iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ISO

ISO/TS 18614:2016

(Main)

Packaging — Label material — Required information for ordering and specifying self-adhesive labels

Packaging — Label material — Required information for ordering and specifying self-adhesive labels

ISO/TS 18614:2016 provides guidelines for users and suppliers providing the required information for requesting and specifying self-adhesive labels. It provides what to consider when defining and specifying label materials to be used for a given application. It will ensure that the relevant information is provided so that the right material for the intended application can be requested or recommended, as well as ensure that label parameters and characteristics are specified in a similar format to permit label materials to be requested, specified and compared in a consistent manner. It applies to labels with adhesive (also named as self-adhesive or pressure-sensitive). How to work and specify with other types of labels and marking are not addressed in ISO/TS 18614:2016, but may be the topic of subsequent documents. Also excluded is the information related to regulatory compliance.

Emballage — Matériau d'étiquetage — Informations exigées pour la commande et la spécification des étiquettes autocollantes

General Information

Status
Published
Publication Date
19-Jun-2016
ICS
55.020 - Packaging and distribution of goods in general
Technical Committee
ISO/TC 122 - Packaging
Drafting Committee
ISO/TC 122 - Packaging
Current Stage
9060 - Close of review
Start Date
04-Jun-2027
Ref Project

Relations

Consolidated By
ISO 14184-3:2023 - Textiles — Determination of formaldehyde — Part 3: Free and hydrolysed formaldehyde (extraction method) by liquid chromatography
Effective Date
06-Jun-2022

Buy Standard

ISO/TS 18614:2016 - Packaging -- Label material -- Required information for ordering and specifying self-adhesive labelsISO/TS 18614:2016 - Packaging -- Label material -- Required information for ordering and specifying self-adhesive labels
PreviousNext
Technical specification
ISO/TS 18614:2016 - Packaging -- Label material -- Required information for ordering and specifying self-adhesive labels
English language
36 pages
sale 15% off
Preview
sale 15% off
Preview
ISO/TS 18614:2016 - Packaging -- Label material -- Required information for ordering and specifying self-adhesive labelsISO/TS 18614:2016 - Packaging -- Label material -- Required information for ordering and specifying self-adhesive labels
PreviousNext
Technical specification
ISO/TS 18614:2016 - Packaging -- Label material -- Required information for ordering and specifying self-adhesive labels
English language
36 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

TECHNICAL ISO/TS
SPECIFICATION 18614
First edition
Packaging — Label material —
Required information for ordering
and specifying self-adhesive labels
Emballage — Matériau d’étiquetage — Informations exigées pour la
commande et la spécification des étiquettes autocollantes
PROOF/ÉPREUVE
Reference number
ISO/TS 18614:2016(E)
©
ISO 2016

---------------------- Page: 1 ----------------------
ISO/TS 18614:2016(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2016, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2016 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/TS 18614:2016(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Abbreviated terms . 4
5 Requirements . 5
5.1 General . 5
5.2 Specification checklists for self-adhesive labels (end-user created). 5
5.3 Label material specification form (supplier response). 5
6 Considerations . 5
6.1 Order request of label material. 5
6.2 Specifying of label material . 5
Annex A (normative) Checklists for specification of characteristics for self-adhesive labels .7
Annex B (informative) Considerations per application .11
Annex C (normative) Label material specification .13
Annex D (informative) Different identification methods and purposes .18
Annex E (informative) Different identification methods and purposes .20
Annex F (informative) Label components .22
Annex G (informative) Content in label material specification .25
Annex H (informative) Label material measurements .
...

TECHNICAL ISO/TS
SPECIFICATION 18614
First edition
2016-06-15
Packaging — Label material —
Required information for ordering
and specifying self-adhesive labels
Emballage — Matériau d’étiquetage — Informations exigées pour la
commande et la spécification des étiquettes autocollantes
Reference number
ISO/TS 18614:2016(E)
©
ISO 2016

---------------------- Page: 1 ----------------------
ISO/TS 18614:2016(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2016, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2016 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/TS 18614:2016(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Abbreviated terms . 4
5 Requirements . 5
5.1 General . 5
5.2 Specification checklists for self-adhesive labels (end-user created). 5
5.3 Label material specification form (supplier response). 5
6 Considerations . 5
6.1 Order request of label material. 5
6.2 Specifying of label material . 5
Annex A (normative) Checklists for specification of characteristics for self-adhesive labels .7
Annex B (informative) Considerations per application .11
Annex C (normative) Label material specification .13
Annex D (informative) Different identification methods and purposes .18
Annex E (informative) Different identification methods and purposes .20
Annex F (informative) Label components .22
Annex G (informative) Content in label material specification .25
Annex H (informative) Label material measurements .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ISO
ISO 23416:2023(Main)
General specifications and testing methods for temperature-sensitive medicinal packages in good distribution practice principles

This document describes the general specifications of temperature-sensitive medicinal packaging based on the principles of good distribution practice (GDP). It also specifies test methods to validate the package performance for temperature-sensitive medicinal products. This covers the procedures of temperature-recording and testing methods on the performance of insulated containers such as dimensions, weights, storage capacity and robustness in temperature-controlling. This document does not guarantee the quality and safety of all medicinal products. Under special circumstances where the weight or the characteristics of the products and environment show specific conditions, agreements are followed. This document does not cover the active packaging system, but only covers the passive packaging system able to control the desired temperature without any power sources.

  • Standard
    16 pages
    English language
    sale 15% off
ISO
ISO/TS 22984:2021(Main)
Transport packaging — Cleaning and sanitation methods of reusable transport items for distribution purpose

This document provides guidelines for the cleaning and sanitation procedures for the sanitary operation of reusable transport packaging, which are used in the fields of handling, transport, storage and display of food and non-food products. It is applicable to all reusable transport items including reusable rigid plastic distribution boxes defined in ISO 18616-1.

  • Technical specification
    7 pages
    English language
    sale 15% off
ISO
ISO 22982-2:2021(Main)
Transport Packaging — Temperature controlled transport packages for parcel shipping — Part 2: General specifications of testing

This document specifies the test methods of temperature-controlled packages for parcel shipping. Tests include physical, thermal conductivity and insulation performances of transport packages that use insulation for the purpose of blocking thermal conduction between the inside and the outside of a product package that need temperature control.

  • Standard
    9 pages
    English language
    sale 15% off
  • Draft
    9 pages
    English language
    sale 15% off
ISO
ISO 22982-1:2021(Main)
Transport packaging — Temperature-controlled transport packages for parcel shipping — Part 1: General requirements

This document specifies the general requirements of transport packaging, especially the containers, which are formed or prepared for the temperature-controlled transport services of parcel shipping. Safety or sanitation is not covered in this document. This document set outs the general requirements for transport packaging for safe storage and distribution of temperature-sensitive products.

  • Standard
    10 pages
    English language
    sale 15% off
  • Draft
    10 pages
    English language
    sale 15% off
ISO
ISO 22015:2019(Main)
Packaging — Accessible design — Handling and manipulation

This document provides requirements and recommendations in designing consumer packages, independent of material, to increase accessibility with regard to handling and manipulation. The document considers packaging needs from a wide range of users with diverse human abilities and needs in diverse contexts of use. Handling and manipulation include human physical abilities like holding, lifting, carrying, pulling, pushing, sliding, grasping, twisting, tearing and any combination of those actions related to portability, opening, re-closing and taking out contents of packages as well as to storage and disposal. Requirements and recommendations with regard to those abilities are provided for people with special needs including older people and people with disabilities in their handling and manipulation of packages. This document focuses on physical handling and manipulation which necessarily includes the processes of opening and closing specifically detailed in ISO 17480. It applies to reclosable and non-reclosable consumer packaging without using any other mechanical means. This document is primarily for designers, developers and evaluators of packaging and is also useful for other disciplines. Handling and manipulation for transportation of packaging is not covered in this standard. It does not apply to products regulated for safety or other reasons (e.g. toxic or dangerous goods and substances, medicinal products, and medical devices).

  • Standard
    26 pages
    English language
    sale 15% off
ISO
ISO 21976:2018(Main)
Packaging — Tamper verification features for medicinal product packaging

This document specifies requirements and provides guidance for the application, use and check of tamper verification features to the packaging of medicinal products.

  • Standard
    16 pages
    English language
    sale 15% off
  • Standard
    17 pages
    French language
    sale 15% off
ISO
ISO 19809:2017(Main)
Packaging — Accessible design — Information and marking

ISO 19809:2017 provides requirements and recommendations concerning accessible design of consumer packaging with regard to information and marking. This document specifies considerations and methods for designing and presenting information and marking to make consumer packages accessible to people with the widest range of capabilities by considering their sensory and cognitive abilities. This document applies to all types of information and marking presented on consumer packaging. Specifically excluded from this document are information and marking for medicinal products and medical devices including tamper verification. The design considerations and methods specified in this document are primarily intended for designers, developers and evaluators of packaging.

  • Standard
    18 pages
    English language
    sale 15% off
ISO
ISO 15394:2017(Main)
Packaging — Bar code and two-dimensional symbols for shipping, transport and receiving labels

ISO 15394:2017: - specifies the minimum requirements for the design of labels containing linear bar code and two-dimensional symbols on transport units to convey data between trading partners; - provides for traceability of transported units using a unique transport unit identifier (licence plate); - provides guidance on the formatting on the label of data presented in linear bar code, two-dimensional symbol or human-readable form; - provides specific recommendations regarding the choice of bar code symbologies, and specifies quality requirements; - provides recommendations as to label placement, size and the inclusion of free text and any appropriate graphics; - provides guidance on the selection of the label material. This document is not applicable to the direct printing on to kraft coloured corrugated surfaces. NOTE Guidance on the direct printing of bar code symbols on to kraft coloured corrugated surfaces are provided in references such as The Fibre Box Handbook[10].

  • Standard
    68 pages
    English language
    sale 15% off
ISO
ISO 28219:2017(Main)
Packaging — Labelling and direct product marking with linear bar code and two-dimensional symbols

ISO 28219:2017 - defines minimum requirements for identifying items, - provides guidelines for item marking with machine-readable symbols, - covers both labels and direct marking of items, - includes testing procedures for label adhesive characteristics and mark durability, - provides guidance for the formatting on the label of data presented in linear bar code, two-dimensional symbol or human-readable form, - is intended for applications which include, but are not limited to, support of systems that automate the control of items during the processes of: - production, - inventory, - distribution, - field service, - point of sale, - point of care, - repair, and - is intended to include, but it is not limited to, multiple industries including: - automotive, - aerospace, - chemical, - consumer items, - electronics, - health care, - marine, - rail, - telecommunications. The location and application method of the marking are not defined (these will be reviewed and agreed upon by suppliers and manufacturers and their trading partners before implementing ISO 28219:2017). ISO 28219:2017 does not supersede or replace any applicable safety or regulatory marking or labelling requirements. ISO 28219:2017 is meant to satisfy the minimum item marking requirements of numerous applications and industry groups and as such its applicability is to a wide range of industries, each of which may have specific implementation guidelines for it. ISO 28219:2017 is to be applied in addition to any other mandated labelling direct-marking requirements. The labelling and direct marking requirement of ISO 28219:2017 and other standards can be combined into one label or marking area or appear as separate labels or marking areas. ISO 28219:2017 uses the terms "part marking" and "item marking" interchangeably. Unless otherwise stated, ISO 28219:2017 will use the term "item marking" to describe both the labelling and direct part marking (DPM) of an item, where DPM includes, but is not limited to, altering (e.g. dot peen, laser etch, chemical etch), as well as additive type processes (e.g. ink jet, vacuum deposition). The purpose of ISO 28219:2017 is to establish the machine-readable (linear, two-dimensional, and composite symbols) and human-readable content for direct marking and labelling of items, parts, and components. ISO 28219:2017 provides a means for items, parts and components to be marked, and read in either fixtured or hand-held scanning environments at any manufacturer's facility and then read by customers purchasing items for subsequent manufacturing operations or for final end use. Intended applications include, but are not limited to, supply chain applications, e.g. inventory, distribution, manufacturing, quality control, acquisition, transportation, supply, repair, and disposal. The figures are illustrative and not necessarily to scale or to the quality requirements specified in ISO 28219:2017.

  • Standard
    55 pages
    English language
    sale 15% off
ISO
ISO/TS 17451-2:2017(Main)
Packaging — Codification of contents for inventories for shipments of household goods and personal effects — Part 2: XML messaging structure for electronic transmission of inventory data

ISO/TS 17451-2:2017 specifies a common XML structure for the transmission of inventory information for shipments of household goods and personal effects between moving companies and their external partners. The Inventory XSD defined in Clause 5 specifies the XML structure to be used. Each XML document corresponds to one shipment carried by land, sea or air.

  • Technical specification
    26 pages
    English language
    sale 15% off