ISO 15339-1:2024
(Main)Graphic technology — Printing from digital data across multiple technologies — Part 1: Principles
Graphic technology — Printing from digital data across multiple technologies — Part 1: Principles
This document establishes principles for the use of colour characterization data as the definition of the intended relationship between input data and printed colour for file preparation, job assembly, proofing, and graphic arts production printing. It specifies the procedure used to adjust colour characterization data for the normally expected range of substrate colour.
Technologie graphique — Impression à partir de données numériques via des technologies multiples — Partie 1: Principes
General Information
Relations
Buy Standard
Standards Content (Sample)
International
Standard
ISO 15339-1
First edition
Graphic technology — Printing
2024-06
from digital data across multiple
technologies —
Part 1:
Principles
Technologie graphique — Impression à partir de données
numériques via des technologies multiples —
Partie 1: Principes
Reference number
ISO 15339-1:2024(en) © ISO 2024
---------------------- Page: 1 ----------------------
ISO 15339-1:2024(en)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
© ISO 2024 – All rights reserved
ii
---------------------- Page: 2 ----------------------
ISO 15339-1:2024(en)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Requirements . 2
4.1 Principles and assumptions .2
4.2 Data encoding .3
4.3 Data preparation .3
4.4 Characterized reference printing conditions and colour characterization data .3
4.5 Use selection criteria for choice of characterized reference printing condition .3
4.6 Adjustment of data for substrate colour differences .3
4.7 Alternate printing reference .4
4.8 Colour profiles.4
5 Preparations for printing . 4
5.1 General .4
5.2 Printing to intended gamut .5
5.3 Determine colour characterization .5
5.4 Maintain running characteristics of the printing device — Tools and procedures .
...
International
Standard
ISO 15339-1
First edition
Graphic technology — Printing
from digital data across multiple
technologies —
Part 1:
Principles
Technologie graphique — Impression à partir de données
numériques via des technologies multiples —
Partie 1: Principes
PROOF/ÉPREUVE
Reference number
ISO 15339-1:2024(en) © ISO 2024
---------------------- Page: 1 ----------------------
ISO 15339-1:2024(en)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
PROOF/ÉPREUVE
© ISO 2024 – All rights reserved
ii
---------------------- Page: 2 ----------------------
ISO 15339-1:2024(en)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Requirements . 2
4.1 Principles and assumptions .2
4.2 Data encoding .3
4.3 Data preparation .3
4.4 Characterized reference printing conditions and colour characterization data .3
4.5 Use selection criteria for choice of characterized reference printing condition .3
4.6 Adjustment of data for substrate colour differences .3
4.7 Alternate printing reference .4
4.8 Colour profiles.4
5 Preparations for printing . 4
5.1 General .4
5.2 Printing to intended gamut .5
5.3 Determine colour characterization .5
5.4 Maintain running characteristics of the printing device — Tools and
...
Style Definition
ISO/PRF 15339-1 .
Formatted: Right: 1.5 cm, Bottom: 1 cm, Gutter: 0 cm,
ISO/TC 130 N 5134
Section start: New page, Header distance from edge:
1.27 cm, Footer distance from edge: 1.27 cm
ISO 15339-1
Formatted: English (United Kingdom)
ISO/TC 130/ WG 3
Secretariat: SAC
Date: 2024-04-1005-02
Formatted
...
Graphic technology — Printing from digital data across multiple
technologies — —
Formatted: Regular, Font: Bold, French (Switzerland)
Part 1:
Formatted: Cover Title_A2
Principles
Formatted
...
Technologie graphique — Impression à partir de données numériques via des technologies multiples —
Partie 1: Principes
PROOF
Formatted: Footer, Left, Space Before: 0 pt, After: 0
pt, Line spacing: single
Formatted: Font: 11 pt
© ISO 2023 – All rights reserved
---------------------- Page: 1 ----------------------
ISO/PRF 15339-1:2024(Een)
Formatted: Font: Bold
Formatted: Font: Bold
Formatted: Font: Bold, English (United Kingdom)
© ISO 20XX2024
Formatted: Font: Bold
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication Formatted: HeaderCentered
may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying,
Formatted: Font: Bold
or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO
Formatted: Default Paragraph Font
at the address below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: + 41 22 749 01 11
Formatted: French (Switzerland)
EmailE-mail: copyright@iso.org
Formatted: French (Switzerland)
Website: www.iso.orgwww.iso.org
Formatted: French (Switzerland)
Published in Switzerland
Formatted: FooterPageRomanNumber
2 © ISO 20232024 – All rights reserved
ii
---------------------- Page: 2 ----------------------
ISO/PRF 15339-1:2024(Een)
Formatted: Font: Bold
Formatted: Font: Bold, English (United Kingdom)
Formatted: Font: Bold
Contents
Formatted: Font: Bold, English (United Kingdom)
Formatted: HeaderCentered, Left
Foreword . v
Formatted: Font: Bold
Introduction . vi
Formatted: Font: Bold
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Requirements. 2
4.1 Principles and assumptions . 2
4.2 Data encoding . 3
4.3 Data preparation . 3
4.4 Characterized reference printing conditions and colour characterization data . 3
4.5 Use selection criteria for choice of characterized reference printing condition . 3
4.6 Adjustment of data for substrate colour differences . 4
4.7 Alternate printing reference . 4
4.8 Colour profiles . 4
5 Preparations for printing . 5
5.1 General . 5
5.2 Printing to intended gamut . 5
5.3 Determine colour characterization . 6
5.4 Maintain running characteristics of the printing de
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.