iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ISO

ISO 14451-2:2013

(Main)

Pyrotechnic articles — Pyrotechnic articles for vehicles — Part 2: Test methods

Pyrotechnic articles — Pyrotechnic articles for vehicles — Part 2: Test methods

ISO 14451-2:2013 establishes uniform test methods for pyrotechnic articles for vehicles.

Articles pyrotechniques — Articles pyrotechniques pour véhicules — Partie 2: Méthodes d'essai

L'ISO 14451-2:2013 établit des méthodes d'essai uniformes pour les articles pyrotechniques pour véhicules.

General Information

Status
Published
Publication Date
12-Mar-2013
ICS
43.040.80 - Crash protection and restraint systems
Technical Committee
ISO/TC 22/SC 36 - Safety and impact testing
Drafting Committee
ISO/TC 22/SC 36 - Safety and impact testing
Current Stage
9092 - International Standard to be revised
Completion Date
24-Apr-2024
Ref Project

Relations

Consolidates
ISO 20643:2005 - Mechanical vibration — Hand-held and hand-guided machinery — Principles for evaluation of vibration emission
Effective Date
06-Jun-2022

Buy Standard

ISO 14451-2:2013 - Pyrotechnic articles -- Pyrotechnic articles for vehiclesISO 14451-2:2013 - Pyrotechnic articles -- Pyrotechnic articles for vehicles
PreviousNext
Standard
ISO 14451-2:2013 - Pyrotechnic articles -- Pyrotechnic articles for vehicles
English language
25 pages
sale 15% off
Preview
sale 15% off
Preview
ISO 14451-2:2013 - Articles pyrotechniques -- Articles pyrotechniques pour véhiculesISO 14451-2:2013 - Articles pyrotechniques -- Articles pyrotechniques pour véhicules
PreviousNext
Standard
ISO 14451-2:2013 - Articles pyrotechniques -- Articles pyrotechniques pour véhicules
French language
26 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 14451-2
First edition
2013-03-15
Pyrotechnic articles — Pyrotechnic
articles for vehicles —
Part 2:
Test methods
Articles pyrotechniques — Articles pyrotechniques pour véhicules —
Partie 2: Méthodes d’essai
Reference number
ISO 14451-2:2013(E)
©
ISO 2013

---------------------- Page: 1 ----------------------
ISO 14451-2:2013(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2013
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2013 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 14451-2:2013(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Test methods . 1
4.1 Verification of design and documentation . 1
4.2 Drop test . 2
4.3 Vibration and temperature test . 3
4.4 Thermal humidity cycling test . 5
4.5 Electrostatic discharge (ESD) test . 6
4.6 Fire test .10
4.7 Igniter test .12
4.8 Tank test.12
4.9 Functioning test .13
5 Recording .13
Annex A (normative) Definition of temperature build-up time, t .14
e
Annex B (normative) Probit test (PBBS test) .16
Annex C (normative) Bruceton method .22
Bibliography .25
© ISO 2013 – A
...

NORME ISO
INTERNATIONALE 14451-2
Première édition
2013-03-15
Articles pyrotechniques — Articles
pyrotechniques pour véhicules —
Partie 2:
Méthodes d’essai
Pyrotechnic articles — Pyrotechnic articles for vehicles —
Part 2: Test methods
Numéro de référence
ISO 14451-2:2013(F)
©
ISO 2013

---------------------- Page: 1 ----------------------
ISO 14451-2:2013(F)

DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO 2013
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni utilisée
sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie, l’affichage sur
l’internet ou sur un Intranet, sans autorisation écrite préalable. Les demandes d’autorisation peuvent être adressées à l’ISO à
l’adresse ci-après ou au comité membre de l’ISO dans le pays du demandeur.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Publié en Suisse
ii © ISO 2013 – Tous droits réservés

---------------------- Page: 2 ----------------------
ISO 14451-2:2013(F)

Sommaire Page
Avant-propos .iv
1 Domaine d’application . 1
2 Références normatives . 1
3 Termes et définitions . 1
4 Méthodes d’essai . 1
4.1 Vérification de la conception et de la documentation . 1
4.2 Essai de chute . 2
4.3 Essai de résistance à la température et aux vibrations . 3
4.4 Essai de résistance à des cycles température/humidité . 5
4.5 Essai de décharge électrostatique . 6
4.6 Essai au feu .10
4.7 Essai du dispositif de déclenchement .12
4.8 Essai en réservoir .12
4.9 Essai de fonctionnement .13
5 Enregistrement .13
Annexe A (normative) Définition du temps de montée en température, t .14
e
Annexe B (normative) TEST PROBIT (test PBBS) .16
Annexe C (normative) Méthode de Bruceton .22
Bibliographie .26
© ISO 2013 – Tous droits réservés iii

---------------------- Page: 3 ----------------------
ISO 14451-2:2013(F)

Avant-propos
L’ISO (Organisation internationale de normalisation) est une fédération mondi
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ISO
ISO 13215-3:2022(Main)
Road vehicles — Reduction of misuse risk of child restraint systems — Part 3: Prediction and assessment of misuse by Misuse Mode and Effect Analysis (MMEA)

This document specifies a method to predict and quantify misuse of child restraint systems (CRS) called Misuse Mode and Effect Analysis (MMEA). Such misuse can degrade the performance of CRSs. As a predictive method it is intended to be applied by CRS manufacturers at an early stage, before the CRS is put into use by consumers. Being predictive implies the possibility of incompleteness and errors. Such errors can be reduced if the proposed method is supported by field studies (for example, according to ISO 13215-1) and panel method evaluation (for example, according to ISO 13215-2).

  • Standard
    11 pages
    English language
    sale 15% off
ISO
ISO 13215-2:2022(Main)
Road vehicles — Reduction of misuse risk of child restraint systems — Part 2: Requirements and test procedures for correct installation (panel method)

This document specifies the requirements and methods for judging the risk of installation misuse of child restraint systems (CRS) with the help of assigned evaluation panels. The methods described can be used regardless of type of installation of the CRS, e.g. with vehicle seat belts, ISOFIX/LATCH and different types of anti-rotation devices. The installation can include the evaluation of the interface between the child and the CRS, e.g. a harness or an impact shield. This document is intended for technical assessment. It can be applied separately or in conjunction with the MMEA evaluation, described in ISO 13215-3.

  • Standard
    11 pages
    English language
    sale 15% off
ISO
ISO/TS 13396:2021(Main)
Road vehicles — Sled test method to enable the evaluation of side impact protection of child restraint systems — Essential parameters

This document comprises a set of essential input parameters that can be used to develop or evaluate side impact test procedures for child restraint systems. Although children are undoubtedly involved in side impact collisions of differing configurations and severities, these input parameters are, in general, associated with the impact test scenario in UN Regulation No. 95 (lateral collision protection of vehicles). This vehicle type-approval regulation comprises a full-scale crash test in which the stationary test vehicle is struck at right angles by a mobile deformable barrier travelling at 50 km/h. This test scenario is the basis for most of ISO’s previous work on side impact testing for child restraint systems. NOTE Countries and regions that do not recognise UN regulations can evaluate vehicles under different conditions and can apply input parameters that reflect the vehicle crash tests in their own regulatory jurisdictions.

  • Technical specification
    24 pages
    English language
    sale 15% off
ISO
ISO 13216-4:2020(Main)
Road vehicles — Anchorages in vehicles and attachments to anchorages for child restraint systems — Part 4: Lower tether anchorages

This document establishes the positioning zones, dimensions and general and static strength requirements for lower tether anchorages. Lower tether anchorages can be used together with seat bight anchorages according to ISO 13216-1, or with other methods for anchoring child restraint systems (CRS) in road vehicles. This document is applicable to all seating positions, intended by the vehicle manufacturer, for use with rearward-facing CRSs. These seating positions can include outer and mid positions in rear seats (second and third row), as well as the front passenger seat. This document also specifies requirements and strength testing of retrofit lower tether anchorages.

  • Standard
    17 pages
    English language
    sale 15% off
ISO
ISO 12353-1:2020(Main)
Road vehicles — Traffic accident analysis — Part 1: Vocabulary

This document establishes a vocabulary relating to the investigation and analysis of road traffic accidents and to the application of accident data. It also lists other, commonly used terms in the domain. NOTE Additional terms and definitions, related to configuration aspects of road vehicle collisions, can be found in ISO 6813.

  • Standard
    6 pages
    English language
    sale 15% off
ISO
ISO 13216-3:2018(Main)
Road vehicles — Anchorages in vehicles and attachments to anchorages for child restraint systems — Part 3: Classification of child restraint system and space in vehicle

This document classifies the spatial requirements in a vehicle to enable a child restraint system (CRS) to be conveniently mounted. It also specifies the dimensions of child restraint systems, to ensure that they will fit in vehicles. A classification scheme is provided to determine dimensional compatibility between child restraint systems and the available space at specified seating positions in vehicles. The dimensional requirements refer to forward-facing child restraint systems of three size categories, rearward-facing child restraint systems of three size categories, and lateral-facing child restraint systems of two categories. This edition of the document also incorporates size classification of booster systems.

  • Standard
    25 pages
    English language
    sale 15% off
ISO
ISO/TS 22239-2:2018(Main)
Road vehicles — Child seat presence and orientation detection system (CPOD) — Part 2: Resonator specification

This document specifies the child seat presence and orientation detection (CPOD) resonator as part of the CPOD system. It defines the electrical and environmental requirements to be met by the resonators as a condition for CPOD compatibility.

  • Technical specification
    66 pages
    English language
    sale 15% off
ISO
ISO/TS 22239-1:2018(Main)
Road vehicles — Child seat presence and orientation detection system (CPOD) — Part 1: Specifications and test methods

This document specifies a child seat presence detection system that enables child seats placed on any passenger seats to be automatically detected where a child is at risk from an active airbag. The system provides the option of using additional information about the orientation of the child seat. This document specifies the minimum functional requirements in order to ensure compatibility between child seat presence and orientation detection system (CPOD) child seats and CPOD passenger seats. Compatibility measurements and labelling requirements complement the obligatory specifications of this document. This document also provides design recommendations which are not compulsory when claiming compliance with ISO/TS 22239. However, these recommendations, based on experience of proven designs, provide useful guidance to designers to avoid erroneous designs and thus, enable designers to reduce time and cost of CPOD development. The tell-tale "child seat detected" required for a CPOD vehicle, the specific labelling required for a CPOD vehicle and CPOD child seat and the detailed information about the CPOD system functionality required for owner's manuals of CPOD vehicles and CPOD child seats will mitigate considerably the misuse probability. The document does not provide a failsafe physical mechanism that prevents the installation of non-CPOD child seats in a CPOD vehicle or vice versa. ISO/TS 22239 applies only to child restraint systems in which the child is orientated in the forward or rearward driving direction. NOTE 1 Throughout this document, the term "child seat" is used as an abbreviation of "CPOD child seat". NOTE 2 Throughout this document, the term "passenger seat" is used as an abbreviation of "CPOD-equipped passenger seat".

  • Technical specification
    76 pages
    English language
    sale 15% off
ISO
ISO 29061-4:2017(Main)
Road vehicles — Methods and criteria for usability evaluation of child restraint systems and their interface with vehicle anchorage systems — Part 4: Securing of child in child restraint system and daily handling aspects

ISO 29061-4:2017 provides criteria for judgement of usability of child restraint systems (CRS) with regard to the securing of a child in the child seat and other daily handling aspects. ISO 29061-4:2017 provides criteria for judgement of: - ease of availability of instructions; - clarity of instruction manual and labelling; and - the ease of use of design related features of the CRS related to securing the child or child dummy in a CRS installed in vehicle. ISO 29061-4:2017 can be used in conjunction with either ISO 29061-1 or ISO 29061-3 for making a complete usability evaluation of child restraint systems attached to the vehicle with ISOFIX/LATCH or vehicle seat belts. NOTE Booster system usability evaluation, including securing of a child in the booster system, is covered by ISO 29061-5.

  • Standard
    15 pages
    English language
    sale 15% off
ISO
ISO 29061-5:2017(Main)
Road vehicles — Methods and criteria for usability evaluation of child restraint systems and their interface with vehicle anchorage systems — Part 5: Installation and securing of child in a booster system

ISO 29061-5:2017 provides criteria for judgement of usability of booster seat child restraint systems (CRS) when installing them and securing a child. ISO 29061-5:2017 provides criteria for judgement of: - ease of availability of instructions; - clarity of instruction manual and labelling; and - ease of use of design related features of the CRS related to the installation in a vehicle. The procedure can also be used for evaluation of vehicle integrated booster systems. NOTE Although ISOFIX is defined in the original "ISOFIX" standard (ISO 13216‑1) to be a rigid system, the term "ISOFIX" in this document is extended to include flexible CRS attachments (LATCH, UAS).

  • Standard
    18 pages
    English language
    sale 15% off