iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ISO

ISO 19901-3

(Main)

Oil and gas industries including lower carbon energy — Specific requirements for offshore structures — Part 3: Topsides structure

Oil and gas industries including lower carbon energy — Specific requirements for offshore structures — Part 3: Topsides structure

Industries du pétrole et du gaz, y compris les énergies à faible teneur en carbone — Exigences spécifiques relatives aux structures en mer — Partie 3: Structures Top Sides

General Information

Status
Not Published
ICS
75.180.10 - Exploratory, drilling and extraction equipment
Technical Committee
ISO/TC 67/SC 7 - Offshore structures
Drafting Committee
ISO/TC 67/SC 7 - Offshore structures
Current Stage
6000 - International Standard under publication
Completion Date
09-Nov-2023
Ref Project

Relations

Consolidates
ISO/FDIS 23217 - Injection systems for self-administration by paediatric patients — Requirements and guidelines for design
Effective Date
06-Jun-2022
Revises
ISO 19901-3:2014 - Petroleum and natural gas industries — Specific requirements for offshore structures — Part 3: Topsides structure
Effective Date
06-Jun-2022

Buy Standard

ISO/FDIS 19901-3 - Oil and gas industries including lower carbon energy — Specific requirements for offshore structures — Part 3: Topsides structure Released:8/30/2023ISO/FDIS 19901-3 - Oil and gas industries including lower carbon energy — Specific requirements for offshore structures — Part 3: Topsides structure Released:8/30/2023
PreviousNext
Draft
ISO/FDIS 19901-3 - Oil and gas industries including lower carbon energy — Specific requirements for offshore structures — Part 3: Topsides structure Released:8/30/2023
English language
152 pages
sale 15% off
Preview
sale 15% off
Preview
REDLINE ISO/FDIS 19901-3 - Oil and gas industries including lower carbon energy — Specific requirements for offshore structures — Part 3: Topsides structure Released:8/30/2023REDLINE ISO/FDIS 19901-3 - Oil and gas industries including lower carbon energy — Specific requirements for offshore structures — Part 3: Topsides structure Released:8/30/2023
PreviousNext
Draft
REDLINE ISO/FDIS 19901-3 - Oil and gas industries including lower carbon energy — Specific requirements for offshore structures — Part 3: Topsides structure Released:8/30/2023
English language
152 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

FINAL
INTERNATIONAL ISO/FDIS
DRAFT
STANDARD 19901-3
ISO/TC 67/SC 7
Petroleum and natural gas
Secretariat: BSI
industries — Specific requirements
Voting begins on:
2023-09-13 for offshore structures —
Voting terminates on:
Part 3:
2023-11-08
Topsides structure
Industries du pétrole et du gaz naturel — Exigences spécifiques
relatives aux structures en mer —
Partie 3: Structures Top Sides
ISO/CEN PARALLEL PROCESSING
RECIPIENTS OF THIS DRAFT ARE INVITED TO
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
Reference number
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/FDIS 19901-3:2023(E)
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS. © ISO 2023

---------------------- Page: 1 ----------------------
ISO/FDIS 19901-3:2023(E)
FINAL
INTERNATIONAL ISO/FDIS
DRAFT
STANDARD 19901-3
ISO/TC 67/SC 7
Petroleum and natural gas
Secretariat: BSI
industries — Specific requirements
Voting begins on:
for offshore structures —
Voting terminates on:
Part 3:
Topsides structure
Industries du pétrole et du gaz naturel — Exigences spécifiques
relatives aux structures en mer —
Partie 3: Structures Top Sides
COPYRIGHT PROTECTED DOCUMENT
© ISO 2023
ISO/CEN PARALLEL PROCESSING
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
RECIPIENTS OF THIS DRAFT ARE INVITED TO
ISO copyright office
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
CP 401 • Ch. de Blandonnet 8
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
CH-1214 Vernier, Geneva
DOCUMENTATION.
Phone: +41 22 749 01 11
IN ADDITION TO THEIR EVALUATION AS
Reference number
Email: copyright@iso.org
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/FDIS 19901-3:2023(E)
Website: www.iso.org
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
Published in Switzerland
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
ii
  © ISO 2023 – All rights reserved
NATIONAL REGULATIONS. © ISO 2023

---------------------- Page: 2 ----------------------
ISO/FDIS 19901-3:2023(E)
Contents Page
Foreword .vii
Introduction .x
1 Scope . 1
2 Normative references . 2
3  Terms and definitions . 3
4 Symbols and abbreviated terms.5
4.1 Symbols . 5
4.2 Abbreviated terms . 6
5  Overall requirements .7
5.1 Conceptual design . . . 7
5.2 Codes and standards .
...

ISO/TC 67/SC 7
Date: 2023-05-3008-08
ISO/FDIS 19901-3:2023(E)
ISO/TC 67/SC 7/WG 3
Secretariat: NEN
Petroleum and natural gas industries — Specific requirements for offshore
structures — Part 3: Topsides structure
Industries du pétrole et du gaz naturel — Exigences spécifiques relatives aux structures en
mer — Partie 3: Superstructures

---------------------- Page: 1 ----------------------
ISO/FDIS 19901-3:2023(E)
© ISO 20222023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part
of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or
mechanical, including photocopying, or posting on the internet or an intranet, without prior written
permission. Permission can be requested from either ISO at the address below or ISO’s member body
in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
iv © ISO 2023 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/FDIS 19901-3:2023(E)
Contents

Foreword . 15
Introduction . 18
1 Scope .1
2 Normative references .2
3 Terms and definitions .3
4 Symbols and abbreviated terms .5
4.1 Symbols .5
4.2 Abbreviated terms .6
5 Overall requirements .7
5.1 Conceptual design.7
5.2 Codes and standards .7
5.3 Deck elevation .8
5.4 Exposure level .8
5.5 Operational requirements .9
5.6 Design physical environmental conditions .9
5.7 Critical structure .9
5.8 Assessment of existing topsides structure . 10
5.9 Reuse of topsides structure . 10
5.10 Repairs, modifications and refurbishment . 10
6 Design requirements . 11
6.1 General . 11
6.2 Design/assessment situations . 11
6.3 Material selection . 11
6.4 Structural interfaces .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ISO
ISO 19905-1:2023(Main)
Oil and gas industries including lower carbon energy — Site-specific assessment of mobile offshore units — Part 1: Jack-ups: elevated at a site

This document specifies requirements and provides recommendation and guidance for the elevated site-specific assessment (SSA-E) of independent leg jack‑up units for use in the petroleum and natural gas industries. It addresses: a) occupied non-evacuated, occupied evacuated and unoccupied jack‑ups; b) the installed (or elevated) phase at a specific site. It also addresses the requirement that the as-installed condition matches the assumptions used in the assessment. This document does not address the site-specific assessment of installation and removal (SSA-I). To ensure acceptable reliability, the provisions of this document form an integrated approach, which is used in its entirety for the site-specific assessment of a jack‑up. When assessing a jack-up operating in regions subject to sea ice and icebergs, it is intended that the assessor supplements the provisions of this document with the relevant provisions relating to ice actions contained in ISO 19906 and procedures for ice management contained in ISO 35104. This document does not address design, transit to and from site, or installation and removal from site. This document is applicable only to independent leg mobile jack-up units that are structurally sound and adequately maintained, which is normally demonstrated through holding a valid recognized classification society, classification certificate. Jack‑ups that do not hold a valid recognized classification society certificate are assessed according to the provisions of ISO 19902, supplemented by methodologies from this document, where applicable. NOTE 1 Well conductors can be a safety-critical element for jack‑up operations. However, the integrity of well conductors is not part of the site-specific assessment process for jack‑ups and is, therefore, not addressed in this document. See A.1 for guidance on this topic. NOTE 2 RCS rules and the IMO MODU code (International Maritime Organisation Mobile Offshore Drilling Unit code) provide guidance for the design of jack-ups.

  • Standard
    369 pages
    English language
    sale 15% off
  • Standard
    387 pages
    French language
    sale 15% off
  • Draft
    364 pages
    English language
    sale 15% off
  • Draft
    364 pages
    English language
    sale 15% off
  • Draft
    385 pages
    French language
    sale 15% off
ISO
ISO 19901-8:2023(Main)
Oil and gas industries including lower carbon energy — Offshore structures — Part 8: Marine soil investigations

This document specifies requirements and provides recommendations and guidelines for marine soil investigations regarding: a) objectives, planning and execution of marine soil investigations; b) deployment of investigation equipment; c) drilling and logging; d) in situ testing; e) sampling; f) laboratory testing; g) reporting. Although this document focuses on investigations of soil, it also provides guidance, with less detail, for investigations of chalk, calcareous soils, cemented soils and weak rock. Foundation design is not covered by this document. NOTE 1 ISO 19901‑4 and the respective design standards covering foundation design for the specific types of offshore structures to meet the requirements of application specific standards are given on the ISO website. The results from marine geophysical investigations are, when available and where appropriate, used for planning, optimization and interpretation of marine soil investigations. This document neither covers the planning, execution and interpretation of marine geophysical investigations nor the planning and scope of geohazard assessment studies, only the corresponding marine soil investigations aspects thereof. NOTE 2 ISO 19901-10 covers the planning, execution and interpretation of marine geophysical investigations. This document specifies requirements and provides guidance for obtaining measured values and derived values. This document excludes requirements for determination of design values and representative values. Limited guidance is provided in 11.3 related to data interpretation. This document is intended for clients, soil investigation contractors, designers, installation contractors, geotechnical laboratories and public and regulatory authorities concerned with marine soil investigations for any type of offshore structures, or geohazard assessment studies.

  • Standard
    154 pages
    English language
    sale 15% off
  • Standard
    161 pages
    French language
    sale 15% off
  • Draft
    153 pages
    English language
    sale 15% off
  • Draft
    153 pages
    English language
    sale 15% off
  • Draft
    162 pages
    French language
    sale 15% off
ISO
ISO 19901-2:2022(Main)
Petroleum and natural gas industries — Specific requirements for offshore structures — Part 2: Seismic design procedures and criteria

This document contains requirements for defining the seismic design procedures and criteria for offshore structures; guidance on the requirements is included in Annex A. The requirements focus on fixed steel offshore structures and fixed concrete offshore structures. The effects of seismic events on floating structures and partially buoyant structures are briefly discussed. The site-specific assessment of jack-ups in elevated condition is only covered in this document to the extent that the requirements are applicable. Only earthquake-induced ground motions are addressed in detail. Other geologically induced hazards such as liquefaction, slope instability, faults, tsunamis, mud volcanoes and shock waves are mentioned and briefly discussed. The requirements are intended to reduce risks to persons, the environment, and assets to the lowest levels that are reasonably practicable. This intent is achieved by using: a) seismic design procedures which are dependent on the exposure level of the offshore structure and the expected intensity of seismic events; b) a two-level seismic design check in which the structure is designed to the ultimate limit state (ULS) for strength and stiffness and then checked to abnormal environmental events or the abnormal limit state (ALS) to ensure that it meets reserve strength and energy dissipation requirements. Procedures and requirements for a site-specific probabilistic seismic hazard analysis (PSHA) are addressed for offshore structures in high seismic areas and/or with high exposure levels. However, a thorough explanation of PSHA procedures is not included. Where a simplified design approach is allowed, worldwide offshore maps, which are included in Annex B, show the intensity of ground shaking corresponding to a return period of 1 000 years. In such cases, these maps can be used with corresponding scale factors to determine appropriate seismic actions for the design of a structure, unless more detailed information is available from local code or site-specific study. NOTE For design of fixed steel offshore structures, further specific requirements and recommended values of design parameters (e.g. partial action and resistance factors) are included in ISO 19902, while those for fixed concrete offshore structures are contained in ISO 19903. Seismic requirements for floating structures are contained in ISO 19904, for site-specific assessment of jack-ups and other MOUs in the ISO 19905 series, for arctic structures in ISO 19906 and for topsides structures in ISO 19901‑3.

  • Standard
    55 pages
    English language
    sale 15% off
  • Standard
    59 pages
    French language
    sale 15% off
ISO
ISO 19901-5:2021(Main)
Petroleum and natural gas industries — Specific requirements for offshore structures — Part 5: Weight management

This document specifies requirements for managing and controlling the weight and centre of gravity (CoG) of offshore facilities by means of mass management during all lifecycle phases including; conceptual design, front end engineering design (FEED), detail engineering, construction and operations. These can be new facilities (greenfield) or modifications to existing facilities (brownfield). Weight management is necessary throughout operations, decommissioning and removal to facilitate structural integrity management (SIM). The provisions of this document are applicable to fixed and floating facilities of all types. Weight management only includes items with static mass. Snow and ice loads are excluded as they are not considered to be part of the facility. Dynamic loads are addressed in ISO 19904-1, ISO 19901-6 and ISO 19901-7. This document specifies: a) requirements for managing and controlling weights and CoGs of assemblies and entire facilities; b) requirements for managing weight and CoG interfaces; c) standardized terminology for weight and CoG estimating and reporting; d) requirements for determining not-to-exceed (NTE) weights and budget weights; e) requirements for weighing and determination of weight and centre of gravity (CoG) of tagged equipment, assemblies, modules and facilities; This document can be used: f) as a basis for costing, scheduling or determining suitable construction method(s) or location(s) and installation strategy; g) as a basis for planning, evaluating and preparing a weight management plan and reporting system; h) as a contract reference; i) as a means of refining the structural analysis or model.

  • Standard
    65 pages
    English language
    sale 15% off
  • Standard
    71 pages
    French language
    sale 15% off
  • Standard
    71 pages
    French language
    sale 15% off
  • Draft
    64 pages
    English language
    sale 15% off
ISO
ISO 19901-10:2021(Main)
Petroleum and natural gas industries — Specific requirements for offshore structures — Part 10: Marine geophysical investigations

This document provides requirements and guidelines for marine geophysical investigations. It is applicable to operators/end users, contractors and public and regulatory authorities concerned with marine site investigations for offshore structures for petroleum and natural gas industries. This document provides requirements, specifications, and guidance for: a) objectives, planning, and quality management; b) positioning; c) seafloor mapping, including instrumentation and acquisition parameters, acquisition methods, and deliverables; d) sub-seafloor mapping, including seismic instrumentation and acquisition parameters, and non-seismic-reflection methods; e) reporting; f) data integration, interpretation, and investigation of geohazards. This document is applicable to investigation of the seafloor and the sub-seafloor, from shallow coastal waters to water depths of 3 000 m and more. It provides guidance for the integration of the results from marine soil investigations and marine geophysical investigations with other relevant datasets. NOTE 1 The depth of interest for sub-seafloor mapping depends on the objectives of the investigation. For offshore construction, the depths of investigation are typically in the range 1 m below seafloor to 200 m below seafloor. Some methods for sub-seafloor mapping can also achieve much greater investigation depths, for example for assessing geohazards for hydrocarbon well drilling. There is a fundamental difference between seafloor mapping and sub-seafloor mapping: seafloor signal resolution can be specified, while sub-seafloor signal resolution and penetration cannot. This document therefore contains requirements for the use of certain techniques for certain types of seafloor mapping and sub-seafloor mapping (similarly, requirements are given for certain aspects of data processing). If other techniques can be shown to obtain the same information, with the same or better resolution and accuracy, then those techniques may be used. Mapping of pre-drilling well-site geohazards beneath the seafloor is part of the scope of this document. NOTE 2 This implies depths of investigation that are typically 200 m below the first pressure-containment casing string or 1 000 m below the seafloor, whichever is greatest. Mapping of pre-drilling well-site geohazards is therefore the deepest type of investigation covered by this document. In this document, positioning information relates only to the positioning of survey platforms, sources and receivers. The processes used to determine positions of seafloor and sub-seafloor data points are not covered in this document. Guidance only is given in this document for the use of marine shear waves (A.8.3.3), marine surface waves (A.8.3.4), electrical resistivity imaging (A.8.3.5) and electromagnetic imaging (A.8.3.6).

  • Standard
    81 pages
    English language
    sale 15% off
  • Standard
    86 pages
    French language
    sale 15% off
  • Standard
    86 pages
    French language
    sale 15% off
  • Draft
    79 pages
    English language
    sale 15% off
ISO
ISO 19905-3:2021(Main)
Petroleum and natural gas industries — Site-specific assessment of mobile offshore units — Part 3: Floating units

This document specifies requirements and recommendations for the site-specific assessment of mobile floating units for use in the petroleum and natural gas industries. It addresses the installed phase, at a specific site, of manned non-evacuated, manned evacuated and unmanned mobile floating units. This document addresses mobile floating units that are monohull (e.g. ship-shaped vessels or barges); column-stabilized, commonly referred to as semi-submersibles; or other hull forms (e.g. cylindrical/conical shaped). It is not applicable to tension leg platforms. Stationkeeping can be provided by a mooring system, a thruster assisted mooring system, or dynamic positioning. The function of the unit can be broad, including drilling, floatel, tender assist, etc. In situations where hydrocarbons are being produced, there can be additional requirements. This document does not address all site considerations, and certain specific locations can require additional assessment. This document is applicable only to mobile floating units that are structurally sound and adequately maintained, which is normally demonstrated through holding a valid RCS classification certificate. This document does not address design, transportation to and from site, or installation and removal from site. This document sets out the requirements for site-specific assessments, but generally relies on other documents to supply the details of how the assessments are to be undertaken. In general: — ISO 19901‑7 is referenced for the assessment of the stationkeeping system; — ISO 19904‑1 is referenced to determine the effects of the metocean actions on the unit; — ISO 19906 is referenced for arctic and cold regions; — the hull structure and air gap are assessed by use of a comparison between the site-specific metocean conditions and its design conditions, as set out in the RCS approved operations manual; — ISO 13624‑1 and ISO/TR 13624‑2[1] are referenced for the assessment of the marine drilling riser of mobile floating drilling units. Equivalent alternative methodologies can be used; — IMCA M 220 is referenced for developing an activity specific operating guidelines. Agreed alternative methodologies can be used. NOTE RCS rules and the IMO MODU code[13] provide guidance for design and general operation of mobile floating units.

  • Standard
    22 pages
    English language
    sale 15% off
  • Standard
    25 pages
    French language
    sale 15% off
  • Draft
    22 pages
    English language
    sale 15% off
  • Draft
    24 pages
    French language
    sale 15% off
ISO
ISO 19902:2020(Main)
Petroleum and natural gas industries — Fixed steel offshore structures

This document specifies requirements and provides recommendations applicable to the following types of fixed steel offshore structures for the petroleum and natural gas industries: ? caissons, free-standing and braced; ? jackets; ? monotowers; ? towers. In addition, it is applicable to compliant bottom founded structures, steel gravity structures, jack-ups, other bottom founded structures and other structures related to offshore structures (such as underwater oil storage tanks, bridges and connecting structures). This document contains requirements for planning and engineering of the design, fabrication, transportation and installation of new structures as well as, if relevant, their future removal. NOTE 1 Specific requirements for the design of fixed steel offshore structures in arctic environments are presented in ISO 19906. NOTE 2 Requirements for topsides structures are presented in ISO 19901-3; for marine operations in, ISO 19901‑6; for structural integrity management, in ISO 19901-9 and for the site-specific assessment of jack-ups, in ISO 19905‑1.

  • Standard
    565 pages
    English language
    sale 15% off
  • Draft
    565 pages
    English language
    sale 15% off
ISO
ISO 19903:2019(Main)
Petroleum and natural gas industries — Concrete offshore structures

This document specifies requirements and provides recommendations applicable to fixed, floating and grounded concrete offshore structures for the petroleum and natural gas industries and for structures supporting nationally-important power generation, transmission or distribution facility. This document specifically addresses — the design, construction, transportation and installation of new structures, including requirements for in-service inspection and possible removal of structures, — the assessment of structures in service, and — the assessment of structures for reuse at other locations. This document is intended to cover the engineering processes needed for the major engineering disciplines to establish a facility for offshore operation.

  • Standard
    115 pages
    English language
    sale 15% off
  • Standard
    128 pages
    French language
    sale 15% off
  • Standard
    128 pages
    French language
    sale 15% off
ISO
ISO 19901-9:2019(Main)
Petroleum and natural gas industries — Specific requirements for offshore structures — Part 9: Structural integrity management

This document specifies principles for the structural integrity management (SIM) of offshore structures subjected to known or foreseeable types of actions. This document specifies requirements and provides recommendations applicable to the following types of fixed steel offshore structures for the petroleum and natural gas industries: — caissons, free-standing and braced; — jackets; — monotowers; — towers. This document is applicable to topsides, including but not limited to the main decks, deck legs, topsides modules, crane pedestals, helideck, drilling derrick, skid beams, flare booms, exhaust towers, radio tower, conductor support frames, and lifeboat davits. In addition, it is applicable to compliant bottom founded structures, steel gravity structures, jack-ups, other bottom founded structures and other structures related to offshore structures (e.g. underwater oil storage tanks, bridges and connecting structures), to the extent to which its requirements are relevant. This document contains requirements for planning and engineering of the following tasks: a) integrity management data requirements; b) in-service inspection and integrity management of both new and existing structures; c) assessment of existing structures; d) evaluation of structures for reuse at different locations; e) evaluation of structures for their future removal.

  • Standard
    143 pages
    English language
    sale 15% off
  • Standard
    158 pages
    French language
    sale 15% off
ISO
ISO 19906:2019(Main)
Petroleum and natural gas industries — Arctic offshore structures

This document specifies requirements and provides recommendations and guidance for the design, construction, transportation, installation and decommissioning of offshore structures related to the activities of the petroleum and natural gas industries in arctic and cold regions. Reference to arctic and cold regions in this document is deemed to include both the Arctic and other locations characterized by low ambient temperatures and the presence or possibility of sea ice, icebergs, icing conditions, persistent snow cover, and/or permafrost. The objective of this document is to ensure that complete structures, including substructures, topsides structures, floating production vessel hulls, foundations and mooring systems, in arctic and cold regions provide an appropriate level of reliability with respect to personnel safety, environmental protection and asset value. Value includes value to the owner, to the industry and to society in general. This document does not contain requirements for the operation, maintenance, service-life inspection or repair of arctic and cold region offshore structures, unless the design strategy imposes specific requirements such as ice management (IM) to reduce ice actions. Provisions for the operation, maintenance, service‐life inspection and repair of mobile units are given in ISO 19905-1 and ISO 19905-3, supplemented by the provisions relating to ice actions and IM in this document. This document does not apply to mechanical, process and electrical equipment or any specialized process equipment associated with arctic and cold region offshore operations except in so far as it is necessary for the structure to sustain safely the actions imposed by the installation, housing and operation of such equipment. This document applies to equipment used for the positioning and disconnection of floating structures (see Clause 13).

  • Standard
    546 pages
    English language
    sale 15% off