Hygrothermal performance of building materials and products — Determination of moisture adsorption/desorption properties in response to humidity variation

ISO 24353:2008 specifies a test method for determining moisture adsorption/desorption properties of building materials in response to humidity variation. ISO 24353:2008 also defines the adsorption/desorption efficiency of building materials, measured as the change in mass of a specimen moved from a given space to another one of different relative humidity and equal temperature. Moisture adsorption/desorption properties of materials are measured under conditions of a single cycle and several cycles.

Performance hygrothermique des matériaux et produits pour le bâtiment — Détermination des propriétés d'adsorption/désorption de l'humidité en réponse à une fluctuation de l'humidité

General Information

Status
Published
Publication Date
31-Aug-2008
Current Stage
9093 - International Standard confirmed
Completion Date
04-Mar-2024
Ref Project

Relations

Buy Standard

Standard
ISO 24353:2008 - Hygrothermal performance of building materials and products -- Determination of moisture adsorption/desorption properties in response to humidity variation
English language
18 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 24353
First edition
2008-09-15


Hygrothermal performance of building
materials and products — Determination
of moisture adsorption/desorption
properties in response to humidity
variation
Performance hygrothermique des matériaux et produits pour le
bâtiment — Détermination des propriétés d'adsorption/désorption de
l'humidité en réponse à une fluctuation de l'humidité





Reference number
ISO 24353:2008(E)
©
ISO 2008

---------------------- Page: 1 ----------------------
ISO 24353:2008(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


COPYRIGHT PROTECTED DOCUMENT


©  ISO 2008
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland

ii © ISO 2008 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 24353:2008(E)
Contents Page
Foreword. iv
Introduction . v
1 Scope . 1
2 Normative references . 1
3 Terms, definitions and symbols. 1
3.1 Terms and definitions. 1
3.2 Symbols and units. 2
4 Test specimens . 3
4.1 General. 3
4.2 Size. 3
4.3 Thickness . 3
4.4 Number of specimens . 3
5 Test apparatus . 3
6 Setting of water vapour surface resistance . 4
7 Test method. 4
7.1 Test conditions . 4
7.2 Single cycle test of moisture adsorption/desorption content. 5
7.3 Cyclic test of regular moisture adsorption/desorption content . 6
8 Calculation.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.