ISO/IEC 29110-1-2:2024
(Main)Systems and software engineering — Lifecycle profiles for Very Small Entities (VSEs) — Part 1-2: Vocabulary
Systems and software engineering — Lifecycle profiles for Very Small Entities (VSEs) — Part 1-2: Vocabulary
This document defines the terms common to the ISO/IEC 29110 series. This document is applicable to very small entities (VSEs), and their customers, assessors, standards producers, tool vendors and methodology vendors.
Ingénierie des systèmes et du logiciel — Profils de cycle de vie pour très petits organismes (TPO) — Partie 1-2: Vocabulaire
General Information
Relations
Buy Standard
Standards Content (Sample)
International
Standard
ISO/IEC 29110-1-2
First edition
Systems and software
2024-05
engineering — Lifecycle profiles for
Very Small Entities (VSEs) —
Part 1-2:
Vocabulary
Ingénierie des systèmes et du logiciel — Profils de cycle de vie
pour très petits organismes (TPO) —
Partie 1-2: Vocabulaire
Reference number
ISO/IEC 29110-1-2:2024(en) © ISO/IEC 2024
---------------------- Page: 1 ----------------------
ISO/IEC 29110-1-2:2024(en)
COPYRIGHT PROTECTED DOCUMENT
© ISO/IEC 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
© ISO/IEC 2024 – All rights reserved
ii
---------------------- Page: 2 ----------------------
ISO/IEC 29110-1-2:2024(en)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
Bibliography . 17
Index . 19
© ISO/IEC 2024 – All rights reserved
iii
---------------------- Page: 3 ----------------------
ISO/IEC 29110-1-2:2024(en)
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are
members of ISO or IEC participate in the development of International Standards through technical
committees established by the respective organization to deal with particular fields of technical activity.
ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations,
governmental and non-governmental, in liaison with ISO and IEC, also take part in the work.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of document should be noted. This document was drafted in accordance with the editorial rules of the ISO/
IEC Directives, Part 2 (see www.iso.org/directives or www.iec.ch/members_experts/refdocs).
ISO and IEC draw attention to the possibility that the implementation of this document may involve the
use of (a) patent(s). ISO and IEC take no position concerning the evidence, validity or applicability of any
claimed patent rights in respect thereof. As of the date of publication of this document, ISO and IEC had not
received notice of (a) patent(s) which may be required to implement this document. However, implementers
are cautioned that this may not represent the latest information, which may be obtained from the patent
database available at www.iso.org/patents and https://patents.iec.ch. ISO and IEC shall not be held
responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards
...
International
Standard
ISO/IEC 29110-1-2
First edition
Systems and software
engineering — Lifecycle profiles for
Very Small Entities (VSEs) —
Part 1-2:
Vocabulary
PROOF/ÉPREUVE
Reference number
ISO/IEC 29110-1-2:2024(en) © ISO/IEC 2024
---------------------- Page: 1 ----------------------
ISO/IEC 29110-1-2:2024(en)
COPYRIGHT PROTECTED DOCUMENT
© ISO/IEC 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
PROOF/ÉPREUVE
© ISO/IEC 2024 – All rights reserved
ii
---------------------- Page: 2 ----------------------
ISO/IEC 29110-1-2:2024(en)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
Bibliography . 17
Index . 19
PROOF/ÉPREUVE
© ISO/IEC 2024 – All rights reserved
iii
---------------------- Page: 3 ----------------------
ISO/IEC 29110-1-2:2024(en)
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are
members of ISO or IEC participate in the development of International Standards through technical
committees established by the respective organization to deal with particular fields of technical activity.
ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations,
governmental and non-governmental, in liaison with ISO and IEC, also take part in the work.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of document should be noted. This document was drafted in accordance with the editorial rules of the ISO/
IEC Directives, Part 2 (see www.iso.org/directives or www.iec.ch/members_experts/refdocs).
ISO and IEC draw attention to the possibility that the implementation of this document may involve the
use of (a) patent(s). ISO and IEC take no position concerning the evidence, validity or applicability of any
claimed patent rights in respect thereof. As of the date of publication of this document, ISO and IEC had not
received notice of (a) patent(s) which may be required to implement this document. However, implementers
are cautioned that this may not represent the latest information, which may be obtained from the patent
database available at www.iso.org/patents and https://patents.iec.ch. ISO and IEC shall not be held
responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well a
...
ISO/IEC PRF 29110-1-2:2024(E)
ISO/IEC JTC 1/SC 7
Date: 2024-02-08
Secretariat: BIS
Date: 2024-03-19
Systems and software engineering — Life cycleLifecycle profiles
for very small entitiesVery Small Entities (VSEs) —
Part 1-2:
Vocabulary
Ingénierie des systèmes et du logiciel — Profils de cycle de vie pour très petits organismes (TPO) — Partie
1-2: Vocabulaire
---------------------- Page: 1 ----------------------
FDIS stage
---------------------- Page: 2 ----------------------
ISO/IEC PRF 29110-1-2:2024(Een)
© ISO 2023/IEC 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication
may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying,
or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO
at the address below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: + 41 22 749 01 11
EmailE-mail: copyright@iso.org
Website: www.iso.org
Published in Switzerland
© ISO/IEC 2024 – All rights reserved
iii
© ISO/IEC 2024 – All rights reserved iii
---------------------- Page: 3 ----------------------
ISO/IEC PRF 29110-1-2:2024(Een)
Contents
Foreword . v
Introduction . vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
Bibliography . 21
Index . 24
Table of figures
iv © ISO/IEC 2024 – All rights reserved
© ISO/IEC 2024 – All rights reserved
iv
---------------------- Page: 4 ----------------------
ISO/IEC PRF 29110-1-2:2024(Een)
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are members
of ISO or IEC participate in the development of International Standards through technical committees
established by the respective organization to deal with particular fields of technical activity. ISO and IEC
technical committees collaborate in fields of mutual interest. Other international organizations, governmental
and non-governmental, in liaison with ISO and IEC, also take part in the work.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types of
document should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC
Directives, Part 2 (see www.iso.org/directives or www.iec.ch/members_experts/refdocs).
ISO and IEC draw attention to the possibility that the implementation of this document may involve the use of
(a) patent(s). ISO and IEC take no position concerning the evidence, validity or applicability of any claimed
patent rights in respect thereof. As of the date of publication of this document, ISO and IEC had not received
notice of (a) patent(s) which may be required to implement this document. However, implementers are
cautioned that this may not represent the latest information, which may be obtained from the patent database
available at www.iso.org/patents and https://patents.iec.ch. ISO and IEC shall not be held responsible for
identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessmen
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.