ISO/IEC ISP 10612-9:1995

Information technology — International Standardized Profile RD — Relaying the MAC service using transparent bridging — Part 9: Profile RD53.54 (Token Ring LAN - FDDI LAN)

Applicable to interworking units concerned with operating in the Open Systems Interconnection (OSI) environment. Specifies a combination of OSI base standards that collectively provide a MAC relay function between LAN subnetworks. Applicable to interworking units operating between Token Ring and FDDI LAN subnetworks. Defines the profile RD53.54.

Technologies de l'information — Profil normalisé international RD — Transmission du service MAC utilisant un pontage transparent — Partie 9: Profil RD53.54 (RLE en anneau à jeton - FDDI RLE)

General Information

• Status: Withdrawn
• Publication Date: 31-May-1995
• Withdrawal Date: 31-May-1995
• ICS: 35.100.05 - Multilayer applications
• Technical Committee: ISO/IEC JTC 1 - Information technology
• Drafting Committee: ISO/IEC JTC 1 - Information technology
• Current Stage: 9599 - Withdrawal of International Standard
• Completion Date: 19-May-2009

Relations

• Consolidated By: ISO 20837:2006 - Microbiology of food and animal feeding stuffs — Polymerase chain reaction (PCR) for the detection of food-borne pathogens — Requirements for sample preparation for qualitative detection
• Effective Date: 06-Jun-2022

Standards Content (Sample)

INTERNATIONAL
ISO/IEC
STANDARDIZED
ISP
PROFILE
10612-9
First edition
1995-06-15
Information technology - International
Standardized Profile RD - Relaying the
MAC Service using transparent bridging -
Part 9:
Profile RD53.54 (Token Ring LAN -
FDDI LAN)
Technologies de I ’information - Profil normalk international RD -
Transmission du Service MAC utiiisant un pontage transparent -
Partie 9: Profil ßD53.54 (RLE en anneau a jeton - FDDI RLE)
Reference number
ISO/IEC ISP 1061 Z-9:1995(E)

---------------------- Page: 1 ----------------------
ISO/IEC BP 10612=9:1995(E)
Page
Contents
Foreword . . . . . . . . . . . . . . . . . . , . . . . . . . . . . . . . . . . . . . . . . . iii
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v
1
1 scope .
................................ 1
1.1 General
................ 1
1.2 Position within the taxonomy
............................... 1
1.3 Scenario
2
2 Normative references . . . . . . . . . . . . . . . . . . . . . . . . . .
3
3 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3
4 Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3
5 Kequirements .
.............. 3
5.1 Static conformance requirements
............ 3
5.2 Dynamit conforrnance requirements
............. 4
Annex A: ISPICS requirements list (normative)
................ 4
A-1 General Options of the Profile
A-2 Base Standards selected and combined in the
4
Profile .
................ 4
A.3 Constraints on base Standards
0 ISO/IEC 1995
All rights reserved. Unless otherwise specified, no part of this publication may be
reproduced or utilized in any form or by any means, electronie or mechanical,
including photocopying and microfilm, without permission in writing from the
publisher.
ISO/IEC Copyright Office . Gase postale 56 l CE-I-121 1 Genkve . Switzerland
Printed in Switzerland
ii

---------------------- Page: 2 ----------------------
0 ISOAEC ISO/IEC ISP 10612=9:1995(E)
Foreword
ISO (the International Organization for Standardization) and IEC (the
International Electrotechnical Commissionj form the specialized System for
worldwide standardization. National bodies that are members of ISO or
IEC participate in the development of International Standards through
technical committees established by the respective organization to deal
with particular fields of technical activity. ISO and IEC technical
committees collaborate in Felds of mutual interest. Other international
organizations, govemmental and non-govemmental, in liaison with ISO
and IEC, also take part in the work.
In the field of information technology, ISO and IEC have established a
joint technical committee, ISO/IEC JTC 1. In addition to developing
International Standards, ISO/IEC JTC 1 has created a Special Group on
Functional Standardization for the processing of International Standardized
Profiles.
An International Standardized Profile is an intemationally agreed,
harmonized document which identifies a Standard or group of Standards,
together with Options and Parameters, necessary to accomplish a function
or a set of functions.
Draft International Standardized Profiles are circulated to national bodies
for voting. Publication as an International Standardized Profile requires
approval by at least 75 % of the national bodies casting a vote.
International Standardized Profile ISOLIEC ISP 106 12-9 was prepared with
the collaboration of
- Asia-Oceania Workshop (AOW);
- European Workshop for Open Systems (EWOS);
- Open Systems Environment Implernentors’ Workshop (OIW).
ISOLIEC ISP 10612 consists of several Parts, under the general title
Information technology - International Standardized ProJile RD - Relaying
the MA C Service using transparent bridging:
Part 1: Subnetwork-independent requirements
- Part 2: CSMAKD LAN subnetwork-dependent,
media-dependent requirements
- Part 3: Token Ring LAN subnetwork-dependent,
media-dependen t requirements
- Part 4: Projile RD51.51 (CSMAKD LAN - CSMAKD
LAN)
. . .
111

---------------------- Page: 3 ----------------------
ISO/IEC ISP 10612=9:1995(E)
0 ISO/IEC
- Part 5: Profile RD51.54 (CSMAKD LAN - FDDI LAN)
t
- Part 6: Profile RD54.54 (FDDI LAN - FDDI LAN)
- Part 7: Profile RLW.53 (C ’SMAKD LAN - Tokm Ring
LAN)
- Part 8: Profile RD53.53 (Token Ring LAN - Token Ring
LAN) -
- Part Y: Profile RD53.54 (Tokm Ring LAN - FDDI LAN)
Annex A forms an integral part of this part of ISO/IEC ISP 10612.

---------------------- Page: 4 ----------------------
0 ISOLIEC ISO/IEC ISP 1061299:1995(E)
Introduction
ISO/IEC ISP 10612 is defined in accordance with the principles specified
by ISO/IEC TK 10000. The context of Functional Standardization is one
area in the Overall Geld of Information Technology (IT) standardization
activities, covering base Standards, profiles, and registration mechanisms.
A Profile defines a combination of base Standards that collectively perform
a specific well-defined IT mnction. Profiles standardize the use of Options
and other variations in the base Standards, and provide a basis for the
development of uniform, intemationally recognized System tests.
ISPs are produced not simply to ‘legitimize’ a particular choice of base
Standards and Options, but to promote real System interoperability. One of
the most important roles for an ISP is to serve as the basis for the
development (by organizations other than ISO and IEC) of intemationally
recognized test methods. The development and widespread acceptance of
tests based on this and other ISPs is crucial to the successful realization
of this goal.
ISO/IEC ISP 10612 consists of several Parts, of which this is part 9.
ISO/IEC ISP 10612-1 specifies the Profile requirements which arc
independent of the subnetwork and media- There are further Parts which
specifl subnetwork-dependent and media-dependent requirements. In
addition, for each individual Profile, there is a part of ISO/IEC ISP 10612
which identifies the specific requirements of that Profile, making reference
to appropriate material from part 1 and from the subnetwork-dependent
parts.

---------------------- Page: 5 ----------------------
0 ISO/IEC
ISO/IEC ISP 1061299:1995(E)
This page is i
ntentional ly left blank
vi

---------------------- Page: 6 ----------------------
INTERNATIONAL STANDARDIZED PROFILE OISO/IEC ISOIIEC ISP 10612=9:1995(E)
International Standardized Profile RD
Information technology -
- Relaying the MAC Service using transparent bridging -
Part 9:
Profile RD53.54 (Token Ring LAN - FDDI LAN)
1 Scope
11 . General
ISO/IEC ISP 106 12 is applicable to intenvorking units concemed with operating in the Open Systems
Interconnection (OSI) en
...