ISO/IEC 14496-4:2004/Amd 24:2008
(Amendment)Information technology — Coding of audio-visual objects — Part 4: Conformance testing — Amendment 24: File format conformance
Information technology — Coding of audio-visual objects — Part 4: Conformance testing — Amendment 24: File format conformance
Technologies de l'information — Codage des objets audiovisuels — Partie 4: Essai de conformité — Amendement 24: Conformité de format de fichier
General Information
Relations
Standards Content (Sample)
INTERNATIONAL ISO/IEC
STANDARD 14496-4
Second edition
2004-12-15
AMENDMENT 24
2008-06-01
Information technology — Coding of
audio-visual objects —
Part 4:
Conformance testing
AMENDMENT 24: File format conformance
Technologies de l'information — Codage des objets audiovisuels —
Partie 4: Essai de conformité
AMENDEMENT 24: Conformité de format de fichier
Reference number
ISO/IEC 14496-4:2004/Amd.24:2008(E)
©
ISO/IEC 2008
---------------------- Page: 1 ----------------------
ISO/IEC 14496-4:2004/Amd.24:2008(E)
PDF disclaimer
PDF files may contain embedded typefaces. In accordance with Adobe's licensing policy, such files may be printed or viewed but shall
not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading a PDF file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create the PDF file(s) constituting this document can be found in the General Info relative to
the file(s); the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the files are suitable for
use by ISO member bodies. In the unlikely event that a problem relating to them is found, please inform the Central Secretariat at the
address given below.
This CD-ROM contains:
1) the publication ISO/IEC 14496-4:2004/Amd.24:2008 in portable document format (PDF), which can
be viewed using Adobe® Acrobat® Reader;
2) electronic attachments relevant to file format conformance.
Adobe and Acrobat are trademarks of Adobe Systems Incorporated.
COPYRIGHT PROTECTED DOCUMENT
© ISO/IEC 2008
All rights reserved. Unless required for installation or otherwise specified, no part of this CD-ROM may be reproduced, stored in a retrieval
system or transmitted in any form or by any means without prior permission from ISO. Requests for permission to reproduce this product
should be addressed to
ISO copyright
...
INTERNATIONAL ISO/IEC
STANDARD 14496-4
Second edition
2004-12-15
AMENDMENT 24
2008-06-01
Information technology — Coding of
audio-visual objects —
Part 4:
Conformance testing
AMENDMENT 24: File format conformance
Technologies de l'information — Codage des objets audiovisuels —
Partie 4: Essai de conformité
AMENDEMENT 24: Conformité de format de fichier
Reference number
ISO/IEC 14496-4:2004/Amd.24:2008(E)
©
ISO/IEC 2008
---------------------- Page: 1 ----------------------
ISO/IEC 14496-4:2004/Amd.24:2008(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
COPYRIGHT PROTECTED DOCUMENT
© ISO/IEC 2008
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO/IEC 2008 – All rights reserved
---------------------- Page: 2 ----------------------
ISO/IEC 14496-4:2004/Amd.24:2008(E)
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are members of
ISO or IEC participate in the development of International Standards through technical committees
established by the respective organization to deal with particular fields of technical activity. ISO and IEC
technical committees collaborate in fields of mutual interest. Other international organizations, governmental
and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information
technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of the joint technical committee is to prepare International Standards. Draft International
Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as
an International Standard requires approval by at least 75 % of the national bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights.
Amendment 24 to ISO/IEC 14496-4:2004 was prepared by Joint Technical Committee ISO/IEC JTC 1,
Information technology, Subcommittee SC 29, Coding of audio, picture, multimedia and hypermedia
information.
© ISO/IEC 2008 – All rights reserved iii
---------------------- Page: 3 ----------------------
ISO/IEC 14496-4:2004/Amd.24:2008(E)
Information technology — Coding of audio-visual objects —
Part 4:
Conformance testing
AMENDMENT 24: File format conformance
Rename the title of 4.7:
4.7 MP4 File Format
to:
4.7 File Format
In 4.7 insert the following subclause: renumbering existing Subclauses 4.7.1 and 4.7.2 as 4.7.2 and 4.7.3
respectively:
4.7.1 Introduction
This subclause describes the conformance suite for the file format standards in MPEG-4. Since these
standards share a lot of technology, their conformance program is being handled together. These standards
are:
1) ISO/IEC 14496-12 (technically identical to ISO/IEC 15444-12): ISO base media file format
2) ISO/IEC 14496-14: MP4 file format
3) ISO/IEC 14496-15: Advanced Video Coding (AVC) file format (Storage of AVC in ISO files)
The purpose of the conformance suite is to cover the set of valid features that may be exercised in the file
format. Media conformance is not covered, though of course in order to exercise the file format features,
media has to be stored.
In order to assure coverage of features, the associated spreadsheet is used to list the features in groups, and
to document which files exercise each feature. Features not currently covered by any file are marked with the
sign “---“.
After 4.7.3: Reading, add the following subclauses:
4.7.4 Process
Those wishing to check the conformance of their implementation should perform the following checks. First, all
conformance should check the “basic box handling” section of the tests, as this is common to all
© ISO/IEC 2008 – All rights reserved 1
---------------------- Page: 4 ----------------------
ISO/IEC 14496-4:2004/Amd.24:2008(E)
specifications. Then, the mandatory features of the selected specification should be checked, and finally, of
course, those optional features that the implementation being checked also covers.
The suite of conformance tests do not currently cover deliberately errored files. However, such files do occur
in practice and implementations should be written to be resilient.
There is no tool provided to check the conformance of files. However, such tools do exist; the reference
software can be used to open files in ‘debug’ mode and provide a listing of what it finds, and other trade
associations and standards bodies may have validation tools tailored to their areas.
4.7.5 Areas tested
The attached Excel document has two spreadsheets. The first briefly lists the areas and features covered, and
then has a column for each proposed file. The second sheet provides a br
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.