ISO 24534-5:2011

Intelligent transport systems — Automatic vehicle and equipment identification — Electronic Registration Identification (ERI) for vehicles — Part 5: Secure communications using symmetrical techniques

ISO 24534 provides the requirements for an electronic registration identification (ERI) using symmetric encryption techniques that are based on an identifier assigned to a vehicle (e.g. for recognition by national authorities) suitable to be used for electronic identification of local and foreign vehicles by national authorities, vehicle manufacturing, in-life maintenance and end-of-life identification (vehicle life-cycle management), adaptation of vehicle data, e.g. in case of international re-sales, safety related purposes, crime reduction, commercial services, and adhering to privacy and data protection regulations. ISO 24534-5:2011 specifies the interfaces for a secure exchange of data between the electronic registration tag (ERT), which is the onboard device containing the ERI data, and the ERI reader or ERI writer in or outside the vehicle using symmetric encryption techniques. Symmetric encryption techniques are based on secret keys shared by a particular community of users, i.e. in closed user groups in which it is trusted that keys are not revealed to outsiders. It includes the interface between an ERT and an onboard ERI reader or writer, the interface between the onboard ERI equipment and (roadside) reading and writing equipment, and security issues related to the communication with the ERT.

Systèmes de transport intelligents — Identification automatique des véhicules et des équipements — Identification d'enregistrement électronique (ERI) pour les véhicules — Partie 5: Communications sécurisées utilisant des techniques symétriques

General Information

• Status: Published
• Publication Date: 13-Dec-2011
• ICS: 03.220.20 - Road transport
• ICS: 35.240.60 - IT applications in transport
• Technical Committee: ISO/TC 204 - Intelligent transport systems
• Drafting Committee: ISO/TC 204 - Intelligent transport systems
• Current Stage: 9060 - Close of review
• Start Date: 02-Sep-2028

Relations

• Amended By: ISO 24534-5:2011/Amd 1:2019 - Intelligent transport systems — Automatic vehicle and equipment identification — Electronic Registration Identification (ERI) for vehicles — Part 5: Secure communications using symmetrical techniques — Amendment 1
• Effective Date: 08-Jan-2022
• Revises: ISO/TS 24534-5:2008 - Automatic vehicle and equipment identification — Electronic Registration Identification (ERI) for vehicles — Part 5: Secure communications using symmetrical techniques
• Effective Date: 06-Jun-2009

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 24534-5
First edition
2011-12-15

Intelligent transport systems —
Automatic vehicle and equipment
identification — Electronic Registration
Identification (ERI) for vehicles —
Part 5:
Secure communications using
symmetrical techniques
Systèmes de transport intelligents — Identification automatique des
véhicules et des équipements — Identification d'enregistrement
électronique (ERI) pour les véhicules —
Partie 5: Communications sécurisées utilisant des techniques
symétriques




Reference number
ISO 24534-5:2011(E)
©
ISO 2011

---------------------- Page: 1 ----------------------
ISO 24534-5:2011(E)

COPYRIGHT PROTECTED DOCUMENT


©  ISO 2011
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56  CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland

ii © ISO 2011 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 24534-5:2011(E)
Contents Page
Foreword . iv
Introduction . v
1  Scope . 1
2  Normative references . 2
3  Terms and definitions . 2
4  Symbols and abbreviations . 8
5  System communications concept . 9
5.1  General . 9
5.2  Overview . 9
5.3  Security services . 13
5.4  Communication architecture description . 14
5.5  Interfaces . 16
6  Interface requirements . 17
6.1  Overview . 17
6.2  Abstract transaction definitions . 17
6.3  The onboard interface to the ERT . 27
6.4  The short-range air interface . 27
6.5  Remote access interface . 29
Annex A (normative) ASN.1 module definitions . 31
Annex B (informative) Operational scenarios . 34
Annex C (normative) PICS pro forma . 37
Bibliography . 39

© ISO 2011 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO 24534-5:2011(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 24534-5 was prepared by Technical Committee ISO/TC 204, Intelligent transport systems.
This first edition of ISO 24534-5 cancels and replaces the first edition of ISO/TS 24534-5:2008.
ISO 24534 consists of the following parts, under the general title Intelligent transport systems — Automatic
vehicle and equipment identification — Electronic Registration Identification (ERI) for vehicles:
 Part 1: Architecture
 Part 2: Operational requirements
 Part 3: Vehicle data
 Part 4: Secure communications using asymmetrical techniques
 Part 5: Secure communications using symmetrical techniques
iv © ISO 2011 – All rights reserved

---------------------- Page: 4 ----------------------
ISO 24534-5:2011(E)
Introduction
A quickly emerging need has been identified within administrations to improve the unique identification of
vehicles for a variety of services. Situations are already occurring where manufacturers intend to fit lifetime
tags to vehicles. Various governments are considering the needs and benefits of electronic registration
identification (ERI), such as legal proof of vehicle identity with potential mandatory usages. There is a
commercial and economic justification both in respect of tags and infrastructure that a standard enable an
interoperable solution.
ERI is a means of uniquely identifying road vehicles. The application of ERI will offer significant benefits over
existing techniques for vehicle identification. It will be an enabling technology for the future management and
administration of traffic and transport, including applications in free flow, multi-lane, traffic conditions with the
capability of supporting mobile transactions. ERI addresses the need of authorities and other users for a
trusted electronic identification, including roaming vehicles.
This part of ISO 24534 specifies the interfaces for the exchange of data between an onboard component
containing the ERI data and an ERI reader or writer inside or outside the vehicle using symmetric
cryptographic techniques.
The exchanged identification data consists of a unique vehicle identifier and can also include data typically
found in the vehicle's registration certificate (see ISO 24534-3 for details). The authenticity of the exchanged
vehicle data can be further enhanced by using symmetric encryption techniques, i.e. techniques based on
secret keys shared by a particular community of users.
The ERI interface defined in this part of ISO 24534 supports confidentiality measures to adhere to
international and national privacy regulations and to prevent other misuse of electronic identification of
vehicles.
Following the events of September 11th, 2001, and the subsequent reviews of anti-terrorism measures, the
need for ERI has been identified as a possible anti-terrorism measure. The need for international
harmonization of such ERI is therefore important. It is also important to ensure that any ERI measures contain
protection against misuse by terrorists.
This part of ISO 24534 makes use of the basic automatic vehicle identification (AVI) provisions already
defined in ISO 14814 and ISO 14816. In addition, it includes provisions for security and the use of additional
registration data of a vehicle.

© ISO 2011 – All rights reserved v

---------------------- Page: 5 ----------------------
INTERNATIONAL STANDARD ISO 24534-5:2011(E)

Intelligent transport systems — Automatic vehicle and
equipment identification — Electronic Registration
Identification (ERI) for vehicles —
Part 5:
Secure communications using symmetrical techniques
1 Scope
This International Standard provides the requirements for an electronic registration identification (ERI) using
symmetric encryption techniques that are based on an identifier assigned to a vehicle (e.g. for recognition by
national authorities), suitable to be used for
 electronic identification of local and foreign vehicles by national authorities,
 vehicle manufacturing, in-life maintenance and end-of-life identification (vehicle life-cycle management),
 adaptation of vehicle data, e.g. in case of international re-sales,
 safety related purposes,
 crime reduction,
 commercial services, and
 adhering to privacy and data protection regulations.
This part of ISO 24534 specifies the interfaces for a secure exchange of data between the electronic
registration tag (ERT), which is the onboard device containing the ERI data, and the ERI reader or ERI writer
in or outside the vehicle using symmetric encryption techniques.
Symmetric encryption techniques are based on secret keys shared by a particular community of users, i.e. in
closed user groups in which it is trusted that keys are not revealed to outsiders.
It includes
 the interface between an ERT and an onboard ERI reader or writer,
 the interface between the onboard ERI equipment and (roadside) reading and writing equipment, and
 security issues related to the communication with the ERT.
NOTE The vehicle identifiers and possible related vehicle information (as typically contained in a vehicle registration
certificate) are defined in ISO 24534-3.
© ISO 2011 – All rights reserved 1

---------------------- Page: 6 ----------------------
ISO 24534-5:2011(E)
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
ISO/IEC 8825-2, Information technology — ASN.1 encoding rules: Specification of Packed Encoding Rules
(PER) — Part 2
ISO 14816, Road transport and traffic telematics — Automatic vehicle and equipment identification —
Numbering and data structure
ISO 15628, Road transport and traffic telematics — Dedicated short range communication (DSRC) — DSRC
application layer
EN 12834, Road transport and traffic telematics — Dedicated Short Range Communication (DSRC) — DSRC
application layer
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
access control
prevention of unauthorized use of a resource, including the prevention of use of a resource in an unauthorized
manner
[ISO 7498-2, definition 3.3.1]
3.2
access control list
list of entities, together with their access rights, which are authorized to have access to a resource
[ISO 7498-2, definition 3.3.2]
3.3
active threat
threat of a deliberate unauthorized change to the state of the system
[ISO 7498-2, definition 3.3.4]
EXAMPLE Modification of messages, replay of messages, insertion of spurious messages, masquerading as an
authorized entity and denial of service.
3.4
additional vehicle data
electronic registration identification (ERI) data in addition to the vehicle identifier
[ISO 24534-3, definition 3.1]
3.5
air interface
conductor-free medium between onboard equipment (OBE) and the reader/interrogator through which the
linking of the onboard equipment (OBE) to the reader/interrogator is achieved by means of electro-magnetic
signals
[ISO 14814, definition 3.2]
2 © ISO 2011 – All rights reserved

---------------------- Page: 7 ----------------------
ISO 24534-5:2011(E)
3.6
authorization
granting of rights, which includes the granting of access based on access rights
[ISO 7498-2, definition 3.3.10]
3.7
challenge
data item chosen at random and sent by the verifier to the claimant, which is used by the claimant, in
conjunction with secret information held by the claimant, to generate a response which is sent to the verifier
[ISO 9798-1, definition 3.3.5]
NOTE In this part of ISO 24534, the term challenge is also used in case an ERT does not have enabled encryption
capabilities and the challenge is merely copied without any secret information applied.
3.8
ciphertext
data produced, through the use of encipherment, the semantic content of which is not available
[ISO 7498-2, definition 3.3.14]
3.9
claimant
entity which is or represents a principal for the purposes of authentication, including the functions necessary
for engaging in authentication exchanges on behalf of a principal
[ISO/IEC 10181-2, definition 3.10]
3.10
cleartext
intelligible data, the semantic content of which is available
[ISO 7498-2, definition 3.3.15]
3.11
confidentiality
property that information is not made available or disclosed to unauthorized individuals, entities, or processes
[ISO 7498-2, definition 3.3.16]
3.12
data integrity
integrity
property that data has not been altered or destroyed in an unauthorized manner
[ISO 7498-2, definition 3.3.21]
3.13
decipherment
decryption
reversal of a corresponding reversible encipherment
[ISO 7498-2, definition 3.23]
© ISO 2011 – All rights reserved 3

---------------------- Page: 8 ----------------------
ISO 24534-5:2011(E)
3.14
distinguishing identifier
information which unambiguously distinguishes an entity
[ISO 9798-1, definition 3.3.9]
3.15
electronic registration identification
ERI
action or act of identifying a vehicle with electronic means for purposes as mentioned in the scope of this part
of ISO 24534
3.16
electronic registration reader
ERR
device used to read or read/write data from or to an electronic registration tag (ERT)
NOTE 1 An ERR communicates directly, i.e. via an OSI data-link, with an ERT.
NOTE 2 An ERR can also be an ERI reader and/or an ERI writer or can act as a relay in the exchange of ERI data
protocol units between an ERT and an ERI reader/writer.
3.17
electronic registration tag
ERT
onboard ERI device that contains the ERI data, including the relevant implemented security provisions and
one or more interfaces to access that data
NOTE 1 In case of high security, the ERT is a type of secure application module (SAM).
NOTE 2 The ERT can be a separate device or can be integrated into an onboard device that also provides other
capabilities (e.g. DSRC communications).
3.18
encipherment
encryption
cryptographic transformation of data to produce ciphertext
NOTE 1 Encipherment can be irreversible, in which case the corresponding decipherment process cannot feasibly be
performed.
NOTE 2 Adapted from ISO 7498-2, definition 3.3.27.
3.19
end-to-end encipherment
encipherment of data within or at the source end system, with the corresponding decipherment occurring only
within or at the destination end system
[ISO 7498-2, definition 3.3.29]
3.20
entity authentication
corroboration that an entity is the one claimed
[ISO 9798-1, definition 3.3.11]
3.21
ERI data
vehicle identifying data which can be obtained from the ERT that consists of the vehicle identifier and possible
additional vehicle data
NOTE Adapted from ISO 24534-3, definition 3.4.
4 © ISO 2011 – All rights reserved

---------------------- Page: 9 ----------------------
ISO 24534-5:2011(E)
3.22
ERI reader
device used to read ERI data directly or indirectly from an ERT by invoking ERI transactions
NOTE 1 In case an ERI reader exchanges the ERI protocol data units directly via a data link with an ERT, it is also
called an ERR. In case it communicates via one or more nodes, only the last node in this sequence is called an ERR. As a
consequence, an external ERI reader can, depending on the onboard configuration, act for some vehicles as an ERR and
for others not.
NOTE 2 See also onboard ERI reader and external ERI reader.
3.23
ERI system operator
organization responsible for the operation of the ERI system and acting as the security authority for the ERI
security domain
3.24
ERI writer
device used to write ERI data directly or indirectly into an ERT by invoking ERI transactions
NOTE 1 In case an ERI writer exchanges the ERI protocol data units directly via a data link with an ERT, it is also
called an ERR. In case it communicates via one or more nodes, only the last node in this sequence is called an ERR. As a
consequence, an external ERI writer can, depending on the onboard configuration, act for some vehicles as an ERR and
for others not.
NOTE 2 See also onboard ERI writer and external ERI writer.
3.25
external ERI reader
ERI reader that is not part of the onboard ERI equipment
NOTE 1 An external ERI reader is not fitted within or on the outside of the vehicle.
NOTE 2 A distinction is made between proximity, short-range (DSRC), and remote external readers. A proximity reader
can e.g. be a PCD (Proximity Coupling Device) as specified in ISO 14443. A short-range external ERI reader can be (a
part of) roadside equipment, hand-held equipment, or mobile equipment. A remote external ERI reader can be part of the
back-office equipment (BOE).
3.26
external ERI writer
ERI writer that is not part of the onboard ERI equipment
NOTE 1 An external ERI writer is not fitted within or on the outside of the vehicle.
NOTE 2 A distinction is made between proximity, short-range (DSRC), and remote external writers. A proximity reader
can e.g. be a proximity coupling device (PCD) as specified in ISO 14443. A short-range external ERI writer can be (a part
of) roadside equipment, hand-held equipment, or mobile equipment. A remote external ERI writer can be part of the back-
office equipment (BOE).
3.27
identification
action or act of establishing identity
NOTE See also vehicle identification.
3.28
key
sequence of symbols that controls the operation of a cryptographic transformation (e.g. encipherment,
decipherment, cryptographic check function computation, signature generation, or signature verification)
[ISO 9798-1, definition 3.3.13]
© ISO 2011 – All rights reserved 5

---------------------- Page: 10 ----------------------
ISO 24534-5:2011(E)
3.29
lifetime
period of time during which an item of equipment exists and functions
NOTE Adapted from ISO 14815, definition 4.8.
3.30
manipulation detection
mechanism which is used to detect whether a data unit has been modified (either accidentally or intentionally)
[ISO 7498-2, definition 3.3.35]
3.31
masquerade
pretence by an entity to be a different entity
[ISO 7498-2, definition 3.3.36]
3.32
mutual authentication
entity authentication which provides both entities with assurance of each other’s identity
[ISO 9798-1, definition 3.3.14]
3.33
onboard ERI equipment
equipment fitted within or on the outside of the vehicle and used for ERI purposes
NOTE The onboard ERI equipment comprises an ERT and can also comprise any additional communication devices.
3.34
onboard ERI reader
ERI reader being part of the onboard ERI equipment
NOTE An onboard ERI reader can e.g. be a proximity coupling device (PCD) as specified in ISO 14443.
3.35
onboard ERI writer
ERI writer being part of the onboard ERI equipment
NOTE An onboard ERI writer can e.g. be a proximity coupling device (PCD) as specified in ISO 14443.
3.36
passive threat
threat of unauthorized disclosure of information without changing the state of the system
[ISO 7498-2, definition 3.3.38]
3.37
principal
entity whose identity can be authenticated
[ISO/IEC 10181-2, definition 3.15]
3.38
privacy
right of individuals to control or influence what information related to them may be collected and stored and by
whom and to whom that information may be disclosed
NOTE Because this term relates to the right of individuals, it cannot be very precise and its use should be avoided
except as a motivation for requiring security.
6 © ISO 2011 – All rights reserved

---------------------- Page: 11 ----------------------
ISO 24534-5:2011(E)
[ISO 7498-2, definition 3.3.43]
3.39
random number
time-variant parameter whose value is unpredictable
[ISO 9798-1, definition 3.3.24]
3.40
registration authority
organization responsible for writing the ERI data and security data into an ERT according to local legislation
NOTE It is expected that the registration authority with respect to the ERI data can be the same authority that keeps
the official register in which the vehicle and its owner or lessee are listed. This is, however, not required by this part of
ISO 24534.
3.41
secret key
key that is used with a symmetric cryptographic algorithm
NOTE 1 Possession of a secret key is restricted (usually to two entities).
NOTE 2 For ERI, there can be only one entity or several entities, depending on the key management policy.
NOTE 3 Adapted from ISO/IEC 10181-1, definition 3.3.15.
3.42
security
protection of information and data so that unauthorized persons or systems cannot read or modify them and
authorized persons or systems are not denied access to them
[ISO 12207, definition 4.39]
NOTE Security versus safety (informal):
Security: protection of a system against its environment; in this context the protection of the ERI system against attacks
or accidents;
Safety: protection of the environment against a system; in this context the protection of the driver, passengers,
vehicle, etc., against dangers of the ERI system.
3.43
security authority
entity that is responsible for the definition, implementation or enforcement of security policy
[ISO/IEC 10181-1, definition 3.3.17]
3.44
security domain
set of elements, security policy, security authority and set of security-relevant activities in which the set of
elements are subject to the security policy for the specified activities, and the security policy is administered
by the security authority for the security domain
[ISO/IEC 10181-1, definition 3.3.20]
3.45
security service
service, provided by a layer of communicating open systems, which ensures adequate security of the systems
or of data transfers
[ISO 7498-2, definition 3.3.51]
© ISO 2011 – All rights reserved 7

---------------------- Page: 12 ----------------------
ISO 24534-5:2011(E)
3.46
sequence number
time variant parameter whose value is taken from a specified sequence which is non-repeating within a certain
time period
[ISO 9798-1, definition 3.3.27]
3.47
system operator
organization responsible for the operation of the system
NOTE For this part of ISO 24534, a system operator also acts as the registration authority and the security authority
in his jurisdiction.
3.48
system operator key
access key for a system operator
3.49
threat
potential violation of security
[ISO 7498-2, definition 3.3.55]
3.50
vehicle identification
action or act of establishing the identity of a vehicle
3.51
verifier
entity which is or represents the entity requiring an authenticated identity
NOTE 1 A verifier includes the functions necessary for engaging in authentication exchanges.
NOTE 2 Adapted from ISO/IEC 10181-2, definition 3.20.
4 Symbols and abbreviations
AEI Automatic Equipment Identification
AES Advanced Encryption Standard
ASN.1 Abstract Syntax Notation One (as defined in ISO 8824)
AVI Automatic Vehicle Identification
BOE Back Office Equipment
DES Data Encryption Standard
EN European Standard (German: Europäische Norm)
ERI Electronic Registration Identification
ERR Electronic Registration Reader: a device used to read or read/write data from or to an ERT
ERT Electronic Registration Tag
8 © ISO 2011 – All rights reserved

---------------------- Page: 13 ----------------------
ISO 24534-5:2011(E)
EU European Union
IEC International Electrotechnical Commission
ISO International Organization for Standardization
OBE Onboard Equipment
OSI Open Systems Interconnection (see ISO/IEC 7498-1)
PICS Protocol Implementation Conformance Statement(s)
PIN Personal Identification Number
SAM Secure Application Module
Triple-DES Triple-Data Encryption Standard
VIN Vehicle Identification Number
5 System communications concept
5.1 General
This clause provides an introduction of the context in which ERI data and security data may be read from or
written into the ERT and in which vehicles can be identified. It also outlines options that may or may not be
used in an actual implementation. The normative requirements for the interfaces are provided in Clause 6 and
Annex A. Annex C contains a form to specify the limitations of an actual communication protocol
implementation.
This clause only deals with interfaces using symmetric encryption techniques. Symmetric encryption
techniques are based on secret keys that are shared by a community of one or more users. Such a
community is essentially a closed user group in which it is trusted that secret keys are not revealed to
outsiders.
It is assumed that the users of the closed user group are all operating within the jurisdiction of one ERI system
operator responsible for key management and acting as the registration authority in his jurisdiction.
A more generic interface based on asymmetric techniques, with various (security) capability levels and
supporting cooperation between multiple (registration) authorities (i.e. multiple security domains) is defined in
ISO 24534-4.
5.2 Overview
5.2.1 Vehicle registration identification
ERI is the action or act of identifying a vehicle with electronic means for purposes as mentioned in the scope
of this part of ISO 24534.
The identifier used to identify a vehicle is called the vehicle identifier or vehicleld.
NOTE The preferred vehicle identifier is the VIN that is assigned to the vehicle by its manufacturer in accordance
with ISO 3779 but alternatives are supported as well. See ISO 24534-3, for details about the vehicle identifier and
additional vehicle data.
© ISO 2011 – All rights reserved 9

---------------------- Page: 14 ----------------------
ISO 24534-5:2011(E)
In this part of ISO 24534, the combination of the almost unique vehicleld and a unique ERT number is used as
the unambiguous distinguishing identifier.
5.2.2 System concept and supported interfaces
Figure 1 presents the interfaces specified in this part of ISO 24534.

Figure 1 — System concept and supported interfaces
The onboard component that provides a secure environment for the ERI data and security data is called the
ERT.
NOTE 1 An implementer may integrate other provisions into the ERT, as long as this does not compromise the security
of the ERT.
An ERT operates in one of two modes:
 Non-commissioned mode,
when the ERT contains no system operator keys.
When operating in the non-commissioned mode, the authentication phase (see below) is not supported
and the only operation allowed is to commission the ERT.
 Commissioned mode,
when a system operator has written its keys into the ERT.
When operating in the commissioned mode the authentication phase (see below) is supported.
A system operator may also decommission an ERT, i.e. delete all key from the ERT. The ERT then returns to
its non-commissioned mode and the only operation allowed is again to commission the ERT.
An ERT is tailored to a specific vehicle in one or more steps:
 First, the ERT is customized with the vehicle identifier and, optionally, additional ERI data.
This step can only be performed once in the lifetime of an ERT.
 Next, the system operator may register changes of the additional ERI data (i.e. the ERI data with the
exception of the vehicle identifier).
ERI data may only be written/updated in commissioned mode and only by the system operator.
It is assumed that all ERT and all onboard and external readers and writers will be part of the same security
domain, i.e. within the jurisdiction of one single ERI system operator responsible for the security policy and its
implementation.
10 © ISO 2011 – All rights reserved

---------------------- Page: 15 ----------------------
ISO 24534-5:2011(E)
It is also assumed that the system operator is also acting as the registration authority in their jurisdiction.
NOTE 2 In order to accommodate the needs of different system operators, different selections of addit
...