ISO 5942

Bamboo-wood composite for container flooring

Titre manque

General Information

• Status: Not Published
• ICS: 55.180.10 - General purpose containers
• Technical Committee: ISO/TC 296 - Bamboo and rattan
• Drafting Committee: ISO/TC 296 - Bamboo and rattan
• Current Stage: 6000 - International Standard under publication
• Completion Date: 25-Jun-2024

Standards Content (Sample)

FINAL DRAFT
International
Standard
ISO/FDIS 5942
ISO/TC 296
Bamboo-wood composite for
Secretariat: SAC
container flooring
Voting begins on:
2024-04-29
Voting terminates on:
2024-06-24
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT,
WITH THEIR COMMENTS, NOTIFICATION OF ANY
RELEVANT PATENT RIGHTS OF WHICH THEY ARE AWARE
AND TO PROVIDE SUPPOR TING DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO­
LOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE
TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL
TO BECOME STAN DARDS TO WHICH REFERENCE MAY BE
MADE IN NATIONAL REGULATIONS.
Reference number
ISO/FDIS 5942:2024(en) © ISO 2024

FINAL DRAFT
ISO/FDIS 5942:2024(en)
International
Standard
ISO/FDIS 5942
ISO/TC 296
Bamboo-wood composite for
Secretariat: SAC
container flooring
Voting begins on:
Voting terminates on:
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT,
WITH THEIR COMMENTS, NOTIFICATION OF ANY
RELEVANT PATENT RIGHTS OF WHICH THEY ARE AWARE
AND TO PROVIDE SUPPOR TING DOCUMENTATION.
© ISO 2024
IN ADDITION TO THEIR EVALUATION AS
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO­
LOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL
or ISO’s member body in the country of the requester.
TO BECOME STAN DARDS TO WHICH REFERENCE MAY BE
MADE IN NATIONAL REGULATIONS.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland Reference number
ISO/FDIS 5942:2024(en) © ISO 2024

ii
ISO/FDIS 5942:2024(en)
Contents Page
Foreword .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Classification . 2
5 Technical requirements . 2
5.1 Specifications .2
5.1.1 Size and tolerance .2
5.1.2 Diagonal difference .2
5.1.3 Edge straightness .2
5.1.4 Degree of warping .2
5.2 Appearance quality .2
5.3 Physical and mechanical properties .6
5.4 Floor strength .6
5.5 Anti-insect and antiseptic treatments . .6
6 Inspection methods . 7
6.1 Size specification .7
6.2 Diagonal difference.7
6.3 Edge straightness .7
6.4 Degree of warping .7
6.5 Appearance quality .7
6.6 Physical and mechanical properties .7
6.6.1 Specimen preparation .7
6.6.2 Standard conditioning .8
6.6.3 Density .8
6.6.4 Moisture content .8
6.6.5 Bond durability .8
6.6.6 Short span bending force .9
6.6.7 Concentrated load .9
6.6.8 Floor strength .10
7 Inspection rules . 10
7.1 Inspection category.10
7.1.1 General .10
7.1.2 Delivery inspection .10
7.1.3 Type inspection .10
7.1.4 Floor strength inspection .11
7.2 Group principle . .11
7.3 Sampling methods .11
7.3.1 General .11
7.3.2 Appearance quality inspection .11
7.3.3 Specifications inspection .11
7.3.4 Physical and mechanical properties inspection . 12
7.4 Comprehensive judgement . 12
7.4.1 Determination of test results . 12
7.4.2 Comprehensive judgement . 12
8 Marking, packaging, transportation and storage .13
8.1 Marking . 13
8.1.1 Product marking. 13
8.1.2 Packaging label . 13
8.2 Packaging . 13
8.3 Transportation and storage . 13
Annex A (informative) Details for reference of the simulated freight container base underframe . 14

iii
ISO/FDIS 5942:2024(en)
Bibliography . 17

iv
ISO/FDIS 5942:2024(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO document should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent
rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a)
patent(s) which may be required to implement this document. However, implementers are cautioned that
this may not represent the latest information, which may be obtained from the patent database available at
www.iso.org/patents. ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenienc
...

ISO/FDIS 5942:2023(E)
ISO/TC 296/WG 2
Date: 2024-02-18
Secretariat: SAC
Date: 2024-04-15
Bamboo-wood composite for container flooring
FDIS stage
ISO/FDIS 5942:2024(en)
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication
may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying,
or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO
at the address below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: + 41 22 749 01 11
E-mail: [e-mail]
Website: www.iso.org
Published in Switzerland
ii
ISO/FDIS 5942:2024(en)
Contents
Foreword . v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Classification. 2
5 Technical requirements . 2
5.1 Specifications . 2
5.1.1 Size and tolerance . 2
5.1.2 Diagonal difference . 2
5.1.3 Edge straightness . 2
5.1.4 Degree of warping . 2
5.2 Appearance quality . 3
5.3 Physical and mechanical properties . 6
5.4 Floor strength . 7
5.5 Anti-insect and antiseptic treatments . 7
6 Inspection methods . 7
6.1 Size specification . 7
6.2 Diagonal difference . 7
6.3 Edge straightness . 7
6.4 Degree of warping . 7
6.5 Appearance quality . 8
6.6 Physical and mechanical properties . 8
6.6.1 Specimen preparation . 8
6.6.2 Standard conditioning . 9
6.6.3 Density . 10
6.6.4 Moisture content . 10
6.6.5 Bond durability . 10
6.6.6 Short span bending force . 10
6.6.7 Concentrated load. 10
6.6.8 Floor strength . 12
7 Inspection rules . 12
7.1 Inspection category . 12
7.1.1 General. 12
7.1.2 Delivery inspection . 13
7.1.3 Type inspection . 13
7.1.4 Floor strength inspection . 13
7.2 Group principle. 13
7.3 Sampling methods . 13
7.3.1 General. 13
7.3.2 Appearance quality inspection . 13
7.3.3 Specifications inspection . 14
7.3.4 Physical and mechanical properties inspection . 14
7.4 Comprehensive judgement . 15
7.4.1 Determination of test results . 15
7.4.2 Comprehensive judgement . 15
8 Marking, packaging, transportation and storage . 15
8.1 Marking . 15
8.1.1 Product marking . 15
iii
ISO/FDIS 5942:2024(en)
8.1.2 Packaging label . 15
8.2 Packaging . 15
8.3 Transportation and storage . 15
Annex A (informative) Details for reference of the simulated freight container base underframe16
Bibliography . 21

iv
ISO/FDIS 5942:2024(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types of
ISO document should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent rights
in respect thereof. As of the date of publication of this document, ISO had not received notice of (a) patent(s)
which may be required to implement this document. However, implementers are cautioned that this may not
represent the latest information, which may be obtained from the patent database available at
www.iso.org/patents. ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO’s adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 296, Bamboo and rattan.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
v
Bamboo-wood composite for container flooring
1 Scope
This document specifies the classification, technical requirements, inspection methods, inspection rules,
marking, packaging, transportation and storage of bamboo-wood composite for container flooring.
This document is for applicable to the types of freight containers specified in the ISO 1496-1:2013, where
applicable.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes
requirements of this document. For dated references, only the edition cited applies. For undated references,
the latest edition of the referenced document (including any amendments) applies.
ISO 668:2020, Series 1 freight containers — Classification, dimensions and ratings
ISO 1496-1:2013, Series 1 freight containers — Specification and testing — Part 1: General cargo containers for
general purposes
ISO 2074, Plywood — Vocabulary
ISO 2859-1, Sampling procedures for inspection by attributes — Part 1: Sampling schemes indexed by acceptance
quality limit (AQL) for lot-by-lot inspection
ISO 9426:2003, Wood-based panels — Determination of dimensions of panels
ISO 9427, Wood-based panels — Determination of density
ISO 16979, Wood-based panels — Determination of moisture content
ISO 21625:2020, Terminology of bamboo products
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 2074, ISO 21625:2020 and ISO 2074
and the following apply.
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https://www.iso.org/obp
— IEC Electropedia: available at https://www.electropedia.org/
3.1
bamboo-wood composite for container flooring
bamboo-wood composite made from bamboo and a wood element by gluing, hot pressing, used for container
flooring
Note 1 to entry: A largerlarge range of raw materials for making bamboo-wood composite is included. BambooThe
bamboo element is processed using a mechanical method with bamboo as the raw material, such as (e.g. bamboo
interlaced mat, bamboo curtain, flattened bamboo board, bamboo fibre bundle sheet and bamboo strand. ). “Wood
element” refers to a sheet-like material processed from wood, for example, (e.g. wood veneer and, wood strand.).

ISO/FDIS 5942:2024(en)
[SOURCE: ISO 21625:2020, 3.3.4.9, modified — The word "“for” added in the term. “bamboo and wood
element” replaced “wood veneer and bamboo curtain" has been replaced by “bamboo and wood element” in
the term;” in the definition has been modified;. Note 1 t
...