ISO/IEC ISP 10609-44:1995

Information technology — International Standardized Profiles TB, TC, TD and TE — Connection-mode Transport Service over connection-mode Network Service — Part 44: Definition of profile TD43111

Defines the Profile TD43111. The TD43111 profile is in the TD group which supports Transport protocol class 0.

Technologies de l'information — Profils normalisés internationaux TB, TC, TD et TE — Service de transport en mode connexion sur service de réseau en mode connexion — Partie 44: Définition du profil TD43111

General Information

• Status: Withdrawn
• Publication Date: 26-Dec-1995
• Withdrawal Date: 26-Dec-1995
• ICS: 35.100.05 - Multilayer applications
• Technical Committee: ISO/IEC JTC 1 - Information technology
• Drafting Committee: ISO/IEC JTC 1 - Information technology
• Current Stage: 9599 - Withdrawal of International Standard
• Completion Date: 19-May-2009

Relations

• Consolidated By: ISO 12086-1:2006 - Plastics — Fluoropolymer dispersions and moulding and extrusion materials — Part 1: Designation system and basis for specifications
• Effective Date: 06-Jun-2022

Standards Content (Sample)

INTERNATIONAL
ISO/IEC
DARDIZED
ISP
PROFILE
10609-44
First edition
1995-12-15
Information technology - International
Standardized Profiles TB, TC, TD and
TE - Connection-mode Transport Service
over connection-mode Network Service -
Part 44:
Definition of Profile TD43111
Technologies de I’information - Profils normalis& internationaux TB, TC,
TD et TE - Service de transport en mode connexion sur Service de
rbseau en mode connexion -
Partie 44: DGfinition du Profil TD4317 7
Reference number
ISO/1 EC ISP 10609-44: 1995(E)

---------------------- Page: 1 ----------------------
ISO/IEC ISP 10609=44:1995(E)
Page
Contents
. . .
Ill
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .~. “.~.~. ”.
Foreword
vii
. . . . . . . . . . . . . . . . . . .~~. ”.~.~.~. “.~.
Introduction
1
. . . . . . . . .~. ‘.~.~.~~.~.~.
Scope
. . . . . . . . . . . . . . . . . . . . . . .~.~.~. 3
Normative references
3
Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .~.~.~.~.~.~.~.
3
Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .*.*.
4
Profile TD43111 ~.,,0.~.~~.~.,.,,,.~.~.
.......................................... 4
5.1 Subnetwork-type independent requirements
4
............................................
5.2 Subnetwork-type dependent requirements
0 ISO/IEC 1995
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronie or mechanical, including photocopying and microfilm, without Permission in writing from
the publisher.
ISO/IEC Copyright Office l Case postale 56 l CH-1 211 Geneve l Switzerland
Printed in Switzerland
ii

---------------------- Page: 2 ----------------------
0 ISOAEC ISO/IECISP 10609=44:1995(E)
Foreword
ISO (the International Organization for Standardization) and IEC (the International
Electrotechnical Commission) form the specialized System for worldwide
standardization. National bodies that are members of ISO or IEC participate in the
development of International Standards through technical committees established by
the respective organization to deal with particular fields of technical activity. ISO and
IEC technical committees collaborate in fields of mutual interest. Other international
organizations, governmental and non-governmental, in liaison with ISO and IEC, also
take part in the work.
In the field of information technology, ISO and IEC have established a joint technical
committee, ISO/IEC JTC 1. In addition to developing International Standards, ISO/IEC
JTC 1 has created a Special Group on Functional Standardization for the processing sf
International Standardized Profiles.
An International Standardized Profile is an internationally agreed, harmonized
document which identifies a Standard or group of Standards, together with Options and
Parameters, necessary to accomplish a function or set of functions.
Draft International Standardized Profiles are circulated to national bodies for voting.
Publication as an International Standardized Profile requires approval by at least 75%
of the national bodies casting a vote.
International Standardized Profile ISO/IEC ISP 10609-44 was prepared with the
collaboration of
- Asia-Oceania Workshop (AOW);
- European Workshop for Open Systems (EWOS);
- Open Systems Environment Implementors’ Workshop (OIW).
lSO/IEC ISP 10609 consists of the following Parts, under the general title Information
technology - International Standardized Profiles TB, TC, TD and TE - Connection-
mode Transport Service over connection-mode Network Service:
Part 1: Subnetwork-type independent requirements for Group TB
Parf 2: Subnetwork-type independent requirements for Group TC
Part 3: Subnetwork-type independent requirements for Group TD
Part 4: Subnetwork-type independent requirements for Group TE

---------------------- Page: 3 ----------------------
ISO/lECISP 10609=44:1995(E) 0 ISOAEC
Part 5: Definition of profies TB Ill IflB 1121
Pan 6: Definition of profies TC1 11 UTC1 121
Part 7: Definition of profies TD Ill l/TD 1121
Pan 8: Definition of profiles TE Ill UTE 112 1
Part 9: Subnetwork-type dependent requirements for Network Layer, Data
Link Layer and Physical Layer concerning permanent access to a pack&
switched data network using virtual calls
Part IO: LAN subnetwork-dependent, media-independent requirements
Part 11: CSMA/cD LAN subnetwork-dependent, media-dependent
requirements
Part 12: Definition of Profile TC51, Provision sf the OSI connection-mode
Transport Service using the OS/ connection-mode Network Service in an
End System attached to a CSMA/CD LAN
Part 14: Definition of Profile TC53, Provision of the OSI connection-mode
Transport Service using the OS1 connection-mode Network Service in an
End System attached to a Token ßing LAN
Part 15: Definition of profie TC54, Provision of the OSI connection-mode
Transport Service using the OSI connection-mode Network Service in an
End System attached to an FDDI LAN
Part 20: Ovetview of the generalized multi-part ISP structure for TC and TD
Group profiles for OSI usage of ISDN
Part 21: Subnetwork-type dependent requirements for Network Layer and
Data Link Layer for ISDN B-channelX.25 DTE to DTE Operation
Part 22: Subnetwork-type dependent requirements for Network Layer and
Data Link Layer for ISDN B-channel X.25 DTE to DCE Operation
Part 23: Subnetwork-type dependent requirements for Network Layer and
Data Link Layer for Data Transfer concerning a packet switched mode
Integrated Services Digital Network using virtual calls: B-channel access
case

---------------------- Page: 4 ----------------------
ISO/IEC ISP 10609=44:1995(E)
0 ISO/IEC
Part 24: Subnetwork-type dependent requirements for Network Layer and
Data Link Layer for Data Transfer concerning a packet switched mode
Integra ted Services Digital Network using virtual calls: D-channel access
case
Pan 25: Subnetwork-type dependent requirements for Q. 93 1 circuit-
switched Operation
Pan 26: Subnetwork-type dependent recyuirements for Network Layer for
Cal/ Control procedures concerning the outgoing cal/ of a packet switched
mode lntegrated Services Digital Network in case B using virtual calls
Part 27: Subnetwork-type dependent requirements for Network Layer for
Cal/ Control procedures concerning the incoming cal/ of a packet switched
mode Integrated Services Digital Network in case B using virtual calls
Part 28: Subnetwork-type dependent requirements for Data Link Layer for
end Systems attached to an ISDN subnetwork
Pan 30: Definition of Profile TC 113 1
Pan 3 1: Definition of Profile TC123 1
Part 32: Definition of Profile TC4 Ill
Part 33: Definition of Profile TC421 1
Pan 34: Definition of Profile TC431 11
Part 35: Definition of Profile TC43 112
Part 36: Definition of Profile TC4321 1
Part 37: Definition of Profile TC43212
Part 38: Definition of Profile TC4331
Part 40: Definition of Profile TD 113 1
Part 4 1: Definition of Profile TD 123 1
Pan 42: Definition of Profile TD4 111
Part 43: Definition of Profile TD4211

---------------------- Page: 5 ----------------------
ISOAECISP 10609=44:1995(E)
0 ISOAEC
...