Textile machinery and accessories — Flat steel healds with closed end loops — Part 2: Dimensions of healds manufactured of hardened strip steel

ISO 363-2:2006 specifies the main dimensions and tolerances of flat steel healds with closed end loops (O-shaped end loops) manufactured of hardened strip steel for use in the textile industry.

Matériel pour l'industrie textile — Lisses en acier plat avec boucles d'extrémités fermées — Partie 2: Dimensions des lisses fabriquées en feuillards d'acier trempé

L'ISO 363-2:2006 spécifie les dimensions principales et les tolérances des lisses en acier plat avec boucles d'extrémités fermées (boucles d'extrémité de forme-O) fabriquées en feuillards d'acier trempé destinées à être utilisées dans l'industrie textile.

General Information

Status
Published
Publication Date
14-Mar-2006
Current Stage
9060 - Close of review
Start Date
02-Dec-2028
Ref Project

Buy Standard

Standard
ISO 363-2:2006 - Textile machinery and accessories -- Flat steel healds with closed end loops
English language
3 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 363-2:2006 - Matériel pour l'industrie textile -- Lisses en acier plat avec boucles d'extrémités fermées
French language
3 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 363-2
First edition
2006-03-15

Textile machinery and accessories — Flat
steel healds with closed end loops —
Part 2:
Dimensions of healds manufactured of
hardened strip steel
Matériel pour l'industrie textile — Lisses en acier plat avec boucles
d'extrémités fermées —
Partie 2: Dimensions des lisses fabriquées en feuillard d'acier trempé




Reference number
ISO 363-2:2006(E)
©
ISO 2006

---------------------- Page: 1 ----------------------
ISO 363-2:2006(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


©  ISO 2006
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland

ii © ISO 2006 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 363-2:2006(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (I
...

NORME ISO
INTERNATIONALE 363-2
Première édition
2006-03-15


Matériel pour l'industrie textile — Lisses
en acier plat avec boucles d'extrémités
fermées —
Partie 2:
Dimensions des lisses fabriquées en
feuillards d'acier trempé
Textile machinery and accessories — Flat steel healds with closed end
loops —
Part 2: Dimensions of healds manufactured of hardened strip steel




Numéro de référence
ISO 363-2:2006(F)
©
ISO 2006

---------------------- Page: 1 ----------------------
ISO 363-2:2006(F)
PDF – Exonération de responsabilité
Le présent fichier PDF peut contenir des polices de caractères intégrées. Conformément aux conditions de licence d'Adobe, ce fichier
peut être imprimé ou visualisé, mais ne doit pas être modifié à moins que l'ordinateur employé à cet effet ne bénéficie d'une licence
autorisant l'utilisation de ces polices et que celles-ci y soient installées. Lors du téléchargement de ce fichier, les parties concernées
acceptent de fait la responsabilité de ne pas enfreindre les conditions de licence d'Adobe. Le Secrétariat central de l'ISO décline toute
responsabilité en la matière.
Adobe est une marque déposée d'Adobe Systems Incorporated.
Les détails relatifs aux produits logiciels utilisés pour la création du présent fichier PDF sont disponibles dans la rubrique General Info
du fichier; les paramètres de création PDF ont été optimisés pour l'impression. Toutes les mesures ont été prises pour garantir
l'exploitation de ce fichier par les comités membres de l'ISO. Dans le cas peu probable où surviendrait un problème d'utilisation,
veuillez en informer le Secrétariat central à l'adresse donnée ci-dessous.


©  ISO 2006
Droits de reproduction réservés. Sauf prescription différente, aucune partie de cette publication ne peut être reproduite ni utilisée sous
quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l'accord écrit
de l'ISO à l'adresse ci-après ou du comité membre de l'ISO dans le pays du demandeur.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax. + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Publié en Suisse

ii © ISO 2006 – Tous droits réservés

---------------------- Page: 2 ----------------------
ISO 363-2:2006(F)
Avant-propos
L'ISO (Organisation internationale de normalisation) est une fédération mondiale d'organismes nationaux de
normalisation (comités membres de l'ISO). L'élaboration des Normes internationales est en général confiée
aux comités techniques de l'ISO. Chaque comité membre intéressé par une étude a le droit de faire partie du
comité technique créé à cet effet. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec l'ISO participent également aux travaux. L'ISO collabore étroitement avec
la Commission électrotechnique internationale (CEI) en ce qui concerne la normalisation électrotechn
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.