ISO 6085:2023/Amd 1
(Amendment)Building construction machinery and equipment — Self-loading mobile concrete mixers — Safety requirements and verification — Amendment 1: Vertical test object height for the visibility measurements
Building construction machinery and equipment — Self-loading mobile concrete mixers — Safety requirements and verification — Amendment 1: Vertical test object height for the visibility measurements
Machines et matériels pour la construction des bâtiments — Malaxeurs à béton mobiles avec autochargeur — Exigences de sécurité et vérification — Amendement 1: Titre manque
General Information
Relations
Buy Standard
Standards Content (Sample)
International
Standard
ISO 6085
First edition
Building construction machinery
2023-02
and equipment — Self-loading
mobile concrete mixers — Safety
AMENDMENT 1
requirements and verification
AMENDMENT 1: Vertical test object
height for the visibility measurements
PROOF/ÉPREUVE
Reference number
ISO 6085:2023/Amd.1:2024(en) © ISO 2024
ISO 6085:2023/Amd.1:2024(en)
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
PROOF/ÉPREUVE
ii
ISO 6085:2023/Amd.1:2024(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO document should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/
...
Date: 2024-05-24
ISO 6085:2023/DAMPRF Amd 1:2023(E)
ISO/TC 195/SC 1/WG9
Secretariat: JISC
Date: 2024-06-06
Building construction machinery and equipment — Self-loading
mobile concrete mixers — Safety requirements and verification
AMENDMENT 1: Vertical test object height for the visibility
measurements
Machines et matériels pour la construction des bâtiments — Malaxeurs à béton mobiles avec autochargeur
— Exigences de sécurité et vérification
AMENDEMENT 1: Hauteur de l'objet vertical d'essai pour les mesurages de visibilité
Copyright notice
ThisPROOF
ISO 6085:2023/DAMPRF Amd 1:2023(E(en)
© ISO document is a Draft International Standard and is copyright-protected by ISO. Except as permitted under 2023
All rights reserved. Unless otherwise specified, or required in the applicable lawscontext of the user's country, neither its
implementation, no part of this ISO draft nor any extract from itpublication may be reproduced, stored in a retrieval
system or transmitted or utilized otherwise in any form or by any means, electronic, or mechanical, including
photocopying, recording or otherwiseor posting on the internet or an intranet, without prior written permission being
secured.
Requests for permission to reproduce should be addressed to . Permission can be requested from either ISO at the
address below or ISO'sISO’s member body in the country of the requester.
ISO copyright office
Case postale 56 • CP 401 • Ch. de Blandonnet 8
CH-12111214 Vernier, Geneva 20
Tel.Phone: + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail: copyright@iso.org
WebWebsite: www.iso.org
Reproduction may be subject to royalty payments or a licensing agreement.
Violators may be prosecuted.
Published in Switzerland
iii
ISO 6085:2023/DAMPRF Amd 1:2023(E(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
Intern
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.