ISO 6743-9:2003

Lubricants, industrial oils and related products (class L) — Classification — Part 9: Family X (Greases)

ISO 6743-9:2003 establishes a detailed classification of family X (Greases) which belongs to class L (Lubricants, industrial oils and related products). It should be read in conjunction with ISO 6743-99. This classification applies to categories of greases used for lubrication of equipment, components of machines, vehicles, etc.

Lubrifiants, huiles industrielles et produits connexes (classe L) — Classification — Partie 9: Famille X (Graisses)

L'ISO 6743-9:2003 établit la classification détaillée de la famille X (graisses) qui appartient à la classe L (Lubrifiants, huiles industrielles et produits connexes). Elle doit être lue conjointement avec l'ISO 6743-99. Cette classification s'applique aux graisses utilisées pour la lubrification des matériels, des organes de machines, des véhicules, etc.

Maziva, industrijska olja in sorodni proizvodi (skupina L) – Klasifikacija – 9. del: Podskupina X (masti)

General Information

• Status: Published
• Publication Date: 09-Apr-2003
• ICS: 75.100 - Lubricants, industrial oils and related products
• Technical Committee: ISO/TC 28/SC 4 - Classifications and specifications
• Drafting Committee: ISO/TC 28/SC 4 - Classifications and specifications
• Current Stage: 9093 - International Standard confirmed
• Completion Date: 15-Jul-2019
• Ref Project: SIST ISO 6743-9:2006 - Lubricants, industrial oils and related products (class L) -- Classification -- Part 9: Family X (Greases)

Relations

• Revises: ISO 6743-9:1987 - Lubricants, industrial oils and related products (class L) — Classification — Part 9: Family X (Greases)
• Effective Date: 15-Apr-2008

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 6743-9
Second edition
2003-04-01
Lubricants, industrial oils and related
products (class L) — Classification —
Part 9:
Family X (Greases)
Lubrifiants, huiles industrielles et produits connexes (classe L) —
Classification —
Partie 9: Famille X (Graisses)

Reference number
ISO 6743-9:2003(E)
© ISO 2003

---------------------- Page: 1 ----------------------
ISO 6743-9:2003(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be
edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file,
parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters
were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event
that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2003
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's
member body in the country of the requester.
ISO copyright office
Case postale 56  CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Printed in Switzerland
©
ii ISO 2003 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 6743-9:2003(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO
member bodies). The work of preparing International Standards is normally carried out through ISO technical
committees. Each member body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, governmental and non-governmental, in
liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this part of ISO 6743 may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
International Standard ISO 6743-9 was prepared by Technical Committee ISO/TC 28, Petroleum products and
lubricants, Subcommittee SC 4, Classifications and specifications.
This second edition cancels and replaces the first edition (ISO 6743-9:1987), which has been technically revised.
ISO 6743 consists of the following parts, under the general title Lubricants, industrial oils and related products (class
L) — Classification:
— Part 1: Family A (Total loss systems)
— Part 2: Family F (Spindle bearings, bearings and associated clutches)
— Part 3: Family D (Compressors)
— Part 4: Family H (Hydraulic systems)
— Part 5: Family T (Turbines)
— Part 6: Family C (Gears)
— Part 7: Family M (Metalworking)
— Part 8: Family R (Temporary protection against corrosion)
— Part 9: Family X (Greases)
— Part 10: Family Y (Miscellaneous)
— Part 11: Family P (Pneumatic tools)
— Part 12: Family Q (Heat transfer fluids)
— Part 13: Family G (Slideways)
— Part 14: Family U (Heat treatment)
— Part 15: Family E (Internal combustion engine oils)
— Part 3A: Family D (Compressors)
— Part 3B: Family D (Gas and refrigeration compressors)
— Part 99: General
Annex A of this part of ISO 6743 is for information only.
©
ISO 2003 – All rights reserved iii

---------------------- Page: 3 ----------------------
INTERNATIONAL STANDARD ISO 6743-9:2003(E)
Lubricants, industrial oils and related products (class L) —
Classification —
Part 9:
Family X (Greases)
1 Scope
This part of ISO 6743 establishes a detailed classification of family X (Greases) which belongs to class L (Lubricants,
industrial oils and related products).
[1]
It should be read in conjunction with ISO 6743-99 .
This classification applies to categories of greases used for lubrication of equipment, components of machines,
vehicles, etc.
The greases have been classified according to the operating conditions under which they are used, because the
versatile nature of grease makes it impractical to classify them according to the end use. It will therefore be
necessary to consult the supplier to be certain that the grease can be used in, for example, rolling bearings or
pumped supply systems, and also concerning the compatibility of products.
In this classification, a grease cannot have more than one symbol. This symbol should correspond to the most
severe conditions of temperature, water contamination and load in which the grease can be used.
NOTE This part of ISO 6743 does not pretend to cover the classification of greases intended for very special applications. It is up
to the end-user and the supplier to negotiate the applicability of such greases, on the basis of relevant laboratory and/or field
testing.
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of
this part of ISO 6743. For dated references, subsequent amendments to, or revisions of, any of these publications do
not apply. However, parties to agreements based on this part of ISO 6743 are encouraged to investigate the
possibility of applying the most recent editions of the normative documents indicated below. For undated references,
the latest edition of the normative document referred to applies. Members of ISO and IEC maintain registers of
currently valid International Standards.
ISO 2137:1985, Petroleum products — Lubricating grease and petrolatum — Determination of cone penetration
ISO 8681:1986, Petroleum products and lubricants — Method of classification — Definition of classes
3 Explanation of symbols used
3.1 The detailed classification of family X is based on the conditions of grease use.
3.2 In accordance with ISO 8681, the complete designation of the grease includes:
— the initials ISO;
— the letter L for the class “lubricants, industrial oils and related products”;
©
ISO 2003 – All rights reserved 1

---------------------- Page: 4 ----------------------
ISO 6743-9:2003(E)
— the category of the grease constituted by a group of five letters where each letter and the order in which it is
written has a particular significance:
— the letter X for the family grease,
— the lower operating temperature (symbol 1),
— the upper operating temperature (symbol 2),
— the ability of the grease to provide satisfactory lubrication in water contamination conditions, and to
provide the level of anti-rust protection (symbol 3),
— the ability of the grease to lubricate in the presence of high loads (symbol 4);
1)
— the NLGI consistency number of the grease corresponding to the measured penetration level according to
ISO 2137.
3.3 In this classification system, products are designated in a uniform manner, each letter having a
significance of its own. It is th
...

SLOVENSKI STANDARD
SIST ISO 6743-9:2006
01-september-2006
Maziva, industrijska olja in sorodni proizvodi (skupina L) – Klasifikacija – 9. del:
Podskupina X (masti)
Lubricants, industrial oils and related products (class L) -- Classification -- Part 9: Family
X (Greases)
Lubrifiants, huiles industrielles et produits connexes (classe L) -- Classification -- Partie
9: Famille X (Graisses)
Ta slovenski standard je istoveten z: ISO 6743-9:2003
ICS:
75.100 Maziva Lubricants, industrial oils and
related products
SIST ISO 6743-9:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ISO 6743-9:2006

---------------------- Page: 2 ----------------------

SIST ISO 6743-9:2006
INTERNATIONAL ISO
STANDARD 6743-9
Second edition
2003-04-01
Lubricants, industrial oils and related
products (class L) — Classification —
Part 9:
Family X (Greases)
Lubrifiants, huiles industrielles et produits connexes (classe L) —
Classification —
Partie 9: Famille X (Graisses)

Reference number
ISO 6743-9:2003(E)
© ISO 2003

---------------------- Page: 3 ----------------------

SIST ISO 6743-9:2006
ISO 6743-9:2003(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be
edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file,
parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters
were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event
that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2003
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's
member body in the country of the requester.
ISO copyright office
Case postale 56  CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Printed in Switzerland
©
ii ISO 2003 – All rights reserved

---------------------- Page: 4 ----------------------

SIST ISO 6743-9:2006
ISO 6743-9:2003(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO
member bodies). The work of preparing International Standards is normally carried out through ISO technical
committees. Each member body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, governmental and non-governmental, in
liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this part of ISO 6743 may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
International Standard ISO 6743-9 was prepared by Technical Committee ISO/TC 28, Petroleum products and
lubricants, Subcommittee SC 4, Classifications and specifications.
This second edition cancels and replaces the first edition (ISO 6743-9:1987), which has been technically revised.
ISO 6743 consists of the following parts, under the general title Lubricants, industrial oils and related products (class
L) — Classification:
— Part 1: Family A (Total loss systems)
— Part 2: Family F (Spindle bearings, bearings and associated clutches)
— Part 3: Family D (Compressors)
— Part 4: Family H (Hydraulic systems)
— Part 5: Family T (Turbines)
— Part 6: Family C (Gears)
— Part 7: Family M (Metalworking)
— Part 8: Family R (Temporary protection against corrosion)
— Part 9: Family X (Greases)
— Part 10: Family Y (Miscellaneous)
— Part 11: Family P (Pneumatic tools)
— Part 12: Family Q (Heat transfer fluids)
— Part 13: Family G (Slideways)
— Part 14: Family U (Heat treatment)
— Part 15: Family E (Internal combustion engine oils)
— Part 3A: Family D (Compressors)
— Part 3B: Family D (Gas and refrigeration compressors)
— Part 99: General
Annex A of this part of ISO 6743 is for information only.
©
ISO 2003 – All rights reserved iii

---------------------- Page: 5 ----------------------

SIST ISO 6743-9:2006
INTERNATIONAL STANDARD ISO 6743-9:2003(E)
Lubricants, industrial oils and related products (class L) —
Classification —
Part 9:
Family X (Greases)
1 Scope
This part of ISO 6743 establishes a detailed classification of family X (Greases) which belongs to class L (Lubricants,
industrial oils and related products).
[1]
It should be read in conjunction with ISO 6743-99 .
This classification applies to categories of greases used for lubrication of equipment, components of machines,
vehicles, etc.
The greases have been classified according to the operating conditions under which they are used, because the
versatile nature of grease makes it impractical to classify them according to the end use. It will therefore be
necessary to consult the supplier to be certain that the grease can be used in, for example, rolling bearings or
pumped supply systems, and also concerning the compatibility of products.
In this classification, a grease cannot have more than one symbol. This symbol should correspond to the most
severe conditions of temperature, water contamination and load in which the grease can be used.
NOTE This part of ISO 6743 does not pretend to cover the classification of greases intended for very special applications. It is up
to the end-user and the supplier to negotiate the applicability of such greases, on the basis of relevant laboratory and/or field
testing.
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of
this part of ISO 6743. For dated references, subsequent amendments to, or revisions of, any of these publications do
not apply. However, parties to agreements based on this part of ISO 6743 are encouraged to investigate the
possibility of applying the most recent editions of the normative documents indicated below. For undated references,
the latest edition of the normative document referred to applies. Members of ISO and IEC maintain registers of
currently valid International Standards.
ISO 2137:1985, Petroleum products — Lubricating grease and petrolatum — Determination of cone penetration
ISO 8681:1986, Petroleum products and lubricants — Method of classification — Definition of classes
3 Explanation of symbols used
3.1 The detailed classification of family X is based on the conditions of grease use.
3.2 In accordance with ISO 8681, the complete designation of the grease includes:
— the initials ISO;
— the letter L for the class “lubricants, industrial oils and related products”;
©
ISO 2003 – All rights reserved 1

---------------------- Page: 6 ----------------------

SIST ISO 6743-9:2006
ISO 6743-9:2003(E)
— the category of the grease constituted by a group of five letters where each letter and the order in which it is
written has a particular significance:
— the letter X for the family grease,
— the lower operating temperature (symbol 1),
— the upper operating temperature (symbol 2),
— the ability of the grease to provide satisfactory lubrication in water contamination conditions, and to
provide t
...

NORME ISO
INTERNATIONALE 6743-9
Deuxième édition
2003-04-01
Lubrifiants, huiles industrielles et produits
connexes (classe L) — Classification —
Partie 9:
Famille X (Graisses)
Lubricants, industrial oils and related products (class L) — Classification —
Part 9: Family X (Greases)

Numéro de référence
ISO 6743-9:2003(F)
© ISO 2003

---------------------- Page: 1 ----------------------
ISO 6743-9:2003(F)
PDF — Exonération de responsabilité
Le présent fichier PDF peut contenir des polices de caractères intégrées. Conformément aux conditions de licence d'Adobe, ce fichier peut
être imprimé ou visualisé, mais ne doit pas être modifié à moins que l'ordinateur employé à cet effet ne bénéficie d'une licence autorisant
l'utilisation de ces polices et que celles-ci y soient installées. Lors du téléchargement de ce fichier, les parties concernées acceptent de fait la
responsabilité de ne pas enfreindre les conditions de licence d'Adobe. Le Secrétariat central de l'ISO décline toute responsabilité en la
matière.
Adobe est une marque déposée d'Adobe Systems Incorporated.
Les détails relatifs aux produits logiciels utilisés pour la création du présent fichier PDF sont disponibles dans la rubrique General Info du
fichier; les paramètres de création PDF ont été optimisés pour l'impression. Toutes les mesures ont été prises pour garantir l'exploitation de
ce fichier par les comités membres de l'ISO. Dans le cas peu probable où surviendrait un problème d'utilisation, veuillez en informer le
Secrétariat central à l'adresse donnée ci-dessous.
© ISO 2003
Droits de reproduction réservés. Sauf prescription différente, aucune partie de cette publication ne peut être reproduite ni utilisée sous
quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l'accord écrit de
l'ISO à l'adresse ci-après ou au comité membre de l'ISO dans le pays du demandeur.
ISO copyright office
Case postale 56  CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Imprimé en Suisse
©
ii ISO 2003 – Tous droits réservés

---------------------- Page: 2 ----------------------
ISO 6743-9:2003(F)
Avant-propos
L'ISO (Organisation internationale de normalisation) est une fédération mondiale d'organismes nationaux de
normalisation (comités membres de l'ISO). L'élaboration des Normes internationales est en général confiée aux
comités techniques de l'ISO. Chaque comité membre intéressé par une étude a le droit de faire partie du comité
technique créé à cet effet. Les organisations internationales, gouvernementales et non gouvernementales, en liaison
avec l'ISO participent également aux travaux. L'ISO collabore étroitement avec la Commission électrotechnique
internationale (CEI) en ce qui concerne la normalisation électrotechnique.
Les Normes internationales sont rédigées conformément aux règles données dans les Directives ISO/CEI, Partie 3.
Les projets de Normes internationales adoptés par les comités techniques sont soumis aux comités membres pour
vote. Leur publication comme Normes internationales requiert l'approbation de 75 % au moins des comités membres
votants.
L'attention est appelée sur le fait que certains des éléments de la présente partie de l'ISO 6743 peuvent faire l'objet
de droits de propriété intellectuelle ou de droits analogues. L'ISO ne saurait être tenue pour responsable de ne pas
avoir identifié de tels droits de propriété et averti de leur existence.
La Norme internationale ISO 6743-9 a été élaborée par le comité technique ISO/TC 28, Produits pétroliers et
lubrifiants, sous-comité SC 4, Classifications et spécifications.
Cette deuxième édition annule et remplace la première édition (ISO 6743-9:1987), dont elle constitue une révision
technique.
L'ISO 6743 comprend les parties suivantes, présentées sous le titre général Lubrifiants, huiles industrielles et
produits connexes (classe L) — Classification:
— Partie 1: Famille A (Graissage perdu)
— Partie 2: Famille F (Paliers de broche, paliers et embrayages associés)
— Partie 3: Famille D (Compresseurs)
— Partie 4: Famille H (Systèmes hydrauliques)
— Partie 5: Famille T (Turbines)
— Partie 6: Famille C (Engrenages)
— Partie 7: Famille M (Travail des métaux)
— Partie 8: Famille R (Protection temporaire contre la corrosion)
— Partie 9: Famille X (Graisses)
— Partie 10: Famille Y (Autres applications)
— Partie 11: Famille P (Outils pneumatiques)
— Partie 12: Famille Q (Fluides de transfert de chaleur)
— Partie 13: Famille G (Glissières)
— Partie 14: Famille U (Traitement thermique)
— Partie 15: Famille E (Huiles pour moteurs à combustion interne)
— Partie 3A: Famille D (Compresseurs)
— Partie 3B: Famille D (Compresseurs de gaz et frigorifiques)
— Partie 99: Généralités
©
ISO 2003 – Tous droits réservés iii

---------------------- Page: 3 ----------------------
ISO 6743-9:2003(F)
L'annexe A de la présente partie de l'ISO 6743 est donnée uniquement à titre d'information.
©
iv ISO 2003 – Tous droits réservés

---------------------- Page: 4 ----------------------
NORME INTERNATIONALE ISO 6743-9:2003(F)
Lubrifiants, huiles industrielles et produits connexes (classe L) —
Classification —
Partie 9:
Famille X (Graisses)
1 Domaine d'application
La présente partie de l'ISO 6743 établit la classification détaillée de la famille X (graisses) qui appartient à la classe L
(Lubrifiants, huiles industrielles et produits connexes).
[1]
Elle doit être lue conjointement avec l'ISO 6743-99 .
Cette classification s'applique aux graisses utilisées pour la lubrification des matériels, des organes de machines,
des véhicules, etc.
La classification des graisses a été faite suivant leurs conditions opératoires d'utilisation car, compte tenu des
propriétés diverses des graisses, il n'était pas possible de les classer suivant leur utilisation finale. Aussi sera-t-il
nécessaire de consulter le fournisseur pour s'assurer que la graisse peut être utilisée, par exemple, dans des
roulements ou dans des systèmes de distribution par pompe, ou bien pour des questions éventuelles concernant la
compatibilité des produits.
Dans ce système, une même graisse ne peut avoir plus d'un symbole ISO. Il convient que le symbole à retenir
corresponde aux conditions les plus sévères de température, de charge et de contamination par l'eau pour
lesquelles la graisse peut être utilisée.
NOTE La présente partie de l'ISO 6743 ne prétend pas couvrir la classification des graisses destinées à des applications très
spécifiques. Il est du ressort de l'utilisateur final et du fournisseur de convenir de l'application de telles graisses, en se référant aux
essais de laboratoire ou de terrain appropriés.
2Références normatives
Les documents normatifs suivants contiennent des dispositions qui, par suite de la référence qui y est faite,
constituent des dispositions valables pour la présente partie de l'ISO6743. Pour les références datées, les
amendements ultérieurs ou les révisions de ces publications ne s'appliquent pas. Toutefois, les parties prenantes
aux accords fondés sur la présente partie de l'ISO 6743 sont invitées à rechercher la possibilité d'appliquer les
éditions les plus récentes des documents normatifs indiqués ci-après. Pour les références non datées, la dernière
édition du document normatif en référence s'applique. Les membres de l'ISO et de la CEI possèdent le registre des
Normes internationales en vigueur.
ISO 2137:1985, Produits pétroliers — Graisse lubrifiante et pétrolatum — Détermination de la pénétrabilité au cône
ISO 8681:1986, Produits pétroliers et lubrifiants — Système de classification — Définition des classes de produits
3 Explication des symboles utilisés
3.1 Le principe de la classification détaillée de la famille X repose sur les conditions d'utilisation des graisses.
©
ISO 2003 – Tous droits réservés 1

---------------------- Page: 5 ----------------------
ISO 6743-9:2003(F)
3.2 Conformément à l'ISO 8681, la désignation complète d'une graisse comprend
— le sigle ISO;
— la lettre L qui identifie la classe des «lubrifiants, des huiles industrielles et des produits connexes»;
— la catégorie de graisse constituée d'un groupe de cinq lettres, où chacune, ainsi que l'ordre dans lequel elle
apparaît, a une signification propre:
— la lettre X pour la famille «graisses»,
— la température minimale d'utilisation de la graisse (symbole 1),
— la température maximale d'utilisation de la graisse (symbole 2),
— l'aptitude de la graisse à assurer une lubrification satisfaisante en présence d'eau et à fournir un niveau de
protection antirouille (symbole 3),
— l'aptitude de la graisse à assurer une lubrification d'organes fonctionnant sous charges élevées (symbole 4);
1)
— le nombre NLGI de la graisse, correspondant à la consistance de la graisse mesurée en terme de pénétrabilité
selon l'ISO 2137.
3.3 Dans le présent système de classification, la désignation des produits est effectuée de façon uniforme. Chaque
lettre ayant une signification propre, l'ordre d'écriture indiqué dans le T
...

SLOVENSKI SIST ISO 6743-9
prva izdaja
STANDARD
december 2002











Maziva, industrijska olja in sorodni proizvodi (skupina L) - Klasifikacija -
9. del: Podskupina X (masti)

(enakovreden ISO 6743-9:1987)

Lubricants, industrial oils and related products (class L) - Classification - Part 9:
Family X (Greases)

Lubrifiants, huiles industrielles et produits connexes (classe L) - Classification -
Partie 9: Famille X (graisses)



















Deskriptorji:




Referenčna številka
ICS 75.100 SIST ISO 6743-9:2002 (sl)


Nadaljevanje na straneh od 2 do 8



© Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ISO 6743-9 : 2002
NACIONALNI UVOD
Standard SIST ISO 6743-9 (sl), Maziva, industrijska olja in sorodni proizvodi (skupina L) - Klasifikacija
– 9. del: Podskupina X (masti), prva izdaja, 2002, ima status slovenskega standarda in je
enakovreden mednarodnemu standardu ISO 6743-9 (en), Lubricants, industrial oils and related
products (class L) - Classification - Part 9: Family X (Greases), prva izdaja, 1987-11-15.
NACIONALNI PREDGOVOR
Mednarodni standard ISO 6743-9:1987 je pripravil mednarodni tehnični odbor ISO/TC 28 Naftni
proizvodi in maziva. Slovenski standard SIST ISO 6743-9:2002 je prevod angleškega besedila
mednarodnega standarda ISO 6743-9:1987. V primeru spora glede besedila slovenskega prevoda v
tem standardu je odločilen izvirni mednarodni standard v angleškem jeziku. Slovensko izdajo
standarda je pripravil tehnični odbor SIST/TC NAD Naftni proizvodi, maziva in sorodni proizvodi.
Ta slovenski standard je dne 2002-11- 07 odobrila direktorica SIST.
ZVEZE S STANDARDI
S prevzemom tega mednarodnega standarda veljajo za omejeni namen referenčnih standardov vsi
standardi, navedeni v izvirniku, razen tistih, ki so že sprejeti v nacionalno standardizacijo:
SIST ISO 6743 - 1 Maziva, industrijska olja in sorodni proizvodi (skupina L) - Klasifikacija -
1. del: Podskupina A (sistemi mazanja s popolnimi izgubami maziva)
SIST ISO 6743 - 2 Maziva, industrijska olja in sorodni proizvodi (skupina L) - Klasifikacija -
2. del: Podskupina F (ležaji za vretena, ležaji in ležaji sklopk)
SIST ISO 6743 - 3A Maziva, industrijska olja in sorodni proizvodi (skupina L) - Klasifikacija –
Del 3A: Podskupina D (kompresorji)
SIST ISO 6743 - 3B Maziva, industrijska olja in sorodni proizvodi (skupina L) - Klasifikacija –
Del 3B: Podskupina D (plinski in hladilni kompresorji)
SIST EN ISO 6743 - 4 Maziva, industrijska olja in sorodni proizvodi (skupina L) - Klasifikacija -
4. del: Podskupina H (hidravlični sistemi)
SIST ISO 6743 - 5 Maziva, industrijska olja in sorodni proizvodi (skupina L) - Klasifikacija -
5. del: Podskupina T (turbine)
SIST ISO 6743 - 6 Maziva, industrijska olja in sorodni proizvodi (skupina L) - Klasifikacija -
6. del: Podskupina C (zobniki)
SIST ISO 6743 - 7 Maziva, industrijska olja in sorodni proizvodi (skupina L) - Klasifikacija –
7. del: Podskupina M (obdelava kovin)
SIST ISO 6743 - 8 Maziva, industrijska olja in sorodni proizvodi (skupina L) – Klasifikacija –
8. del: Podskupina R (začasna protikorozijska zaščita)
SIST ISO 6743 - 10 Maziva, industrijska olja in sorodni proizvodi (skupina L) – Klasifikacija –
10. del: Podskupina Y (uporaba v druge namene)
SIST ISO 6743 - 11 Maziva, industrijska olja in sorodni proizvodi (skupina L) – Klasifikacija –
11. del: Podskupina P (pnevmatska orodja)
SIST ISO 6743 - 12 Maziva, industrijska olja in sorodni proizvodi (skupina L) – Klasifikacija –
12. del: Podskupina Q (tekočine za prenos toplote)
SIST ISO 6743 - 13 Maziva, industrijska olja in sorodni proizvodi (skupina L) – Klasifikacija –
13. del: Podskupina G (drsna vodila)
2

---------------------- Page: 2 ----------------------

SIST ISO 6743-9
SIST ISO 6743 - 14 Maziva, industrijska olja in sorodni proizvodi (skupina L) – Klasifikacija –
14. del: Podskupina U (toplotna obdelava)
SIST ISO 6743 - 15 Maziva, industrijska olja in sorodni proizvodi (skupina L) – Klasifikacija –
15. del: Podskupina E (olja za motorje z notranjim zgorevanjem)
OSNOVA ZA IZDAJO STANDARDA
– Prevzem standarda ISO 6743-9:1987.

OPOMBE
– Povsod, kjer se v besedilu standarda uporablja izraz “mednarodni standard”, v SIST ISO 6743-9:2002
to pomeni “slovenski standard”.
– Nacionalni uvod in nacionalni predgovor nista sestavni del standarda.
– Pri prevodu standarda ISO 6743-9:1987 se je SIST/TC NAD opiral na ISO 6743-99.

3

---------------------- Page: 3 ----------------------

SIST ISO 6743-9 : 2002
VSEBINA
Stran
1 Namen in področje uporabe.5
2 Zveza s standardoma.5
3 Razlaga simbolov .5
4 Podrobna klasifikacija.6


4

---------------------- Page: 4 ----------------------

SIST ISO 6743-9
Maziva, industrijska olja in sorodni proizvodi (skupina L) - Klasifikacija -
9. del: Po
...