iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ISO

ISO 9211-2:2024

(Main)

Optics and photonics — Optical coatings — Part 2: Optical properties

Optics and photonics — Optical coatings — Part 2: Optical properties

This document indicates how to specify optical properties of coatings and to represent their spectral characterization graphically in the ISO 9211 series, which defines the specifications for optical coatings excluding ophthalmic optics (spectacles). It defines the general characteristics and the test and measurement methods whenever necessary, but is not intended to define the process method.

Optique et photonique — Traitements optiques — Partie 2: Propriétés optiques

Le présent document indique comment spécifier les propriétés optiques de traitements et représenter leur caractérisation spectrale graphiquement dans la série ISO 9211, qui définit les spécifications pour les traitements optiques, à l'exclusion de l'optique ophtalmique (lunettes). Il définit les caractéristiques générales et les méthodes d'essai et de mesure toutes les fois où cela est nécessaire, mais il n'est pas destiné à définir la méthode de fabrication.

General Information

Status
Published
Publication Date
05-Feb-2024
ICS
37.020 - Optical equipment
Technical Committee
ISO/TC 172/SC 3 - Optical materials and components
Drafting Committee
ISO/TC 172/SC 3 - Optical materials and components
Current Stage
6060 - International Standard published
Start Date
06-Feb-2024
Due Date
28-Apr-2024
Completion Date
06-Feb-2024
Ref Project

Relations

Revises
ISO 9211-2:2010 - Optics and photonics — Optical coatings — Part 2: Optical properties
Effective Date
06-Jun-2022

Buy Standard

ISO 9211-2:2024 - Optics and photonics — Optical coatings — Part 2: Optical properties Released:6. 02. 2024ISO 9211-2:2024 - Optics and photonics — Optical coatings — Part 2: Optical properties Released:6. 02. 2024
PreviousNext
Standard
ISO 9211-2:2024 - Optics and photonics — Optical coatings — Part 2: Optical properties Released:6. 02. 2024
English language
18 pages
sale 15% off
Preview
sale 15% off
Preview
ISO/PRF 9211-2 - Optics and photonics — Optical coatings — Part 2: Optical properties Released:15. 12. 2023ISO/PRF 9211-2 - Optics and photonics — Optical coatings — Part 2: Optical properties Released:15. 12. 2023
PreviousNext
Draft
ISO/PRF 9211-2 - Optics and photonics — Optical coatings — Part 2: Optical properties Released:15. 12. 2023
English language
18 pages
sale 15% off
Preview
sale 15% off
Preview
REDLINE ISO/PRF 9211-2 - Optics and photonics — Optical coatings — Part 2: Optical properties Released:15. 12. 2023REDLINE ISO/PRF 9211-2 - Optics and photonics — Optical coatings — Part 2: Optical properties Released:15. 12. 2023
PreviousNext
Draft
REDLINE ISO/PRF 9211-2 - Optics and photonics — Optical coatings — Part 2: Optical properties Released:15. 12. 2023
English language
18 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

International
Standard
ISO 9211-2
Third edition
Optics and photonics — Optical
2024-02
coatings —
Part 2:
Optical properties
Optique et photonique — Traitements optiques —
Partie 2: Propriétés optiques
Reference number
ISO 9211-2:2024(en) © ISO 2024

---------------------- Page: 1 ----------------------
ISO 9211-2:2024(en)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland

© ISO 2024 – All rights reserved
ii

---------------------- Page: 2 ----------------------
ISO 9211-2:2024(en)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Optical properties to be specified . 1
5 Measurement conditions . 2
6 Numerical specification and graphical representation of spectral characteristics . 2
6.1 General .2
6.2 Rules for the numerical specification of spectral characteristics .2
6.3 Rules for the graphical representation of spectral characteristics.3
6.4 Graphical representation of principal optical functions .4
6.4.1 General .4
6.4.2 Reflecting function (RE) .4
6.4.3 Antireflecting function (AR) .5
6.4.4 Beam splitting function (BS) .6
6.4.5 Attenuating function (AT) . .7
6.4.6 Filtering function (FI) .8
6.4.7 Selecting or combining function (SC) .10
6.4.8 Polarizing function (PO) . 12
6.4.9 Phase changing function (PC) . 13
6.4.10 Absorbing function (AB) .
...

International
Standard
ISO 9211-2
Third edition
Optics and photonics — Optical
2024-02
coatings —
Part 2:
Optical properties
Optique et photonique — Traitements optiques —
Partie 2: Propriétés optiques
PROOF/ÉPREUVE
Reference number
ISO 9211-2:2024(en) © ISO 2024

---------------------- Page: 1 ----------------------
ISO 9211-2:2024(en)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
PROOF/ÉPREUVE
© ISO 2024 – All rights reserved
ii

---------------------- Page: 2 ----------------------
ISO 9211-2:2024(en)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Optical properties to be specified . 1
5 Measurement conditions . 2
6 Numerical specification and graphical representation of spectral characteristics . 2
6.1 General .2
6.2 Rules for the numerical specification of spectral characteristics .2
6.3 Rules for the graphical representation of spectral characteristics.3
6.4 Graphical representation of principal optical functions .4
6.4.1 General .4
6.4.2 Reflecting function (RE) .4
6.4.3 Antireflecting function (AR) .5
6.4.4 Beam splitting function (BS) .6
6.4.5 Attenuating function (AT) . .7
6.4.6 Filtering function (FI) .8
6.4.7 Selecting or combining function (SC) .10
6.4.8 Polarizing function (PO) . 12
6.4.9 Phase changing function (PC) . 13
6.4.10 Absorbing function (AB) .
...

Style Definition
...
Style Definition
...
Style Definition
ISO/PRF 9211-2:2023(E) .
Style Definition
...
ISO /TC 172/SC 03 3
Style Definition
...
Style Definition
Secretariat: JISC
...
Style Definition
...
Date: 2023-11-28xx
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
Optics and photonics — Optical coatings —
...
Style Definition
...
Style Definition
...
Style Definition
...
Part 2:
Style Definition
...
Optical properties
Style Definition
...
Optique et photonique — Traitements optiques — —
Style Definition
...
Style Definition
...
Partie 2: Propriétés optiques
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
PROOF
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...

---------------------- Page: 1 ----------------------
ISO/PRF 9211-2:2023(E)
Formatted: Font: 11 pt
Formatted: Font: 11 pt
Formatted: HeaderCentered, Space After: 0 pt, Line
© ISO 2023
spacing: single
Formatted: French (France)
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this
publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical,
Formatted: Left: 1.9 cm, Right: 1.9 cm, Bottom: 1 cm,
including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can Gutter: 0 cm, Header distance from edge: 1.27 cm,
be requested from either ISO at the address below or ISO’s member body in the country of the requester. Footer distance from edge: 0.5 cm
Commented [eXtyles1]: The reference is to a withdrawn
ISO copyright office
standard which has been replaced
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
ISO 20344, Personal protective equipment — Test methods
for footwear
Phone: + 41 22 749 01 11
EmailE-mail: copyright@iso.org
Formatted: Default Paragraph Font, French (France)
Website: www.iso.orgwww.iso.org
Formatted: French (France)
Published in Switzerland
Formatted: Default Paragraph Font, French (France)
Formatted: French (France)
Formatted: No page break before, Adjust space
between Latin and Asian text, Adjust space between
Asian text and numbers, Tab stops: Not at 8.75 cm
Formatted: Adjust space between Latin and Asian text,
Adjust space between Asian text and numbers, Tab
stops: Not at 8.75 cm
Formatted: French (France)
Formatted: French (France)
Formatted: French (France)
Formatted: FooterPageRomanNumber
ii © ISO 2023 – All rights reserved
© ISO 2023 – All rights reserved
ii

---------------------- Page: 2 ----------------------
ISO/PRF 9211-2:2023(E)
Formatted: Font: 11 pt
Formatted: Font: 11 pt
Formatted: HeaderCentered, Left, Space After: 0 pt,
Contents
Line spacing: single
Formatted: Adjust space between Latin and Asian text,
Foreword . v
Adjust space between Asian text and numbers
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Optical properties to be specified. 1
5 Measurement conditions . 2
6 Numerical specification and graphical representation of spectral characteristics . 2
6.1 General . 2
6.2 Rules for the numerical specification of spectral characteristics . 2
6.3 Rules for the graphical representation of spectr
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ISO
ISO 9211-1:2024(Main)
Optics and photonics — Optical coatings — Part 1: Vocabulary

This document defines terms relevant to optical coatings. These terms are grouped in four classes: Terms and definitions, definition of coatings by function, definitions of common coating imperfections and other definitions. This document identifies surface treatments of components and substrates excluding ophthalmic optics (spectacles) by the application of optical coatings and gives a standard form for their specification. It defines the general characteristics and the test and measurement methods whenever necessary, but is not intended to define the process method.

  • Standard
    20 pages
    English language
    sale 15% off
  • Draft
    20 pages
    English language
    sale 15% off
  • Draft
    20 pages
    English language
    sale 15% off
ISO
ISO 9211-3:2024(Main)
Optics and photonics — Optical coatings — Part 3: Environmental durability

ISO 9211 (series) describes surface treatments of components and substrates excluding ophthalmic optics (spectacles) by the application of optical coatings and gives a standard form for their specification. It defines the general characteristics and the test and measurement methods whenever necessary, but it is not intended to define the process method. This document specifies general use and standard categories of use for optical coatings and identifies which environmental tests are necessary to prove that the coatings meet the required specification. The mechanical and chemical properties of coated optical elements, and more generally their environmental durability, can be assessed by a variety of methods. The test methods are generally described in various parts of ISO 9022 and in ISO 9211-4. These test methods are selected to give meaningful results representative of actual exposure of optical elements in their operating environment, alternatively to the minimum requirements as described in ISO 9211-5 to ISO 9211-8, which are coating type related.

  • Standard
    15 pages
    English language
    sale 15% off
  • Draft
    15 pages
    English language
    sale 15% off
  • Draft
    15 pages
    English language
    sale 15% off
ISO
ISO 17411:2022(Main)
Optics and photonics — Optical materials and components — Test method for homogeneity of optical glasses by laser interferometry

This document specifies the measuring method for the homogeneity of the refractive index of optical glasses by laser interferometry to cope with the grades from ISO 10110-18 and ISO 12123.

  • Standard
    27 pages
    English language
    sale 15% off
  • Standard
    27 pages
    French language
    sale 15% off
ISO
ISO 11382:2022(Main)
Optics and photonics — Optical materials and components — Characterization of optical materials used in the infrared spectral range from 0,78 µm to 25 µm

This document provides guidelines for the description of data sheets for infrared materials. It specifies the nomenclature and the properties of infrared materials which are reported on such data sheets. These data sheets do not necessarily contain information on every property identified in this document. This document also specifies the parameters needed to characterize optical materials intended for use in the infrared spectral range from 0,78 µm to 25 µm and provides various methods to be used for measuring these parameters. This document is applicable only to materials used in the manufacture of passive optical components. The properties of materials used in active applications (e.g. optoelectronics) are not taken into account. Materials specified in this document can also transmit in other spectral domains (microwaves, visible or ultraviolet).

  • Standard
    12 pages
    English language
    sale 15% off
  • Draft
    11 pages
    English language
    sale 15% off
  • Draft
    11 pages
    English language
    sale 15% off
ISO
ISO 9211-4:2022(Main)
Optics and photonics — Optical coatings — Part 4: Specific test methods: abrasion, adhesion and resistance to water

ISO 9211 describes surface treatments of components and substrates, excluding ophthalmic optics (spectacles), by the application of optical coatings and gives a standard form for their specification. It defines the general characteristics and the test and measurement methods wherever necessary, but it is not intended to define the process method. This document describes specific test methods of abrasion, adhesion and resistance to water for coating environmental durability tests that are identified in ISO 9211‑3 but not described in other normative references. They are typically performed in sequence with other environmental durability tests, an example is shown in ISO 9211‑3:2008, Annex A.

  • Standard
    15 pages
    English language
    sale 15% off
  • Standard
    16 pages
    French language
    sale 15% off
  • Draft
    15 pages
    English language
    sale 15% off
ISO
ISO 21395-2:2022(Main)
Optics and photonics — Test method for refractive index of optical glasses — Part 2: V-block refractometer method

This document specifies a method to determine the refractive index of optical glass with the accuracy within 3 × 10-5 at the wavelength range from 365 nm to 2 400 nm by using the V-block refractometer method. While this document can be used for non-glass materials, the user is informed that only optical glass has been considered in the development of this document, and other materials can have issues, which have not been taken into consideration.

  • Standard
    26 pages
    English language
    sale 15% off
  • Draft
    26 pages
    English language
    sale 15% off
ISO
ISO 17328:2021(Main)
Optics and photonics — Optical materials and components — Test method for refractive index of infrared optical materials

This document provides a standard method for measuring the relative refractive index to the air of infrared materials used in the infrared spectral range from 0,78 µm to 25 µm. This document excludes methods for measuring the refractive index of birefringent materials and methods for measuring the complex refractive index.

  • Standard
    15 pages
    English language
    sale 15% off
  • Standard
    15 pages
    French language
    sale 15% off
ISO
ISO 9211-7:2021(Main)
Optics and photonics — Optical coatings — Part 7: Minimum requirements for neutral beam splitter coatings

This document specifies minimum requirements on the optical effects and the mechanical, chemical and environmental properties of neutral beam splitter coatings. This document applies to neutral beam splitter coatings for optical applications. Thereby the user is able to rely on defined numerical data while the manufacturer of thin films has the choice for the materials and production method.

  • Standard
    4 pages
    English language
    sale 15% off
  • Standard
    5 pages
    French language
    sale 15% off
  • Draft
    4 pages
    English language
    sale 15% off
  • Draft
    4 pages
    French language
    sale 15% off
ISO
ISO 23364:2021(Main)
Optics and Photonics — Bulk absorption optical filters

This document specifies filter functions of uncoated bulk absorption filters for optical applications excluding ophthalmic optics (spectacles) and gives a standard form for their specification. Additionally, basic definitions and a description of the specification concerning optical bulk absorption filters are given. This document specifies the optical properties of the filters and the test and measurement methods whenever necessary. This document does not specify any material properties (internal quality, homogeneity, etc.) and it does not apply to any production method. This document applies to both the raw material (filter glass, filter plastics, etc.) and the polished component. NOTE 1 Colorimetric parameters for the description of the filter function are specified in e.g. ISO 11664‑1 and ISO 11664‑2. NOTE 2 For filters where the spectral transmission characteristics are achieved by the application of optical coatings, see ISO 9211 series. NOTE 3 In the case of high power applications, further optical effects may occur.

  • Standard
    20 pages
    English language
    sale 15% off
  • Draft
    20 pages
    English language
    sale 15% off
ISO
ISO 21395-1:2020(Main)
Optics and photonics — Test method for refractive index of optical glasses — Part 1: Minimum deviation method

This document specifies the measuring method for the refractive index of optical glasses with the accuracy within 1 × 10−5 used in the spectral range from 365 nm to 2 400 nm. Additional information on how to apply the refractive index in the dispersion and the various dispersion formulae of optical glasses is given in Annex A and Annex B.

  • Standard
    21 pages
    English language
    sale 15% off
  • Draft
    21 pages
    English language
    sale 15% off