ISO 23205:2014

Agricultural tractors — Instructional seat

ISO 23205:2014 specifies the minimum design and performance requirements for an instructional seat and restraint designed for limited use by a trainer or trainee or service person inside an enclosed cab of an agricultural tractor. The instructional seat is neither intended for, nor is it designed for use by, children.

Tracteurs agricoles — Siège de convoyeur

General Information

• Status: Published
• Publication Date: 20-Nov-2014
• ICS: 65.060.10 - Agricultural tractors and trailed vehicles
• Technical Committee: ISO/TC 23/SC 4 - Tractors
• Drafting Committee: ISO/TC 23/SC 4 - Tractors
• Current Stage: 9093 - International Standard confirmed
• Completion Date: 29-Oct-2020

Relations

• Revises: ISO 23205:2006 - Agricultural tractors — Instructional seat
• Effective Date: 25-Aug-2012

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 23205
Second edition
2014-12-15
Agricultural tractors — Instructional
seat
Tracteurs agricoles — Siège de convoyeur
Reference number
ISO 23205:2014(E)
©
ISO 2014

---------------------- Page: 1 ----------------------
ISO 23205:2014(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2014
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland
ii © ISO 2014 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 23205:2014(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Requirements . 1
© ISO 2014 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO 23205:2014(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity
assessment, as well as information about ISO’s adherence to the WTO principles in the Technical Barriers
to Trade (TBT) see the following URL: Foreword - Supplementary information
The committee responsible for this document is ISO/TC 23, Tractors and machinery for agriculture and
forestry, Subcommittee SC 4, Tractors.
This second edition cancels and replaces the first edition (ISO 23205:2006), of which has been
technically revised.
iv © ISO 2014 – All rights reserved

---------------------- Page: 4 ----------------------
ISO 23205:2014(E)

Introduction
This International Standard is intended to guide the manufacturer who wishes to supply an instructional
seat and restraint inside the enclosed cab of an agricultural tractor. Nevertheless, many types of
agricultural tractors will not be able to accommodate this feature.
This International Standard is recognition that an instructional seat for a trainer or trainee or service
person on an agricultural tractor can be useful when providing training or instruction, or to enable a
second person to aid in problem diagnosis.
Agricultural tractors equipped with ROPS (rollover protective structure) cabs large enough to
accommodate two persons — one se
...