ISO/IEC ISP 10609-41:1995

Information technology — International Standardized Profiles TB, TC, TD and TE — Connection-mode Transport Service over connection-mode Network Service — Part 41: Definition of profile TD1231

Defines the Profile TD1231. The TD1231 profile is in the TD group which supports Transport protocol class 0.

Technologies de l'information — Profils normalisés internationaux TB, TC, TD et TE — Service de transport en mode connexion sur service de réseau en mode connexion — Partie 41: Définition du profil TD1231

General Information

• Status: Withdrawn
• Publication Date: 26-Dec-1995
• Withdrawal Date: 26-Dec-1995
• ICS: 35.100.05 - Multilayer applications
• Technical Committee: ISO/IEC JTC 1 - Information technology
• Drafting Committee: ISO/IEC JTC 1 - Information technology
• Current Stage: 9599 - Withdrawal of International Standard
• Completion Date: 19-May-2009

Relations

• Consolidated By: ISO 13503-2:2006 - Petroleum and natural gas industries — Completion fluids and materials — Part 2: Measurement of properties of proppants used in hydraulic fracturing and gravel-packing operations
• Effective Date: 06-Jun-2022

Standards Content (Sample)

INTERNATIONAL ISO/IEC
STANDARDIZED
ISP
PROFILE 10609-41
First edition
1995-12-15
Information technology - International
Standardized Profiles TB, TC, TD and
TE - Connection-mode Transport Service
over connection-mode Network Service -
Part 41:
Definition of Profile TDI 231
Technologies de I’informa tion - Profils normalk& interna tionaux TB, TC,
TD et TE - Service de transport en mode connexion sur Service de
rkseau en mode connexion -
Partie 4 7: Definition du Profil TD 1231
Reference number
ISO/lEC ISP 10609-41 :1995(E)

---------------------- Page: 1 ----------------------
ISOPPEC ISP 10609=41:1995(E)
Page
Contents
s.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .“.““.””.~.~.”.”. VI
Introduction
1 Scope .L.“.*”.*.“.“~ “.~ “.~-.~. “~. “.”.~~. “.“.~ “. “‘~*~~~ “~LI*Y~ “~~.I.“‘IILY.”““”‘LI.ii* ”,.L~ ‘l‘.i ‘.L 1
1.1 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .“.“.~ “.“.“.“~~ “‘i~ ”*~ ”.*r*““.“.“**.om .~.~ “.*.~. ‘”.”.~.“,,.“.”*,~ “.,.*““.“““.~~.“,“~ “.~ “.“.~ ‘~1 “~,.
1.2 Position within the taxonomy
1.3 Scenario . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .“.~.““.“.~~. 1
2 Normative references . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . , . . . . . . . . . . . -3
a ./ 3
3 Definitions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -. . . . .- . . . . . . . . . . . -. ,:. i-a . . . . . L.L.,
4
4 Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .~.“.~.“.““.~.“.“.“.“.“.“.
L . .*.j L. .-.4
5 Profile TD123 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .- JVi.-n .-. .) ,.,., a ,. r>,. . . 1)1 ,,. ~,c ~.,
Static conformance requirements . .~.~. ‘.~.~.~.“.~.~.~.~. 4
5.1
5.2 Dynamit conformance requirements . 5
Annex A: ISPICS requirements list (IPRL) . 6
.................................................................................................................. 6
A.1 General options of the Profile
A.2 Standards selected and combined in the Profile . 6
Constraints on base Standards . 6
A.3
........................................................................................................................... 7
A.4 IPRL for CCITT 4.93 1
Annex B: Recommendations . 8
B.1 Introduction . 8
............................................................................................................. 8
B.2 CCITT 4.93 1 recommendations
Annex C: Guidance for implernentors .,.““.“.“.“.“.“.*.*.“.”.“.*.~.,. 9
Network Layer . . . . .*.“.“.“.~.~~*. ”. ””‘”“.“.““.*>*.a.r.u*./ ****.o ““nr~on L “.1.0.Y ” 8 * * “.D *SI f 0 “L0. ” >.~.Y. ““,Y c.1
. . . .~.~.“.~.~.“.“.“.”.“9 .
c.2 Data Link Layer
0 ISO/IEC 1995
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any
means, electronie or mechanical, including photocopying and microfilm, without permission in writing from the publisher.
ISO/IEC Copyright Office l Case postale 56 l CH-121 1 Geneve e Switzerland
Printed in Switzerland
ii

---------------------- Page: 2 ----------------------
0 ISO/IEC ISO/IEC ISP 10609=41:1995(E)
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission)
form the specialized System for worldwide standardization. National bodies that are members of ISO or IEC
participate in the development of International Standards through technical committees established by the respective
organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in
fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO
and IEC, also take part in the work.
In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1.
In addition to developing International Standards, ISO/IEC JTC 1 has created a Special Group on Functional
Standardized
Standardization for the processing of International Profiles.
An International Standardized Profile is an internationally agreed, harmonized document which identifies a Standard
or group of Standards, together with Options and Parameters, necessary to accomplish a function or set of functions.
Draft International Standardized Profiles are circulated to national bodies for voting. Publication as an International
Standardized Profile requires approval by at least 75% of the national bodies casting a vote.
International Standardized Profile ISO/IEC ISP 10609-4 1 was prepared with the collaboration of
- Asia-Oceania Workshop (AOW);
- European Workshop for Open Systems (EWOS);
- Open Systems Environment Implernentors’ Workshop (OIW).
ISO/IEC ISP 10609 consists of the following parts, under the general title Information technology - International
Standardized Profiles TB, TC, TD and TE - Connection-mode Transport Service over connection-mode Network
Service:
Part 1: Subnetwork-type independent requirements for Group TB
Part 2: Subnetwork-type independent requirements for Group TC
Part 3: Subnetwork-type independent requirements for Group TD
Part 4: Subnetwork-type independent requirements for Group TE
Part 5: Definition of proflles TBI 11 I/TBI 121
Part 6: Definition of profiles TC1 11 MC1 121
Part 7: Definition of proBles TDI 1 I l/TDll2 I
Part 8: Definition of profiles TE1 I I IffEI 121
Part 9: Subnetwork-type dependent requirements for Network Layer, Data Link Layer and Physical
Layer concerning permanent access to a packet switched data network using virtual calls
. . .
111

---------------------- Page: 3 ----------------------
ISO/IEC ISP 10609=41:1995(E) 0 ISOAEC
Part 10: LAN subnetwork-dependent, media-independent requirements
Part 11: CSMA/cD LAN subnetwork-dependent, media-dependent requirements
.Part 12: Definition of Profile TUI, provision of the OSI connection-mode Transport Service using
the OSI connection-mode Network Service in an End System attached to a CSMA/cD LAN
Part 14: Definition of Profile TC.53, Provision of the OSI connection-mode Transport Service using
the OSI connection-mode Network Service in an End System attached to a Token Ring LAN
Part 15: Definition of profile TC54, Provision of the OSI connection-mode Transport Service using
the OSI connection-mode Network Service in an End System attached to an FDDI LAN
Part 20: Overview of the generalized multi-part ISP structure for TC and TD Group profiles for OSI
usage of ISDN
Part 21: Subnet-work-type dependent requirements for Network Layer and Data Link Iayer for ISDN
B-channel X.25 DTE to DTE Operation
Part 22: Subnetwork-type dependent requirements for Network Layer and Data Link Layer for ISDN
B-channel X.25 DTE to DCE Operation
Part 23: Subnetwork-type dependent requirements for Network Layer and Data Link Layer for Data
Transfer concerning a packet switched mode Integrated Services Digital Network using virtual calls:
B-channel access case
Part 24: Subnetwork-type dependent requirements for Network Layer and Data Link Layer for Data
Transfer concerning a packet switched mode Integrated Services Digital Network using virtual calls.
D-channel access case
Part 25: Subnetwork-type dependent requirements for Q.93 I circuit-switched Operation
Part 26: Subnetwork-type dependent requirements for Network Layer for Cal1 Control procedures
concerning the outgoing cal1 of a packet switched mode Integrated Services Digital Network in case
B using virtual calls
Part 27: Subnetwork-type dependent requirements for Network Layer for Cal1 Control procedures
concerning the incoming cal1 of a packet switched mode Integrated Services Digital Network in case
B using virtual calls
Part 28: Subnetwork-type dependent requirements for Data Link Layer for end Systems attached to
an ISDN subnetwork
Part 30: Definition of Profile TC1 131
Part 31: Definition of Profile TC1 23 I
Part 32: Definition of Profile TC41 11
Part 33: Definition of proflle TC421 1
Part 34: Definition of Profile TC431 11

---------------------- Page: 4 ----------------------
0 ISO/IEC ISO/IEC PSP 10609-41: 1995(E)
Part 35: Definition of Profile TC431 12
Part 36: Definition of Profile TC4321 1
Part 37: Definition of Profile TC43212
Part 38: Definition of Profile TC4331
Part 40: Definition of Profile TDI 13 I
Part 41: Definition of Profile TD1231
Part 42: Definition of Profile TD4111
Part 43: DeBnition of Profile TD4211
Part 44: Definition of proBle TD43III
Part 45: Definition of Profile TD43I 12
Part 46: Definition of Profile TD43211
Part 47: Definition of Profile TD43212
Part 48: DeBnition of projcile TD4331
Annex A forms an integral part of this part of ISO/IEC ISP 10609. Annexes I3 and C are for information only.

---------------------- Page: 5 ----------------------
0 ISO/IEC
ISO/IEC ISP 10609=41:1995(E)
Introduction
This International Standardized Profile (ISP) is defined in accordance with the principles specified by ISO/IEC
Technical Report 10000, “Information technology - Framework and taxonomy of International Standardized
Profiles ”.
The context of Functional Standardization is one area in the Overall field of Information Technology (IT)
standardization activities, covering base Standards, profiles, and registration mechanisms. A Profile defines a
combination of base Standards that collectively perform a specific well-defined IT function. Profiles standardize
the use of Options and other variations in the base Standards, and provide a base for the development of uniform,
intemationally recognized System tests.
ISPs are produced not simply to “legitimize” a particular choice of base Standards and Options, but to promote
real System interoperability. One of the most important roles for an ISP is to serve as the basis for the
development (by organizations other than ISO and IEC) of intemationally recognized test methods. The
development and widespread acceptance of tests based on this and other ISPs is crucial to the successful
realization of this goal.
ISO/IEC ISP 10609 consists of several Parts of which this is part 41. This part of ISO/IEC ISP 10609 identifies
the specific requirements of Profile TD 123 1, making reference to appropriate material from other Parts of
ISO/IEC ISP 10609 which specify requirements that are subnetwork-type independent, subnetwork-type
dependent or media-dependent. For each individual Profile there is a part of ISO/IEC ISP 10609 which identifies
the specific requirements of that Profile, making reference to other Parts of ISO/IEC ISP 10609.

---------------------- Page: 6 ----------------------
ISO/IEC ISP 10609=41:1995(E)
INTERNATIONAL STANDARDIZED PROFILE 0 ISO/IEC
International Standardized
Information technology -
Connection-mode
Profdes TB, TC, TD and TE -
Transport Service over connection-mode Network
Service -
Part 41:
Definition of Profile TD123 1
1 Scope
11 . General
lSO/IEC ISP 10609 is applicable to end Systems concemed with operating in the Open Systems Interconnection
(OSI) environment. It specifies a combination of OS1 Standards, which collectively provide the connection-mode
Transport Service using the connection-mode Network Service.
This part of ISO/IEC ISP 10609 defines the Profile TD 123 1. The TD123 1 Profile is in the TD Group whic
...