch/searchpub
The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,…).
It also gives information on projects, withdrawn and replaced publications.
ƒ IEC Just Published: www.iec.ch/online_news/justpub
Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available
on-line and also by email.
ƒ Electropedia: www.electropedia.org
The world's leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions
in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical
Vocabulary online.
ƒ Customer Service Centre: www.iec.ch/webstore/custserv
If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service
Centre FAQ or contact us:
Email: [e-mail]
Tel.: [phone]
Fax: [phone]
IEC 62246-2
Edition 1.0 2007-10
INTERNATIONAL
STANDARD
Reed contact units –
Part 2: Heavy-duty reed switches

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
V
ICS 29.120.70 ISBN 2-8318-9330-5

– 2 – 62246-2 © IEC:2007(E)
CONTENTS
FOREWORD.5

1 General .7
1.1 Scope.7
1.2 Normative references .7
1.3 Terms, definitions, abbreviations and symbols.7
1.4 Preferred values.8
1.4.1 Frequency of operation.8
1.4.2 Duty cycle .8
1.4.3 Open-circuit voltage across contacts .8
1.4.4 Current ratings .8
1.4.5 Load ratings .8
1.4.6 Number of operations .8
1.4.7 Climatic category.8
1.4.8 Preferred environmental severities .8
1.4.9 Rated operational voltage; U .8
e
1.4.10 Rated switching current; I .9
e
1.4.11 Rated insulation voltage .9
1.4.12 Rated impulse voltage .9
1.4.13 Utilization categories .9
1.4.14 Contact reliability.9
1.4.15 Limiting continuous current; I .9
th
1.5 Marking .10
1.6 Order of precedence .10
1.7 Precautions regarding mercury (for mercury wetted contact units) .10
2 Quality assessment procedures.10
2.1 General .10
2.2 Self-certification .10
2.3 Two-party certification .10
2.4 Third-party certification.10
3 Test and measurement procedures.11
3.1 General .11
3.2 Alternative procedures .11
3.3 Standard conditions for testing .11
3.4 Visual inspection and check of dimensions.11
3.5 Functional tests.11
3.6 Remanence test .11
3.7 Contact circuit resistance .11
3.8 Dielectric test .11
3.9 Insulation resistance .11
3.10 Operate, release, transfer or bridging, and bounce times.11
3.11 Contact sticking.12
3.12 Robustness of terminals .12
3.13 Soldering (solderability and resistance to soldering heat) .12
3.14 Climatic sequence .12
3.15 Damp heat, steady state.12

62246-2 © IEC:2007(E) – 3 –
3.16 Rapid change of temperature .12
3.17 Salt mist.12
3.18 Bump .12
3.19 Vibration.12
3.20 Shock.12
3.21 Acceleration test – Functional test only .12
3.22 Sealing.12
3.23 Electrical endurance.12
3.23.1 General .12
3.23.2 Types of electrical endurance test .13
3.23.3 Standard electrical endurance test.13
3.23.4 Application simulation endurance test.14
3.23.5 Requirements .14
3.23.6 Information to be stated in the detail specification .14
3.24 Mechanical endurance.15
3.25 Maximum cycling frequency.15
3.26 Mounting position test (for mercury wetted contact units) .15
3.27 Drain time test (for mercury wetted contact units).15
3.28 Voltage surge test .15
3.29 Rated impulse voltage .15
3.29.1 Procedure.15
3.29.2 Requirements .16
3.29.3 Information to be stated in the detail specification .16
3.30 Rated making and breaking capacities .16
3.30.1 General test arrangements .16
3.30.2 Procedure.16
3.30.3 Requirements .16
3.30.4 Information to be stated in the detail specification .16
3.31 Rated conditional short-circuit current .19
3.31.1 General test arrangements .19
3.31.2 Procedure.19
3.31.3 Requirements .19
3.31.4 Information to be stated in the detail specification .20
3.32 Contact reliability test.20
3.32.1 General test arrangements .20
3.32.2 Procedure.20
3.32.3 Requirements .21
3.32.4 Information to be stated in the detail specification .21
3.33 Temperature rise.22
3.33.1 Procedure.22
3.33.2 Requirements .22
3.33.3 Information to be stated in the detail specification .22
3.34 Making current capacity test.23
3.34.1 General .23
3.34.2 Procedure.23
3.34.3 Requirements .23
3.34.4 Information to be stated in the detail specification .23
3.35 Breaking current capacity test .24
3.35.1 General .24

– 4 – 62246-2 © IEC:2007(E)
3.35.2 Procedure.24
3.35.3 Requirements .24
3.35.4 Information to be stated in the detail specification .24

Annex A (informative) Electrical endurance test circuit.26
Annex B (informative) Rated conditional short-circuit current test circuit .28
Annex C (informative) Electrical ratings based on utilization categories .29
Annex D (informative) Example of test arrangement for contact reliability test .31
Annex E (informative) Standard test coils for heavy-duty reed switches .32
Annex F (informative) Making current capacity test sequence .33
Annex G (informative) Breaking current capacity test sequence.
...