ISO/IEC 30108-2:2023

Biometrics — Identity attributes verification services — Part 2: RESTful specification

The ISO/IEC 30108 series defines biometric services used for identity assurance that are invoked over a services-based framework. It provides a generic set of biometric and identity-related functions and associated data definitions to allow remote access to biometric services. Although focused on biometrics, the ISO/IEC 30108 series includes support for other related identity assurance mechanisms such as biographic and document capabilities. Identity attributes verification services (IAVSs) are intended to be compatible with and used in conjunction with other biometric standards as described in ISO/IEC 30108-1. This document implements the specification provided in ISO/IEC 30108-1 using representational state transfer (REST). Specification of biometric functionality is limited to remote (backend) services. Services between a client-side application and biometric capture devices are not within the scope of this document. Integration of biometric services as part of an authentication service or protocol is not within the scope of this document.

Biométrique — Services de vérification des attributs d’identité — Partie 2: Spécification RESTful

General Information

• Status: Published
• Publication Date: 25-Oct-2023
• ICS: 35.240.15 - Identification cards. Chip cards. Biometrics
• Technical Committee: ISO/IEC JTC 1/SC 37 - Biometrics
• Drafting Committee: ISO/IEC JTC 1/SC 37/WG 2 - Biometric technical interfaces
• Current Stage: 6060 - International Standard published
• Start Date: 26-Oct-2023
• Due Date: 23-Jul-2023
• Completion Date: 26-Oct-2023

Standards Content (Sample)

INTERNATIONAL ISO/IEC
STANDARD 30108-2
First edition
2023-10
Biometrics — Identity attributes
verification services —
Part 2:
RESTful specification
Biométrique — Services de vérification des attributs d’identité —
Partie 2: Spécification RESTful
Reference number
ISO/IEC 30108-2:2023(E)
© ISO/IEC 2023

---------------------- Page: 1 ----------------------
ISO/IEC 30108-2:2023(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO/IEC 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii
  © ISO/IEC 2023 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/IEC 30108-2:2023(E)
Contents Page
Foreword .v
Introduction . vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Symbols and abbreviated terms.2
5 Conformance . 2
6 System context . 2
7 Identity assurance services . 3
7.1 General . 3
7.2 Primitive services . 3
7.2.1 Introduction . 3
7.2.2 Add Subject To Gallery . 3
7.2.3 Check Quality. 5
7.2.4 Classify Biometric Data . 7
7.2.5 Create Encounter . 9
7.2.6 Create Subject . 11
7.2.7 Delete Biographic Data .12
7.2.8 Delete Biometric Data .
...

DRAFT INTERNATIONAL STANDARD
ISO/IEC DIS 30108-2
ISO/IEC JTC 1/SC 37 Secretariat: ANSI
Voting begins on: Voting terminates on:
2022-10-31 2023-01-23
Information technology – Identity attributes verification
services —
Part 2:
RESTful specification
ICS: 35.240.15
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
This document is circulated as received from the committee secretariat.
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/IEC DIS 30108-2:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO/IEC 2022

---------------------- Page: 1 ----------------------
ISO/IEC DIS 30108-2:2022(E)
DRAFT INTERNATIONAL STANDARD
ISO/IEC DIS 30108-2
ISO/IEC JTC 1/SC 37 Secretariat: ANSI
Voting begins on: Voting terminates on:

Information technology – Identity attributes verification
services —
Part 2:
RESTful specification
ICS: 35.240.15
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO/IEC 2022
THEREFORE SUBJECT TO CHANGE AND MAY
This document is circulated as received from the committee secretariat.
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: [phone]
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: [e-mail]
NATIONAL REGULATIONS.
Website: www.iso.org ISO/IEC DIS 30108-2:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
  © ISO/IEC 2022 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO/IEC 2022

---------------------- Page: 2 ----------------------
ISO/IEC DIS 30108-2:2022(E)
Contents Page
Foreword .v
Introduction . vi
1 Scope . 1
2 Normative References .1
3 Terms and Definitions .1
4 Symbols and Abbreviated Terms . 1
5 Conformance . 2
6 System Context . .2
6.1 Data formats . 2
7 Biometric Identity Assurance Services .
...

FINAL
INTERNATIONAL ISO/IEC
DRAFT
STANDARD FDIS
30108-2
ISO/IEC JTC 1/SC 37
Information technology – Identity
Secretariat: ANSI
attributes verification services —
Voting begins on:
2023-05-18
Part 2:
Voting terminates on:
RESTful specification
2023-07-13
RECIPIENTS OF THIS DRAFT ARE INVITED TO
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
Reference number
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/IEC FDIS 30108-2:2023(E)
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS. © ISO/IEC 2023

---------------------- Page: 1 ----------------------
ISO/IEC FDIS 30108-2:2023(E)
FINAL
INTERNATIONAL ISO/IEC
DRAFT
STANDARD FDIS
30108-2
ISO/IEC JTC 1/SC 37
Information technology – Identity
Secretariat: ANSI
attributes verification services —
Voting begins on:
Part 2:
Voting terminates on:
RESTful specification
COPYRIGHT PROTECTED DOCUMENT
© ISO/IEC 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
RECIPIENTS OF THIS DRAFT ARE INVITED TO
ISO copyright office
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
CP 401 • Ch. de Blandonnet 8
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
CH-1214 Vernier, Geneva
DOCUMENTATION.
Phone: [phone]
IN ADDITION TO THEIR EVALUATION AS
Reference number
Email: [e-mail]
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO­
ISO/IEC FDIS 30108­2:2023(E)
Website: www.iso.org
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
Published in Switzerland
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN­
DARDS TO WHICH REFERENCE MAY BE MADE IN
ii
  © ISO/IEC 2023 – All rights reserved
NATIONAL REGULATIONS. © ISO/IEC 2023

---------------------- Page: 2 ----------------------
ISO/IEC FDIS 30108-2:2023(E)
Contents Page
Foreword .v
Introduction . vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Symbols and abbreviated terms.1
5 Conformance . 2
6 System context . 2
7 Identity assurance services . 3
7.1 General . 3
7.2 Primitive services . 3
7.2.1 Introduction .
...

DRAFT INTERNATIONAL STANDARD
ISO/IEC FDIS 30108-2
ISO/IEC FDIS 30108-2:2023(E)
Date: 2023-02-2105-04
ISO/IEC JTC 1/SC 37/WG 2
Secretariat: ANSI
BiometricsInformation technology — Identity attributes verification services — Part 2:
RESTful specification

---------------------- Page: 1 ----------------------
ISO/IEC DISFDIS 30108-2:20222023(E)
© ISO/IEC 20222023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no
part of this publication may be reproduced or utilized otherwise in any form or by any means,
electronic or mechanical, including photocopying, or posting on the internet or an intranet, without
prior written permission. Permission can be requested from either ISO at the address below or
ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii © ISO/IEC 20222023 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/IEC DISFDIS 30108-2:20222023(E)
Contents Page
1 Scope .1
2 Normative References .1
3 Terms and Definitions .1
4 Symbols and Abbreviated Terms .1
5 Conformance .2
6 System Context .2
6.1 Data formats .2
7 Biometric Identity Assurance Services .2
7.1 Introduction.2
7.2 Primitive Services .2
7.2.1 Introduction.2
7.2.2 Add Subject To Gallery .3
7.2.3 Check Quality.5
7.2.4 Classify Biometric Data .7
7.2.5 Create Encounter .9
7.2.6 Create Subject . 11
7.2.7 Delete Biographic Data . 12
7.2.8 Delete Biometric Data . 14
7.2.9 Delete Document Data . 16
7.2.10 Delete Encounter . 18
7.2.11 Delete Subject. 20
7.2.12 Delete Subject From Gallery . 21
7.2.13 Get Identify Subject Results . 23
7.2.14 Identify Subject .
...