ISO 6444:2005
(Main)Door leaves — Determination of the behaviour under humidity variations in successive uniform climates
Door leaves — Determination of the behaviour under humidity variations in successive uniform climates
ISO 6444:2005 describes the method which is to be used to test the behaviour under humidity variations of door leaves placed in successive uniform climates. ISO 6444:2005 can be applied to all door leaves, (e.g. solid doors, hollow core doors, panelled doors and glazed doors), which are nominally flat and rigid, and which contain hygroscopic materials can might influence their behaviour during this test.
Vantaux de portes — Détermination du comportement aux variations d'humidité entre des climats successifs uniformes
L'ISO 6444:2005 décrit la méthode à utiliser pour déterminer le comportement sous variations d'humidité de vantaux de portes placés dans des climats successifs uniformes. L'ISO 6444:2005 peut s'appliquer à tous les vantaux de portes (par exemples portes pleines, portes à âme creuse, portes à panneaux et portes vitrées) qui sont normalement plans et rigides et qui contiennent des matériaux hygroscopiques susceptibles d'influencer leur comportement pendant cet essai.
General Information
Relations
Standards Content (Sample)
INTERNATIONAL ISO
STANDARD 6444
Second edition
2005-10-15
Door leaves — Determination of the
behaviour under humidity variations in
successive uniform climates
Vantaux de portes — Détermination du comportement aux variations
d'humidité entre des climats successifs uniformes
Reference number
ISO 6444:2005(E)
©
ISO 2005
---------------------- Page: 1 ----------------------
ISO 6444:2005(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2005
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2005 – All rights reserved
---------------------- Page: 2 ----------------------
ISO 6444:2005(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 6444 was prepared by Technical Committee CEN/TC 33, Doors, windows, shutters, building hardware
and curtain walling (as EN 1294:2000) and was adopted, under a special “fast-track procedure”, by Technical
Committee ISO/TC 162, Doors and windows in parallel with its approval by the ISO member bodies.
This second edition cancels and replaces the first edition (ISO 6444:1980) which has been technically revised.
Throughout the text of this document, read “. this European Standard .” to mean “. this International
Standard .”.
© ISO 2005 – All rights reserved iii
---------------------- Page: 3 ----------------------
ISO 6444:2005(E)
FOREWORD
This European Standard has been prepared by Technical Committee CEN/TC 33 "Doors, windows, shutters,
building hardware and curtain walling", the secretariat of which is held by AFNOR.
This European Standard replaces EN 43:1985 „Methods of testing doors - Behaviour under humidity variations of
door leaves placed in successive uniform climates“.
This European Standard shall be given the status of a national standard, either by publication of an identical text or
by endorsement, at the latest by August 2000, and conflicting national standards shall be withdrawn at the latest by
August 2000.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,
France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden,
Switzerland and the United Kingdom.
This European Standard has been prepared taking into account ISO 6444 and EN 43.
This draft is one of a series of standards for doors.
iv © ISO 2005 – All rights reserved
---------------------- Page: 4 ----------------------
ISO 6444:2005(E)
Page 2
EN 1294:2000
1SCOPE
This European Standard describes the method which is to be used to test the behaviour under humidity variations of
door leaves placed in successive uniform climates.
This standard can be applied to all door leaves, (e.g. solid doors, hollow core doors, panelled doors and glazed doors),
which are nominally flat and rigid, and which contain hygroscopic materials can might influence their behaviour during
this test.
2 NORMATIVE REFERENCES
This European Standard incorporates by dated or undated refere
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.