General methods of test for pigments and extenders — Part 17: Comparison of lightening power of white pigments

This part of ISO 787 specifies a general method of test for comparing the lightening (reducing) power of a white pigment with the lightening power of an agreed sample of the same type. Two procedures (A and B) are described. Procedure A is quicker than procedure B and is suitable for testing one sample of pigment; procedure B is better for testing several samples, and especially if a pigment of unknown lightening power is being tested.

Méthodes générales d'essai des pigments et matières de charge — Partie 17: Comparaison du pouvoir éclaircissant des pigments blancs

La présente partie de l'ISO 787 spécifie une méthode générale d'essai pour comparer le pouvoir éclaircissant des pigments blancs au pouvoir éclaircissant d'un échantillon agréé de même type. Deux modes opératoires (A et B) sont décrits. Le mode opératoire A est plus rapide que le mode opératoire B et convient pour essayer un échantillon de pigment. Le mode opératoire B est préférable pour essayer plusieurs échantillons et particulièrement si un pigment de pouvoir éclaircissant inconnu doit être essayé.

General Information

Status
Withdrawn
Publication Date
17-Jul-2002
Withdrawal Date
17-Jul-2002
Current Stage
9599 - Withdrawal of International Standard
Completion Date
02-Apr-2019
Ref Project

Relations

Buy Standard

Standard
ISO 787-17:2002 - General methods of test for pigments and extenders
English language
5 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 787-17:2002 - Méthodes générales d'essai des pigments et matieres de charge
French language
5 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 787-17
Second edition
2002-08-01
General methods of test for pigments and
extenders —
Part 17:
Comparison of lightening power of white
pigments
Méthodes générales d'essai des pigments et matières de charge —
Partie 17: Comparaison du pouvoir éclaircissant des pigments blancs

Reference number
ISO 787-17:2002(E)
©
ISO 2002

---------------------- Page: 1 ----------------------
ISO 787-17:2002(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be
edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file,
parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters
were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event
that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2002
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's
member body in the country of the requester.
ISO copyright office
Case postale 56  CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.ch
Web www.iso.ch
Printed in Switzerland
©
ii ISO 2002 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 787-17:2002(E)
Contents Page
1 Scope . 1
2 Normative references . 1
3 Reagent . 1
4 Apparatus . 2
5 Sampling . 2
6 Procedure . 2
7 Expression of results . 4
8 Test report . 5
©
ISO 2002 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO 787-17:2002(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO
member bodies). The work of preparing International Standards is normally carried out through ISO technical
committees. Each member body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, governmental and non-governmental, in
liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this part of ISO 787 may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
International Standard ISO787-17 was prepared by Technical Committee ISO/TC35, Paints and varnishes,
Subcommittee SC 2, Pigments and extenders.
This second edition cancels and replaces the first edition (ISO 787-17:1973), of which it constitutes a minor
(editorial) revision.
ISO 787 consists of the following parts, under the general title General methods of test for pigments and extenders:
— Part 1: Comparison of colour of pigments
— Part 2: Determination of matter volatile at 105 °C
— Part 3: Determination of matter soluble in water — Hot extraction method
— Part 4: Determination of acidity or alkalinity of the aqueous extract
— Part 5: Determination of oil absorption value
— Part 7: Determination of residue on sieve — Water method — Manual procedure
— Part 8: Determination of matter soluble in water — Cold extraction method
— Part 9: Determination of pH value of an aqueous suspension
— Part 10: Determination of density — Pyknometer method
— Part 11: Determination of tamped volume and apparent density after tamping
— Part 13: Determination of water-soluble sulphates, chlorides and nitrates
— Part 14: Determination of resistivity of aqueous extract
— Part 15: Comparison of resistance to light of coloured pigments of similar types
— Part 16: Determination of relative tinting strength (or equivalent colouring value) and colour on reduction of
coloured pigments — Visual comparison method
— Part 17: Comparison of lightening power of white pigments
— Part 18: Determination of residue on sieve — Mechanical flushing procedure
— Part 19: Determination of water-soluble nitrates (Salicylic acid method)
— Part 21: Comparison of heat stability of pigments using a stoving medium
— Part 22: Comparison of resistance to bleeding of pigments
©
iv ISO 2002 – All rights reserved

---------------------- Page: 4 ----------------------
ISO 787-17:2002(E)
— Part 23: Determination of density (using a centrifuge to remove entrained air)
— Part 24: Determination of relative tinting strength of coloured pigments and relative scattering power of white
pigments — Photometric methods
— Part 25: Comparison of the colour, in full-shade systems, of white, black and coloured pigments — Colorimetric
method
©
ISO 2002 – All rights reserved v

---------------------- Page: 5 ----------------------
INTERNATIONAL STANDARD ISO 787-17:2002(E)
General methods of test for pigments and extenders —
Part 17:
Comparison of lightening power of white pigments
1 Scope
This part of ISO 787 specifies a general method of test for comparing the lightening (reducing) power of a white
pigment with the lightening power of an agreed sample of the same type.
Two procedures (A and B) are described. Procedure A is quicker than procedure B and is suitable for testing one
sample of pigment; procedure B is better for testing several samples, and especially if a pigment of unknown
lightening power is being tested.
NOTE When this general method is applicable to a given pigment, a cross-reference to it will simply be included in the
International Standard relating to that pigment, with a note of any detailed modification which may be needed in view of the special
properties of the pigment in question. Only when this general method is not applicable to a particular pigment will a special
method for comparison of lightening power of white pigments be specified.
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of
this part of ISO 787. For dated references, subsequent amendments to, or revisions of, any of these publications do
not apply. However, parties to agreements based on this part of ISO 787 are encouraged to investigate the possibility
of applying the most recent editions of the normative documents indicated below. For undated references, the latest
edition of the normative document referred to applies. Members of ISO and IEC maintain registers of currently valid
International Standards.
ISO 788, Ultramarine pigments for paints
ISO 15528, Paints, varnishes and raw materials for paints and varnishes — Sampling
3Reagent
3.1 Blue paste, with the following composition:
— castor oil, medicinal quality: 500 g
— precipitated calcium sulfate, CaSO ·2H O: 475 g
4 2
— ultramarine blue complying with ISO 788: 5g
1)
— treated natural earth : 20 g
The paste shall be prepared as follows:
Mix the treated natural earth in a beaker with sufficient of the castor oil to give a uniform paste and then gradually stir

in the remaining castor oil. Heat the mixture so obtained to a temperature of 50 C and, after maintaining this
temperature for about 15 min, stir in the ultramarine blue and calcium sulfate, adding them in small amounts.
1) A prepared bentonite is a suitable material.
©
ISO 2002 – All rights reserved 1

---------------------- Page: 6 ------------------
...

NORME ISO
INTERNATIONALE 787-17
Deuxième édition
2002-08-01
Méthodes générales d'essai des pigments
et matières de charge —
Partie 17:
Comparaison du pouvoir éclaircissant des
pigments blancs
General methods of test for pigments and extenders —
Part 17: Comparison of lightening power of white pigments

Numéro de référence
ISO 787-17:2002(F)
©
ISO 2002

---------------------- Page: 1 ----------------------
ISO 787-17:2002(F)
PDF — Exonération de responsabilité
Le présent fichier PDF peut contenir des polices de caractères intégrées. Conformément aux conditions de licence d'Adobe, ce fichier peut
être imprimé ou visualisé, mais ne doit pas être modifié à moins que l'ordinateur employé à cet effet ne bénéficie d'une licence autorisant
l'utilisation de ces polices et que celles-ci y soient installées. Lors du téléchargement de ce fichier, les parties concernées acceptent de fait la
responsabilité de ne pas enfreindre les conditions de licence d'Adobe. Le Secrétariat central de l'ISO décline toute responsabilité en la
matière.
Adobe est une marque déposée d'Adobe Systems Incorporated.
Les détails relatifs aux produits logiciels utilisés pour la création du présent fichier PDF sont disponibles dans la rubrique General Info du
fichier; les paramètres de création PDF ont été optimisés pour l'impression. Toutes les mesures ont été prises pour garantir l'exploitation de
ce fichier par les comités membres de l'ISO. Dans le cas peu probable où surviendrait un problème d'utilisation, veuillez en informer le
Secrétariat central à l'adresse donnée ci-dessous.
© ISO 2002
Droits de reproduction réservés. Sauf prescription différente, aucune partie de cette publication ne peut être reproduite ni utilisée sous
quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l'accord écrit de
l'ISO à l'adresse ci-après ou au comité membre de l'ISO dans le pays du demandeur.
ISO copyright office
Case postale 56  CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.ch
Web www.iso.ch
Imprimé en Suisse
©
ii ISO 2002 – Tous droits réservés

---------------------- Page: 2 ----------------------
ISO 787-17:2002(F)
Sommaire Page
1 Domaine d'application . 1
2 Références normatives . 1
3 Réactifs . 1
4 Appareillage . 2
5 Échantillonnage . 2
6 Mode opératoire . 2
7 Expression des résultats . 4
8 Rapport d'essai . 5
©
ISO 2002 – Tous droits réservés iii

---------------------- Page: 3 ----------------------
ISO 787-17:2002(F)
Avant-propos
L'ISO (Organisation internationale de normalisation) est une fédération mondiale d'organismes nationaux de
normalisation (comités membres de l'ISO). L'élaboration des Normes internationales est en général confiée aux
comités techniques de l'ISO. Chaque comité membre intéressé par une étude a le droit de faire partie du comité
technique créé à cet effet. Les organisations internationales, gouvernementales et non gouvernementales, en liaison
avec l'ISO participent également aux travaux. L'ISO collabore étroitement avec la Commission électrotechnique
internationale (CEI) en ce qui concerne la normalisation électrotechnique.
Les Normes internationales sont rédigées conformément aux règles données dans les Directives ISO/CEI, Partie 3.
Les projets de Normes internationales adoptés par les comités techniques sont soumis aux comités membres pour
vote. Leur publication comme Normes internationales requiert l'approbation de 75 % au moins des comités membres
votants.
L'attention est appelée sur le fait que certains des éléments de la présente partie de l'ISO 787 peuvent faire l'objet
de droits de propriété intellectuelle ou de droits analogues. L'ISO ne saurait être tenue pour responsable de ne pas
avoir identifié de tels droits de propriété et averti de leur existence.
La Norme internationale ISO 787-17 a été élaborée par le comité technique ISO/TC 35, Peintures et vernis, sous-
comité SC 2, Pigments et matières de charge.
Cette deuxième édition annule et remplace la première édition (ISO 787-17:1973), dont elle constitue une révision
(éditoriale) mineure.
L'ISO 787 comprend les parties suivantes, présentées sous le titre général Méthodes générales d'essai des
pigments et matières de charge:
— Partie 1: Comparaison de la couleur des pigments
— Partie 2: Détermination des matières volatiles à 105 °C
— Partie 3: Détermination des matières solubles dans l'eau — Méthode par extraction à chaud
— Partie 4: Détermination de l'acidité ou de l'alcalinité de l'extrait aqueux
— Partie 5: Détermination de la prise d'huile
— Partie 7: Détermination du refus sur tamis — Méthode à l'eau — Méthode manuelle
— Partie 8: Détermination des matières solubles dans l'eau — Méthode par extraction à froid
— Partie 9: Détermination du pH d'une suspension aqueuse
— Partie 10: Détermination de la masse volumique — Méthode utilisant un pycnomètre
— Partie 11: Détermination du volume massique apparent et de la masse volumique apparente après tassement
— Partie 13: Détermination des sulfates, chlorures et nitrates solubles dans l'eau
— Partie 14: Détermination de la résistivité de l'extrait aqueux
— Partie 15: Comparaison de la résistance à la lumière des pigments colorés de types semblables
— Partie 16: Détermination du pouvoir colorant relatif (ou valeur de coloration équivalente) et de la couleur
dégradée des pigments colorés — Méthode de comparaison visuelle
— Partie 17: Comparaison du pouvoir éclaircissant des pigments blancs
— Partie 18: Détermination du refus sur tamis — Méthode mécanique avec liquide d'entraînement
— Partie 19: Détermination des nitrates solubles dans l'eau (Méthode à l'acide salicylique)
©
iv ISO 2002 – Tous droits réservés

---------------------- Page: 4 ----------------------
ISO 787-17:2002(F)
— Partie 21: Comparaison de la stabilité à la chaleur des pigments en utilisant un liant au four
— Partie 22: Comparaison de la résistance au saignement des pigments
— Partie 23: Détermination de la masse volumique (en utilisant une centrifugeuse pour chasser l'air entraîné)
— Partie 24: Détermination du pouvoir colorant relatif des pigments colorés et du pouvoir diffusant relatif des
pigments blancs — Méthodes photométriques
— Partie 25: Comparaison, dans les systèmes monopigmentaires, de la couleur des pigments blancs, noirs et
colorés — Méthode colorimétrique
©
ISO 2002 – Tous droits réservés v

---------------------- Page: 5 ----------------------
NORME INTERNATIONALE ISO 787-17:2002(F)
Méthodes générales d'essai des pigments et matières de charge —
Partie 17:
Comparaison du pouvoir éclaircissant des pigments blancs
1 Domaine d'application
La présente partie de l'ISO 787 spécifie une méthode générale d'essai pour comparer le pouvoir éclaircissant des
pigments blancs au pouvoir éclaircissant d'un échantillon agréé de même type.
Deux modes opératoires (A et B) sont décrits. Le mode opératoire A est plus rapide que le mode opératoire B et
convient pour essayer un échantillon de pigment. Le mode opératoire B est préférable pour essayer plusieurs
échantillons et particulièrement si un pigment de pouvoir éclaircissant inconnu doit être essayé.
NOTE Chaque fois que cette méthode générale est applicable pour un pigment donné, il devra simplement y être fait référence
dans la Norme internationale relative à ce pigment, et toutes les modifications de détail qui peuvent être nécessaires en raison
des propriétés spéciales du pigment considéré devront être mentionnées dans une note. Ce n'est que dans le cas où cette
méthode générale ne serait pas applicable à un pigment particulier qu'il deviendrait nécessaire de spécifier une méthode spéciale
pour la comparaison du pouvoir éclaircissant des pigments blancs.
2Références normatives
Les documents normatifs suivants contiennent des dispositions qui, par suite de la référence qui y est faite,
constituent des dispositions valables pour la présente partie de l'ISO787. Pour les références datées, les
amendements ultérieurs ou les révisions de ces publications ne s'appliquent pas. Toutefois, les parties prenantes
aux accords fondés sur la présente partie de l'ISO 787 sont invitées à rechercher la possibilité d'appliquer les
éditions les plus récentes des documents normatifs indiqués ci-après. Pour les références non datées, la dernière
édition du document normatif en référence s'applique. Les membres de l'ISO et de la CEI possèdent le registre des
Normes internationales en vigueur.
ISO 788, Pigments d'outremer pour peintures
ISO 15528, Peintures, vernis et matières premières pour peintures et vernis — Échantillonnage
3Réactifs
3.1 Pâte bleue, ayant la composition suivante:
500 g
— huile de ricin, qualité médicinale:
— sulfate de calcium précipité, CaSO ,2H O: 475 g
4 2
— bleu d'outre-mer, conforme aux spécifications de l'ISO 788: 5g
1)
— terre naturelle traitée : 20 g
La pâte doit être préparée comme suit:
Mélanger dans un bécher la terre naturelle traitée avec une quantité suffisante d'huile de ricin pour donner une pâte
uniforme, et ajouter ensuite graduellement le reste d'huile de ricin, en agitant. Chauffer le mélange ainsi obtenu à
1) Une bentonite préparée est un matériau convenable.
©
ISO 2002 – Tous droits réservés 1

---------------------- Page: 6 -----------------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.