ISO 8270

Windows and doors — Determination of the resistance to soft and heavy body impact for doors

This document specifies the method to be used to determine the damage caused by striking with a soft and heavy body, the face of a closed-door leaf fixed in its own door frame as part of a door set. This document applies to all doors. The method can also be used with respect to a door leaf submitted for a test in a frame, which the manufacturer considers appropriate to and typical for the intended utilization.

Fenêtres et portes – Détermination de la résistance au choc de corps mou et lourd pour les portes

General Information

• Status: Not Published
• Publication Date: 05-Feb-2023
• ICS: 91.060.50 - Doors and windows
• Technical Committee: ISO/TC 162 - Doors, windows and curtain walling
• Drafting Committee: ISO/TC 162 - Doors, windows and curtain walling
• Current Stage: 6060 - International Standard published
• Start Date: 06-Feb-2023
• Due Date: 26-Nov-2023
• Completion Date: 06-Feb-2023

Relations

• Revises: ISO 8270:1985 - Doorsets — Soft heavy body impact test
• Effective Date: 06-Jun-2022

Standards Content (Sample)

ISO 8270:2022(E)
ISO TC 162/WG 4
Date: 2022-11
Secretariat: DIN

Windows and doors — Determination of the resistance to soft and heavy body impact for doors

Second edition
Date: 2022-12-20
---------------------- Page: 1 ----------------------
ISO 8270:2022(E)
© ISO 2022

All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of

this publication may be reproduced or utilized otherwise in any form or by any means, electronic or

mechanical, including photocopying, or posting on the internet or an intranet, without prior written

permission. Permission can be requested from either ISO at the address below or ISO’sISO's member body

in the country of the requester.
ISO Copyright Office
CP 401 • CH. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: + 41 22 749 01 11
Email: [e-mail] [e-mail]
Website: www.iso.org
Published in Switzerland.
ii © ISO 2022 – All rights reserved
---------------------- Page: 2 ----------------------
ISO 8270:2022(E)
Contents

Foreword ...................................................................................................................................................................... 4

1 Scope ................................................................................................................................................................ 1

2 Normative references ................................................................................................................................ 1

3 Terms and definitions ................................................................................................................................ 1

4 General ............................................................................................................................................................ 1

5 Test apparatus .............................................................................................................................................. 2

5.1 Test surround ............................................................................................................................................... 2

5.2 Impact equipment ....................................................................................................................................... 2

5.3 Measuring equipment ................................................................................................................................ 2

6 Test specimens ............................................................................................................................................. 2

7 Procedure ...................................................................................................................................................... 2

8 Expression of results .................................................................................................................................. 2

9 Test report ..................................................................................................................................................... 3

Figure 1 — Test apparatus for soft and heavy body impact test and test principle ............................. 4

Bibliography ............................................................................................................................................................... 5

© ISO 2022 – All rights reserved iii
---------------------- Page: 3 ----------------------
ISO 8270:2022(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national

standards bodies (ISO member bodies). The work of preparing International Standards is normally

carried out through ISO technical committees. Each member body interested in a subject for which a

technical committee has been established has the right to be represented on that committee.

International organizations, governmental and non-governmental, in liaison with ISO, also take part in

the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all

matters of electrotechnical standardization.

The procedures used to develop this document and those intended for its further maintenance are

described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the

different types of ISO documents should be noted. This document was drafted in accordance with the

editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of

any patent rights identified during the development of the document will be in the Introduction and/or

on the ISO list of patent declarations received (see www.iso.org/patents).

Any trade name used in this document is information given for the convenience of users and does not

constitute an endorsement.

For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and

expressions related to conformity assessment, as well as information about ISO's adherence to the

World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see

www.iso.org/iso/foreword.html.

This document was prepared by Technical Committee ISO/TC 162, Doors, windows and curtain walling.

This second edition cancels and replaces the first edition (ISO 8270:1985), which has been technically

revised.
The main changes are as follows:
— the title has been updated.revised;

— this document has been adapted to the current state of the art on thewith Reference [1] as a basis of

EN 949.;
— the technical content is described more preciselyhas been precised.

Any feedback or questions on this document should be directed to the user’s national standards body. A

complete listing of these bodies can be found at www.iso.org/members.html.
iv © ISO 2022 – All rights reserved
---------------------- Page: 4 ----------------------
INTERNATIONAL STANDARD ISO 8270:2022(E)
...

INTERNATIONAL ISO
STANDARD 8270
Second edition
Windows and doors — Determination
of the resistance to soft and heavy
body impact for doors
Fenêtres et portes – Détermination de la résistance au choc de corps
mou et lourd pour les portes
PROOF/ÉPREUVE
Reference number
ISO 8270:2022(E)
© ISO 2022
---------------------- Page: 1 ----------------------
ISO 8270:2022(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2022

All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may

be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on

the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below

or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
PROOF/ÉPREUVE © ISO 2022 – All rights reserved
---------------------- Page: 2 ----------------------
ISO 8270:2022(E)
Contents Page

Foreword ........................................................................................................................................................................................................................................iv

1 Scope ................................................................................................................................................................................................................................. 1

2 Normative references ..................................................................................................................................................................................... 1

3 Terms and definitions .................................................................................................................................................................................... 1

4 General ........................................................................................................................................................................................................................... 1

5 Test apparatus ........................................................................................................................................................................................................1

5.1 Test surround .......................................................................................................................................................................................... 1

5.2 Impact equipment ................................................................................................................................................................................ 2

5.3 Measuring equipment ...................................................................................................................................................................... 2

6 Test specimens ....................................................................................................................................................................................................... 2

7 Procedure ....................................................................................................................................................................................................................2

8 Expression of results ....................................................................................................................................................................................... 2

9 Test report .................................................................................................................................................................................................................. 2

Bibliography ................................................................................................................................................................................................................................ 4

iii
© ISO 2022 – All rights reserved PROOF/ÉPREUVE
---------------------- Page: 3 ----------------------
ISO 8270:2022(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards

bodies (ISO member bodies). The work of preparing International Standards is normally carried out

through ISO technical committees. Each member body interested in a subject for which a technical

committee has been established has the right to be represented on that committee. International

organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.

ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of

electrotechnical standardization.

The procedures used to develop this document and those intended for its further maintenance are

described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the

different types of ISO documents should be noted. This document was drafted in accordance with the

editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of

any patent rights identified during the development of the document will be in the Introduction and/or

on the ISO list of patent declarations received (see www.iso.org/patents).

Any trade name used in this document is information given for the convenience of users and does not

constitute an endorsement.

For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and

expressions related to conformity assessment, as well as information about ISO's adherence to

the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see

www.iso.org/iso/foreword.html.

This document was prepared by Technical Committee ISO/TC 162, Doors, windows and curtain walling.

This second edition cancels and replaces the first edition (ISO 8270:1985), which has been technically

revised.
The main changes are as follows:
— the title has been revised;
— this document has been adapted to the current state of the art with Refer
...