This document covers the different types of weaving and knitting machines defined in ISO 5247 (all parts)[2] and ISO 7839[3], respectively.
It is applicable to:
full-width weaving machines with weft insertion by:
shuttles;
rigid, telescopic or flexible rapiers;
projectiles;
hydraulic (waterjet) or by pneumatic (airjet) nozzle;
narrow fabric weaving machines with weft insertion by shuttles or needles;
jacquard machines;
knitting machinery including:
circular knitting;
flat bed knitting;
warp knitting;
raschel;
cotton (flat weft weaving);
other fabric manufacturing machines e.g.:
multi-phase weaving machines;
circular weaving machines;
stitch bonding machines.
NOTE Because of the high requirements on measurement conditions, grade 1 methods are normally not feasible for textile machinery.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document covers the different types of weaving and knitting machines defined in ISO 5247 (all parts)[2] and ISO 7839[3], respectively.
It is applicable to:
full-width weaving machines with weft insertion by:
shuttles;
rigid, telescopic or flexible rapiers;
projectiles;
hydraulic (waterjet) or by pneumatic (airjet) nozzle;
narrow fabric weaving machines with weft insertion by shuttles or needles;
jacquard machines;
knitting machinery including:
circular knitting;
flat bed knitting;
warp knitting;
raschel;
cotton (flat weft weaving);
other fabric manufacturing machines e.g.:
multi-phase weaving machines;
circular weaving machines;
stitch bonding machines.
NOTE Because of the high requirements on measurement conditions, grade 1 methods are normally not feasible for textile machinery.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document covers the different types of weaving and knitting machines defined in ISO 5247 (all parts)[2] and ISO 7839[3], respectively. It is applicable to: full-width weaving machines with weft insertion by: shuttles; rigid, telescopic or flexible rapiers; projectiles; hydraulic (waterjet) or by pneumatic (airjet) nozzle; narrow fabric weaving machines with weft insertion by shuttles or needles; jacquard machines; knitting machinery including: circular knitting; flat bed knitting; warp knitting; raschel; cotton (flat weft weaving); other fabric manufacturing machines e.g.: multi-phase weaving machines; circular weaving machines; stitch bonding machines. NOTE Because of the high requirements on measurement conditions, grade 1 methods are normally not feasible for textile machinery.

  • Standard
    16 pages
    English language
    sale 15% off
  • Standard
    18 pages
    French language
    sale 15% off

2014-09-30: correction - Draft only available 2014-08-27 (see ISO notification in dataservice on 2014-09-30).
2014-06-24: Draft for // ENQ received at ISO/CS ( see ISO notification in dataservice on 2014-06-24).

  • Amendment
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Amendment
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day

2014-09-30: correction - Draft only available 2014-08-27 (see ISO notification in dataservice on 2014-09-30).
2014-06-24: Draft for // ENQ received at ISO/CS ( see ISO notification in dataservice on 2014-06-24).

  • Amendment
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Amendment
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day

2014-09-30: correction - Draft only available 2014-08-27 (see ISO notification in dataservice on 2014-09-30).

  • Amendment
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Amendment
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day

2014-09-30: correction - Draft only available 2014-08-27 (see ISO notification in dataservice on 2014-09-30).

  • Amendment
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Amendment
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    2 pages
    English language
    sale 15% off
  • Standard
    2 pages
    French language
    sale 15% off
  • Standard
    1 page
    English language
    sale 15% off
  • Standard
    1 page
    French language
    sale 15% off

This Part 5 of the standard is a complement to Part 1 and specifies, together with it, the mounting, operating and measuring conditions required for the measurement, declaration and verification of noise emitted by different types of spinning preparatory and spinning machines. It is applicable to engineering methods (grade 2) and survey methods (grade 3) defined in the standards referred to. It concerns machines as listed in ISO 2544 for: - warping, - beaming, - sizing.

  • Amendment
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Amendment
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day

2013-08-21 EMA: Draft for // vote received in ISO/CS (see notification of 2013-08-20 in dataservice).
2012-11-08 GVN: Draft for // ENQ available at ISO/CS (see notification in dataservice on 2012-11-07)

  • Amendment
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Amendment
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    1 page
    English language
    sale 15% off
  • Standard
    1 page
    French language
    sale 15% off

ISO 13435:2011 specifies dimensions and tolerances for bars for drop wires for electrical warp stop motions with continuous contact rail (form E1) or inner split contact rail (form E2).

  • Standard
    3 pages
    English language
    sale 15% off
  • Amendment
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Amendment
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Amendment
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Amendment
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Amendment
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Amendment
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    5 pages
    English language
    sale 15% off
  • Standard
    5 pages
    French language
    sale 15% off
  • Standard
    3 pages
    English language
    sale 15% off
  • Standard
    3 pages
    French language
    sale 15% off

This Part 5 of the standard is a complement to Part 1 and specifies, together with it, the mounting, operating and measuring conditions required for the measurement, declaration and verification of noise emitted by different types of spinning preparatory and spinning machines. It is applicable to engineering methods (grade 2) and survey methods (grade 3) defined in the standards referred to. It concerns machines as listed in ISO 2544 for: - warping, - beaming, - sizing.

  • Amendment
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    1 page
    English language
    sale 15% off
  • Standard
    1 page
    French language
    sale 15% off

This Part 5 of the standard is a complement to Part 1 and specifies, together with it, the mounting, operating and measuring conditions required for the measurement, declaration and verification of noise emitted by different types of spinning preparatory and spinning machines. It is applicable to engineering methods (grade 2) and survey methods (grade 3) defined in the standards referred to. It concerns machines as listed in ISO 2544 for: - warping, - beaming, - sizing.

  • Amendment
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day

ISO 366-2:2009 specifies the dimensions and designation of metal reeds with plate baulk for weaving machines.

  • Standard
    3 pages
    English language
    sale 15% off

ISO 366-3:2009 specifies the dimensions and designation of metal reeds with double-spring baulk for weaving machines.

  • Standard
    3 pages
    English language
    sale 15% off

ISO 9473-1:2006 specifies the dimensions and the designation of cold rolled strip steel used to manufacture dents of reeds according to ISO 366-1, ISO 366-2, ISO 366-3, and 366-4.

  • Standard
    3 pages
    English language
    sale 15% off
  • Standard
    3 pages
    French language
    sale 15% off

ISO 366-5:2006 specifies the dimensions and designation of profile capsules for weaving machine reeds. These capsules are used to manufacture plastic-bound metal reeds according to ISO 366-4.

  • Standard
    3 pages
    English language
    sale 15% off
  • Standard
    3 pages
    French language
    sale 15% off

ISO 9473-2:2006 specifies the dimensions and the designation of hardened strip steel used to manufacture dents of reeds, according to ISO 366-1, ISO 366-2, ISO 366-3, and 366-4.

  • Standard
    4 pages
    English language
    sale 15% off
  • Standard
    4 pages
    French language
    sale 15% off

ISO 363-2:2006 specifies the main dimensions and tolerances of flat steel healds with closed end loops (O-shaped end loops) manufactured of hardened strip steel for use in the textile industry.

  • Standard
    3 pages
    English language
    sale 15% off
  • Standard
    3 pages
    French language
    sale 15% off

ISO 363-1:2006 specifies the main dimensions of flat steel healds with closed end loops (O-shaped end loops) manufactured of rolled steel wire for use in the textile industry.

  • Standard
    3 pages
    English language
    sale 15% off
  • Standard
    3 pages
    French language
    sale 15% off

ISO 8118-1:2006 defines the basic terms and gives the nomenclature, technical specifications and designation for weaving machine temple cylinders used in the textile industry.

  • Standard
    4 pages
    English language
    sale 15% off

ISO 8118-2:2006 defines the basic term and gives the nomenclature, technical specifications and designation for full-width weaving machine temples used in the textile industry.

  • Standard
    3 pages
    English language
    sale 15% off

ISO 15228:2005 specifies the dimensions and designation for reeds used for air jet weaving machines.

  • Standard
    4 pages
    English language
    sale 15% off
  • Standard
    4 pages
    French language
    sale 15% off

ISO 366-4:2005 specifies the dimensions and designation of plastic-bound metal reeds for weaving machines.

  • Standard
    5 pages
    English language
    sale 15% off
  • Standard
    5 pages
    French language
    sale 15% off

This part of ISO 11111 is intended for use by any person concerned with the safety of textile machinery, for example, textile machinery designers, manufacturers, users, systems integrators, safety experts. This part is applicable to machinery plant and related equipment intended to be used for the warping, beaming, sizing, size preparation and storage of warp and cloth beams.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This part of ISO 11111 is intended for use by any person concerned with the safety of textile machinery, for example, textile machinery designers, manufacturers, users, systems integrators, safety experts. This part is applicable to machinery plant and related equipment intended to be used for weaving, knitting and tufting.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day

ISO 11111-5:2005, taken together with ISO 11111-1, specifies significant hazards and corresponding safety requirements and/or measures for preparatory machinery to weaving and knitting. It is applicable to all machinery, plant and related equipment intended to be used for the warping, beaming, sizing, size preparation and storage of warp and cloth beams.

  • Standard
    12 pages
    English language
    sale 15% off
  • Standard
    12 pages
    French language
    sale 15% off

ISO 11111-6:2005, taken together with ISO 11111-1, specifies significant hazards and corresponding safety requirements and/or measures for fabric manufacturing machinery. It is applicable to all machinery, plant and related equipment intended to be used for weaving, knitting and tufting.

  • Standard
    19 pages
    English language
    sale 15% off
  • Standard
    20 pages
    French language
    sale 15% off

ISO 11111-6:2005, taken together with ISO 11111-1, specifies significant hazards and corresponding safety requirements and/or measures for fabric manufacturing machinery. It is applicable to all machinery, plant and related equipment intended to be used for weaving, knitting and tufting.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day

ISO 11111-5:2005, taken together with ISO 11111-1, specifies significant hazards and corresponding safety requirements and/or measures for preparatory machinery to weaving and knitting. It is applicable to all machinery, plant and related equipment intended to be used for the warping, beaming, sizing, size preparation and storage of warp and cloth beams.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day

ISO 5243:2004 gives the principle for the numbering of the heald frames and drop wire bars of the warp stop motions in a loom.

  • Standard
    1 page
    English language
    sale 15% off
  • Standard
    1 page
    French language
    sale 15% off

This Part 5 of the standard is a complement to Part 1 and specifies, together with it, the mounting, operating and measuring conditions required for the measurement, declaration and verification of noise emitted by different types of spinning preparatory and spinning machines. It is applicable to engineering methods (grade 2) and survey methods (grade 3) defined in the standards referred to. It concerns machines as listed in ISO 2544 for: - warping, - beaming, - sizing.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    6 pages
    English language
    sale 15% off
  • Standard
    6 pages
    French language
    sale 15% off

Specifies the dimensions, tolerances and designation of drop wires for mechanical, electromechanical and electrical warp stop motions for weaving machines. Does apply only to drop wires without automatic drawing-in.

  • Standard
    5 pages
    English language
    sale 15% off
  • Standard
    5 pages
    French language
    sale 15% off
  • Standard
    5 pages
    French language
    sale 15% off

Specifies the dimensions, tolerances and designation of drop wires for mechanical, electromechanical and electrical warp stop motions for weaving machines. Does apply only to drop wires suited for automatic drawing-in systems. These drop wires are always closed with an U-shaped thread eylet.

  • Standard
    5 pages
    English language
    sale 15% off
  • Standard
    5 pages
    French language
    sale 15% off
  • Standard
    5 pages
    French language
    sale 15% off

Specifies the coordinated dimensions of heald frames on which the heald-carrying rod is fixed directly on the frame stave.

  • Standard
    7 pages
    English language
    sale 15% off
  • Standard
    7 pages
    French language
    sale 15% off
  • Standard
    7 pages
    French language
    sale 15% off

Specifies the coordinated dimensions of heald frames on which the heald-carrying rod is fixed to the frame stave by rod support.

  • Standard
    8 pages
    English language
    sale 15% off
  • Standard
    8 pages
    French language
    sale 15% off
  • Standard
    8 pages
    French language
    sale 15% off

Specifies the dimensions of guides for heald frames, which are used for supplemental guidance of heald frames.

  • Standard
    3 pages
    English language
    sale 15% off
  • Standard
    3 pages
    French language
    sale 15% off
  • Standard
    3 pages
    French language
    sale 15% off

Speficies the main dimensions and tolerances of flat steel healds with open end loops (C-shaped end loops) for use in the textile industry.

  • Standard
    2 pages
    English language
    sale 15% off
  • Standard
    2 pages
    French language
    sale 15% off
  • Standard
    2 pages
    French language
    sale 15% off

Speficies the main dimensions and tolerances of flat steel healds with open end loops (J-shaped end loops) for use in the textile industry.

  • Standard
    2 pages
    English language
    sale 15% off
  • Standard
    2 pages
    French language
    sale 15% off
  • Standard
    2 pages
    French language
    sale 15% off

Defines the basic terms, lays down the main dimensions and gives specifications of cloth rollers used for winding fabrics and feeding subsequent machines. Specifies the designation of cloth rollers and gives an example for designation. - Replaces the first edition (ISO 6177-1983), clause 3.2 of which has been technically revised.

  • Standard
    4 pages
    English language
    sale 15% off
  • Standard
    4 pages
    French language
    sale 15% off
  • Standard
    4 pages
    French language
    sale 15% off