ISO/FDIS 17519.2

Gas cylinders — Refillable permanently mounted composite tubes for transportation

Bouteilles à gaz — Tubes composites rechargeables montés de façon permanente pour le transport

General Information

• Status: Withdrawn
• ICS: 23.020.30 - Pressure vessels, gas cylinders
• ICS: 23.020.35 - Gas cylinders
• Technical Committee: ISO/TC 58/SC 3 - Cylinder design
• Drafting Committee: ISO/TC 58/SC 3/WG 35 - Permanently mounted composite tubes
• Current Stage: 5098 - Project deleted
• Completion Date: 26-Feb-2019

Relations

• Replaced By: ISO/TS 17519:2019 - Gas cylinders — Refillable permanently mounted composite tubes for transportation
• Effective Date: 06-Jun-2022

Standards Content (Sample)

FINAL
INTERNATIONAL ISO/FDIS
DRAFT
STANDARD 17519.2
ISO/TC 58/SC 3
Gas cylinders — Refillable
Secretariat: BSI
permanently mounted composite
Voting begins on:
2018­11­27 tubes for transportation
Voting terminates on:
Bouteilles à gaz — Tubes composites rechargeables montés de façon
2019­01­22
permanente pour le transport
RECIPIENTS OF THIS DRAFT ARE INVITED TO
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
Reference number
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO­
ISO/FDIS 17519.2:2018(E)
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN­
DARDS TO WHICH REFERENCE MAY BE MADE IN
©
NATIONAL REGULATIONS. ISO 2018

---------------------- Page: 1 ----------------------
ISO/FDIS 17519.2:2018(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH­1214 Vernier, Geneva
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii © ISO 2018 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/FDIS 17519.2:2018(E)

Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 3
4 Basis for the design requirements . 4
4.1 General . 4
4.2 Design life . 4
4.3 Design number of filling cycles . 4
4.4 Temperature range . 4
4.4.1 Gas temperature . 4
4.4.2 Tube material temperature . 4
4.5 Gas compatibility . 5
4.6 Prohibited gases . 5
4.7 External environment . 5
5 Conformity .
...