iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
IEC

IEC 60601-2-33:2010/COR1:2012

(Corrigendum)

Corrigendum 1 - Medical electrical equipment - Part 2-33: Particular requirements for the basic safety and essential performance of magnetic resonance equipment for medical diagnosis

Corrigendum 1 - Medical electrical equipment - Part 2-33: Particular requirements for the basic safety and essential performance of magnetic resonance equipment for medical diagnosis

Corrigendum 1 - Appareils électromédicaux - Partie 2-33: Exigences particulières pour la sécurité de base et les performances essentielles des appareils à résonance magnétique utilisés pour le diagnostic médical

General Information

Status
Published
Publication Date
04-Mar-2012
ICS
11.040.55 - Diagnostic equipment
Technical Committee
SC 62B - Medical imaging equipment, software, and systems
Current Stage
DELPUB - Deleted Publication
Completion Date
04-Aug-2022
Ref Project

Relations

Corrects
IEC 60601-2-33:2010 - Medical electrical equipment - Part 2-33: Particular requirements for the basic safety and essential performance of magnetic resonance equipment for medical diagnosis
Effective Date
05-Sep-2023
Corrected By
IEC 60601-2-33:2010/COR2:2016 - Corrigendum 2 - Medical electrical equipment - Part 2-33: Particular requirements for the basic safety and essential performance of magnetic resonance equipment for medical diagnosis
Effective Date
05-Sep-2023
Revised
IEC 60601-2-33:2022 - Medical electrical equipment - Part 2-33: Particular requirements for the basic safety and essential performance of magnetic resonance equipment for medical diagnosis
Effective Date
05-Sep-2023

Buy Standard

IEC 60601-2-33:2010/COR1:2012 - Corrigendum 1 - Medical electrical equipment - Part 2-33: Particular requirements for the basic safety and essential performance of magnetic resonance equipment for medical diagnosis Released:3/5/2012IEC 60601-2-33:2010/COR1:2012 - Corrigendum 1 - Medical electrical equipment - Part 2-33: Particular requirements for the basic safety and essential performance of magnetic resonance equipment for medical diagnosis Released:3/5/2012
PreviousNext
Standard
IEC 60601-2-33:2010/COR1:2012 - Corrigendum 1 - Medical electrical equipment - Part 2-33: Particular requirements for the basic safety and essential performance of magnetic resonance equipment for medical diagnosis Released:3/5/2012
English and French language
10 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


IEC 60601-2-33 CEI 60601-2-33
(Third edition – 2010) (Troisième édition – 2010)

Medical electrical equipment – Appareils électromédicaux –

Part 2-33: Particular requirements for the basic Partie 2-33: Exigences particulières pour la
safety and essential performance of magnetic sécurité de base et les performances

resonance equipment for medical diagnosis essentielles des appareils à résonance

magnétique utilisés pour le diagnostic

médical
CO RRI G E NDUM 1
201.3.201 201.3.201
Replace the existing term "B RMS" by Remplacer le terme existant "B RMS" par
1 1
"B RMS". "B RMS".
1+ 1+
Replace, in the definition: Remplacer, dans la définition:
"B , the radio frequency magnetic induction" "B , l'induction magnétique à radiofréquence"
1 1
by par
"B , the MR relevant radiofrequency "B , l'induction magnétique à radiofréquence
1+ 1+
magnetic induction" RM pertinente".
Replace, in the formula, "B RMS" by "B RMS" Remplacer, dans la formule, "B RMS" par
1 1+ 1
and "B " by "B ". "B RMS" et "B " par "B ".
1 1+ 1+ 1 1+
Table 201.101 – List of symbols Tableau 201.101 – Liste des symboles
nd st ème ère
In the 2 row, 1 column replace "B " by Dans la 2 ligne, 1 colonne remplacer
"B ". "B " par "B ".
1+ 1 1+
rd st ème ère
In the 3 row, 1 column replace "B RMS" by Dans la 3 ligne, 1 colonne remplacer
"B RMS". "B RMS" par "B RMS".
1+ 1 1+
rd rd ème ème
In the 3 row, 3 column replace "B " by Dans la 3 ligne, 3 colonne remplacer
"B ". "B " par "B ".
1+ 1 1+
201.7.9.2.101 Instructions for use for 201.7.9.2.101 Instructions d’utilisation des
MR EQUIPMENT APPAREILS A RM
j) Exposure of the PATIENT to radio j) Exposition du PATIENT aux champs
frequency magnetic fields magnétiques à radiofréquence
In the final dashed item replace "B RMS" by Dans le dernier tiret, remplacer "B RMS" par
1 1
"B RMS" "B RMS".
1+ 1+
March 2012                                                            Mars 2012

201.7.9.3.101 Technical description of 201.7.9.3.101 Description technique des

MR EQUIPMENT APPAREILS À RM
b) Compatibility tec
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

IEC
IEC 60601-2-37:2024(Main)
Medical electrical equipment - Part 2-37: Particular requirements for the basic safety and essential performance of ultrasonic medical diagnostic and monitoring equipment

IEC 60601-2-37:2024 applies to the BASIC SAFETY and ESSENTIAL PERFORMANCE of ULTRASONIC DIAGNOSTIC EQUIPMENT as defined in 201.3.217, hereinafter referred to as ME EQUIPMENT. If a clause or subclause is specifically intended to be applicable to ME EQUIPMENT only, or to ME SYSTEMS only, the title and content of that clause or subclause will say so. If that is not the case, the clause or subclause applies both to ME EQUIPMENT and to ME SYSTEMS, as relevant. HAZARDS inherent in the intended physiological function of ME EQUIPMENT or ME SYSTEMS within the scope of this document are not covered by specific requirements in this document except in 201.7.2.13. This document does not cover ultrasonic therapeutic equipment. Equipment used for the imaging or diagnosis of body structures by ultrasound in conjunction with other medical procedures is covered. IEC 60601-2-37:2024 cancels and replaces the second edition published in 2007 and Amendment 1:2015. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) technical and editorial changes resulting from the amended general standard IEC 60601 1:2005, IEC 60601-1:2005/AMD1:2012 and IEC 60601-1:2005/AMD2:2020 and its collateral standards IEC 60601-1-xx,
b) technical and editorial changes as a result of maintenance to normative references;
c) technical and editorial changes resulting from relevant developments in TC 87 Ultrasonics standards. In particular, Clause 201.11 about protection against excessive temperatures and other hazards has been fully revised.

  • Standard
    181 pages
    English language
    sale 15% off
  • Standard
    118 pages
    English and French language
    sale 15% off
IEC
IEC 60601-2-33:2022/ISH1:2023(Main)
Interpretation Sheet 1 - Medical electrical equipment - Part 2-33: Particular requirements for the basic safety and essential performance of magnetic resonance equipment for medical diagnosis
  • Standard
    2 pages
    English language
    sale 15% off
IEC
IEC 60601-2-33:2022(Main)
Medical electrical equipment - Part 2-33: Particular requirements for the basic safety and essential performance of magnetic resonance equipment for medical diagnosis

IEC 60601-2-33:2022 applies to the BASIC SAFETY and ESSENTIAL PERFORMANCE of MAGNETIC RESONANCE (MR) EQUIPMENT and MAGNETIC RESONANCE (MR) SYSTEMS.
This document does not cover the application of MR EQUIPMENT beyond the INTENDED USE.
If a clause or subclause is specifically intended to be applicable to MR EQUIPMENT only, or to MR SYSTEMS only, the title and content of that clause or subclause will say so. If that is not the case, the clause or subclause applies both to MR EQUIPMENT and to MR SYSTEMS, as relevant.
This document does not formulate additional specific requirements for MR EQUIPMENT or MR SYSTEMS used in INTERVENTIONAL MR EXAMINATIONS.
IEC 60601-2-33:2022 cancels and replaces the third edition published in 2010, Amendment 1:2013 and Amendment 2:2015. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) aligned with IEC 60601-1:2005 and its two amendments IEC 60601-1:2005/AMD1:2012 and IEC 60601-1:2005/AMD2:2020;
b) addition of safety requirements for the EMERGENCY FIELD SHUT DOWN UNIT;
c) clarification of acoustic protection measures for the PATIENT and MR WORKER;
d) addition of noise emission declaration for exposure inside the MR EXAMINATION ROOM, to support occupational health assessment by the RESPONSIBLE ORGANIZATION;
e) addition of compliance methods for thermal safety of RF coils;
f) addition of RF transmit definitions to match MR CONDITIONAL labelling requirements for MEDICAL DEVICES;
g) clarification of requirements for MR CONDITIONAL labelling of ACCESSORIES;
h) alignment of static magnetic field limit for B0 HAZARD area to limits in other MEDICAL DEVICE standards (especially that for pacemakers, ISO 14117), the new limit value being 0,9 mT;
i) improved description of the magnetic field related plots in the Compatibility Technical Specification Sheet (CTSS);
j) provision of compatibility sequences (in the CTSS) to test auxiliary equipment by the MR manufacturer has become optional, and is expected to be eliminated in a future edition;
k) a separate section with requirements for a site-planning document containing safety information;
l) requirements for the alerting function (PATIENT to OPERATOR);
m) introduction of MROC as mandatory functionality for 1,5 T and 3 T systems to facilitate scanning of PATIENTs with MEDICAL DEVICES labelled as MR CONDITIONAL, unless such scanning is explicitly contra-indicated by the MR MANUFACTURER;
n) RF coil symbols in Table 201.A.102 have become mandatory, and the preferred and alternate signs have been swapped relative to the previous edition, with preferred now being the sign with color;
o) determination of the B1 stray field in 201.12.4.105.3.3 based on calculations only
The contents of the Interpretation Sheet 1 of May 2023 have been included in this copy.

  • Standard
    302 pages
    English and French language
    sale 15% off
IEC
IEC 62563-2:2021(Main)
Medical electrical equipment - Medical image display systems - Part 2: Acceptance and constancy tests for medical image displays

IEC 62563-2:2021 establishes the performance CRITERIA and test frequencies for the ACCEPTANCE TESTS and CONSTANCY TESTS. The evaluation methods are defined in IEC 62563-1. The scope of this document is directed to practical tests that can be visually evaluated or measured using basic test equipment. This document applies to medical IMAGE DISPLAY SYSTEMS, which can display monochrome image information in the form of greyscale values on colour and greyscale IMAGE DISPLAY SYSTEMS. This document does not apply to information displays and to displays used solely for control of technical settings of all medical information.

  • Standard
    71 pages
    English and French language
    sale 15% off
IEC
IEC 62563-1:2009/AMD2:2021(Amendment)
Amendment 2 - Medical electrical equipment - Medical image display systems - Part 1: Evaluation methods
  • Standard
    25 pages
    English and French language
    sale 15% off
IEC
IEC 62563-1:2009(Main)
Medical electrical equipment - Medical image display systems - Part 1: Evaluation methods

IEC 62563-1:2009 describes the evaluation methods for testing medical image display systems. It is directed to practical tests that can be visually evaluated or measured using basic test equipment. More advanced or more quantitative measurements can be performed on these devices, but these are beyond the scope of this document. IEC 62563-1:2009 applies to medical image display systems, which can display monochrome image information in the form of greyscale values on colour and greyscale image display systems (e.g. cathode ray tube (CRT) monitors, flat panel displays, projection system). This standard applies to medical image display systems used for diagnostic (interpretation of medical images toward rendering clinical diagnosis) or viewing (viewing medical images for medical purposes other than for providing a medical interpretation) purposes and therefore having specific requirements in terms of image quality. Head mounted image display systems and image display systems used for confirming positioning and for operation of the system are not covered by this standard.

  • Standard
    114 pages
    English and French language
    sale 15% off
  • Standard
    257 pages
    English and French language
    sale 15% off
  • Standard
    294 pages
    English and French language
    sale 15% off
IEC
IEC 63077:2019(Main)
Good refurbishment practices for medical imaging equipment

IEC 63077:2019 describes and defines the PROCESS of REFURBISHMENT of USED MEDICAL IMAGING EQUIPMENT and applies to the restoring of USED MEDICAL IMAGING EQUIPMENT to a condition of safety and performance comparable to that of new MEDICAL IMAGING EQUIPMENT i.e. MEDICAL IMAGING EQUIPMENT that was not in use. This restoration includes actions such as REPAIR, REWORK, software/hardware updates, and the replacement of worn parts with original parts. This document enumerates the actions, that are performed, and the manner consistent, with relevant specifications and service procedures required to ensure that the REFURBISHMENT of MEDICAL IMAGING EQUIPMENT is done without changing the finished MEDICAL IMAGING EQUIPMENT’s performance, safety specifications, or INTENDED USE according to its original or applicable valid registration.
The MEDICAL IMAGING EQUIPMENT and systems covered by this document include:
– X-RAY EQUIPMENT;
– X-RAY EQUIPMENT for RADIOSCOPICALLY GUIDED INTERVENTIONAL PROCEDURES;
– X-RAY EQUIPMENT FOR COMPUTED TOMOGRAPHY;
– MAGNETIC RESONANCE EQUIPMENT;
– ULTRASONIC DIAGNOSTIC EQUIPMENT;
– GAMMA CAMERAS;
– PLANAR WHOLEBODY IMAGING EQUIPMENT;
– equipment for SINGLE PHOTON EMISSION COMPUTED TOMOGRAPHY (SPECT);
– SPECT/CT hybrid systems, combining a GAMMA CAMERA with X-RAY EQUIPMENT FOR COMPUTED TOMOGRAPHY (CT);
– POSITRON EMISSION TOMOGRAPHS (PET);
– PET/CT hybrid systems combining a POSITRON EMISSION TOMOGRAPH with X-RAY EQUIPMENT FOR COMPUTED TOMOGRAPHY (CT);
– PET/MRI hybrid systems combining a POSITRON EMISSION TOMOGRAPH with MAGNETIC RESONANCE EQUIPMENT: and
– other combinations of the MEDICAL IMAGING EQUIPMENT or systems listed above.
This document does not apply to endoscopic equipment, funduscopic equipment, radiation therapy equipment, nor associated systems.
IEC 63077:2019 includes the following significant technical changes with respect to IEC PAS 63077:2016:
a) the scope was delineated more clearly;
b) an informative cross reference list of IEC 63077 vs ISO 13485 (Annex A) was added;
c) smaller corrections were performed.

  • Standard
    33 pages
    English and French language
    sale 15% off
IEC
IEC 60601-2-28:2017(Main)
Medical electrical equipment - Part 2-28: Particular requirements for the basic safety and essential performance of X-ray tube assemblies for medical diagnosis

IEC 60601-2-28:2017 applies to the basic safety and essential performance of X-ray tube assemblies and to components thereof, intended for medical diagnosis and imaging. Where the general standard IEC 60601-1 and the collateral standard IEC 60601-1-3 refer to me equipment, this is interpreted as X-ray tube assemblies in this particular standard. If a clause or subclause is specifically intended to be applicable to ME equipment only, or to ME systems only, the title and content of that clause or subclause will say so. If that is not the case, the clause or subclause applies both to ME equipment and to ME systems, as relevant. The third edition of this particular standard has been prepared to fit IEC 60601-1:2005 and IEC 60601-1:2005/AMD1:2012 (the amended third edition of IEC 60601-1), which is referred to as the general standard. Apart from the changes related to the amendment of IEC 60601-1, changes related to technical improvements are also included.

  • Standard
    73 pages
    English language
    sale 15% off
  • Standard
    48 pages
    English and French language
    sale 15% off
IEC
IEC 60601-2-65:2012/AMD1:2017(Amendment)
Amendment 1 - Medical electrical equipment - Part 2-65: Particular requirements for the basic safety and essential performance of dental intra-oral X-ray equipment

Specifies the requirements for testing items of equipment intended for use on railway vehicles which are subsequently subjected to vibrations and chock owing to the nature of railway operational environment.

  • Standard
    9 pages
    English and French language
    sale 15% off
IEC
IEC 62563-1:2009/AMD1:2016(Amendment)
Amendment 1 - Medical electrical equipment - Medical image display systems - Part 1: Evaluation methods
  • Standard
    16 pages
    English and French language
    sale 15% off