ISO 31-0:1992/Amd 1:1998

Quantities and units — Part 0: General principles — Amendment 1

Grandeurs et unités — Partie 0: Principes généraux — Amendement 1

Veličine in enote - 0. del: Splošna načela

General Information

• Status: Withdrawn
• Publication Date: 19-Dec-1998
• Withdrawal Date: 19-Dec-1998
• ICS: 01.060 - Quantities and units
• Technical Committee: ISO/TC 12 - Quantities and units
• Drafting Committee: ISO/TC 12 - Quantities and units
• Current Stage: 9599 - Withdrawal of International Standard
• Completion Date: 17-Nov-2009
• Ref Project: SIST ISO 31-0:1999/Amd. 1:2001 - Quantities and units — Part 0:General principles

Relations

• Revised: ISO 80000-1:2009 - Quantities and units — Part 1: General
• Effective Date: 15-Apr-2008
• Amends: ISO 31-0:1992 - Quantities and units — Part 0: General principles
• Effective Date: 06-Jun-2022
• Child: ISO 31-0:1992 - Quantities and units — Part 0: General principles
• Effective Date: 15-Apr-2008
• Child: SIST ISO 31-0+A1+A2:2007 - Quantities and units - Part 0: General principles
• Effective Date: 18-Apr-2008

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 31-0
Third edition
1992-08-01
AMENDMENT 1
1998-12-15
Quantities and units —
Part 0:
General principles
AMENDMENT 1
Grandeurs et unités —
Partie 0: Principes généraux
AMENDEMENT 1
A
Reference number
ISO 31-0:1992/Amd.1:1998(E)

---------------------- Page: 1 ----------------------
ISO 31-0:1992/Amd.1:1998(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide
federation of national standards bodies (ISO member bodies). The work of
preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which
a technical committee has been established has the right to be represented
on that committee. International organizations, governmental and non-
governmental, in liaison with ISO, also take part in the work. ISO
collaborates closely with the International Electrotechnical Commission
(IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting
a vote.
Amendment 1 to International Standard ISO 31-0:1992 was prepared by
Technical Committee ISO/TC 12, Quantities, units, symbols, conversion
factors.
©  ISO 1998
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced
or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from the publisher.
International Organization for Standardization
Case postale 56 • CH-1211 Genève 20 • Switzerland
Internet [e-mail]
Printed in Switzerland
ii

---------------------- Page: 2 ----------------------
©
ISO ISO 31-0:1992/Amd.1:1998(E)
Quantities and units —
Part 0:
General principles
AMENDMENT 1
Pages 4 and 5
Replace subclauses 2.3.2 to 2.3.2.2 with the following text. Table 1 is unchanged.
2.3.2  SI units and their decimal multiples and sub-multiples
The name International System of Units (Système International d’Unités), with the international abbreviation SI, was
adopted by the 11th General Conference on Weights and Measures (Conférence Générale des Poids et Mesures,
CGPM) in 1960.
This system includes
—  base units
—  derived units
which together form the coherent system of SI units.
2.3.2.1  Base units
T
...

NORME ISO
INTERNATIONALE 31-0
Troisième édition
1992-08-01
AMENDEMENT 1
1998-12-15
Grandeurs et unités —
Partie 0:
Principes généraux
AMENDEMENT 1
Quantities and units —
Part 0: General principles
AMENDMENT 1
A
Numéro de référence
ISO 31-0:1992/Amd.1:1998(F)

---------------------- Page: 1 ----------------------
ISO 31-0:1992/Amd.1:1998(F)
Avant-propos
L'ISO (Organisation internationale de normalisation) est une fédération
mondiale d'organismes nationaux de normalisation (comités membres de
l'ISO). L'élaboration des Normes internationales est en général confiée aux
comités techniques de l'ISO. Chaque comité membre intéressé par une
étude a le droit de faire partie du comité technique créé à cet effet. Les
organisations internationales, gouvernementales et non gouvernementales,
en liaison avec l'ISO participent également aux travaux. L'ISO collabore
étroitement avec la Commission électrotechnique internationale (CEI) en
ce qui concerne la normalisation électrotechnique.
Les projets de Normes internationales adoptés par les comités techniques
sont soumis aux comités membres pour vote. Leur publication comme
Normes internationales requiert l'approbation de 75 % au moins des
comités membres votants.
L'Amendement 1 à l'ISO 31-0:1992 a été élaboré par le comité technique
ISO/TC 12, Grandeurs, unités, symboles, facteurs de conversion.
©  ISO 1998
Droits de reproduction réservés. Sauf prescription différente, aucune partie de cette publi-
cation ne peut être reproduite ni utilisée sous quelque forme que ce soit et par aucun pro-
cédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l'accord
écrit de l'éditeur.
Organisation internationale de normalisation
Case postale 56 • CH-1211 Genève 20 • Suisse
Internet [e-mail]
Imprimé en Suisse
ii

---------------------- Page: 2 ----------------------
©
ISO ISO 31-0:1992/Amd.1:1998(F)
Grandeurs et unités —
Partie 0:
Principes généraux
AMENDEMENT 1
Pages 5 et 6
Remplacer les paragraphes 2.3.2 à 2.3.2.2 par le texte suivant. Le tableau 1 est inchangé.
2.3.2  Unités SI et leurs multiples et sous-multiples décimaux
e
Le nom Système international d’unités et l’abréviation internationale SI ont été adoptés par la 11 Conférence
générale des poids et mesures (CPGM) en 1960.
Ce système comprend
—  les unités de base
—  les unités dérivées
qui forment ensemble le système cohérent d’unités SI.
2.3.2.1  Unités de base
Les sept unités de base sont énumérées dans le tableau 1.
2.3.2.2  Unités dérivées
On peut obtenir les exp
...

SLOVENSKI STANDARD
SIST ISO 31-0:1999/Amd. 1:2001
01-maj-2001
9HOLþLQHLQHQRWHGHO6SORãQDQDþHOD
Quantities and units — Part 0:General principles
Ta slovenski standard je istoveten z: ISO 31-0:1992/Amd 1:1998
ICS:
01.060 9HOLþLQHLQHQRWH Quantities and units
07.030 Fizika. Kemija Physics. Chemistry
SIST ISO 31-0:1999/Amd. 1:2001 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ISO 31-0:1999/Amd. 1:2001

---------------------- Page: 2 ----------------------

SIST ISO 31-0:1999/Amd. 1:2001
INTERNATIONAL ISO
STANDARD 31-0
Third edition
1992-08-01
AMENDMENT 1
1998-12-15
Quantities and units —
Part 0:
General principles
AMENDMENT 1
Grandeurs et unités —
Partie 0: Principes généraux
AMENDEMENT 1
A
Reference number
ISO 31-0:1992/Amd.1:1998(E)

---------------------- Page: 3 ----------------------

SIST ISO 31-0:1999/Amd. 1:2001
ISO 31-0:1992/Amd.1:1998(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide
federation of national standards bodies (ISO member bodies). The work of
preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which
a technical committee has been established has the right to be represented
on that committee. International organizations, governmental and non-
governmental, in liaison with ISO, also take part in the work. ISO
collaborates closely with the International Electrotechnical Commission
(IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting
a vote.
Amendment 1 to International Standard ISO 31-0:1992 was prepared by
Technical Committee ISO/TC 12, Quantities, units, symbols, conversion
factors.
©  ISO 1998
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced
or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from the publisher.
International Organization for Standardization
Case postale 56 • CH-1211 Genève 20 • Switzerland
Internet [e-mail]
Printed in Switzerland
ii

---------------------- Page: 4 ----------------------

SIST ISO 31-0:1999/Amd. 1:2001
©
ISO ISO 31-0:1992/Amd.1:1998(E)
Quantities and units —
Part 0:
General principles
AMENDMENT 1
Pages 4 and 5
Replace subclauses 2.3.2 to 2.3.2.2 with the following text. Table 1 is unchanged.
2.3.2  SI units and their decimal
...