ISO 13105-2:2023

Building construction machinery and equipment — Machinery for concrete surface floating and finishing — Part 2: Safety requirements and verification

This document specifies safety requirements for machines used for concrete surface floating and finishing. This includes pedestrian-controlled equipment and ride-on equipment. This document is not applicable to: — internal or external vibrators or ancillary equipment used with internal and external vibrators, e.g. air compressors, hydraulic power sources, and voltage transformers; — remote-controlled or hand-held smoothing machines and self-acting (e.g. robotic) smoothing machines; — strike-off type machines commonly known as screeds. This document deals with significant hazards, hazardous situations, or hazardous events relevant to machinery for concrete surface floating and finishing (power trowels) when used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer. This document is not applicable to machines which are manufactured before the date of its publication.

Machines et matériels pour la construction des bâtiments — Talocheuses-lisseuses de mortier — Partie 2: Exigences de sécurité et de vérification

General Information

• Status: Published
• Publication Date: 26-Oct-2023
• ICS: 13.110 - Safety of machinery
• ICS: 91.220 - Construction equipment
• Technical Committee: ISO/TC 195/SC 1 - Machinery and equipment for concrete work
• Drafting Committee: ISO/TC 195/SC 1 - Machinery and equipment for concrete work
• Current Stage: 6060 - International Standard published
• Start Date: 27-Oct-2023
• Due Date: 04-Apr-2025
• Completion Date: 27-Oct-2023

Relations

• Revises: ISO 13105-2:2014/Amd 1:2017 - Building construction machinery and equipment — Machinery for concrete surface floating and finishing — Part 2: Safety requirements and verification — Amendment 1
• Effective Date: 06-Jun-2022
• Revises: ISO 13105-2:2014 - Building construction machinery and equipment — Machinery for concrete surface floating and finishing — Part 2: Safety requirements and verification
• Effective Date: 06-Jun-2022

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 13105-2
Second edition
2023-10
Building construction machinery and
equipment — Machinery for concrete
surface floating and finishing —
Part 2:
Safety requirements and verification
Machines et matériels pour la construction des bâtiments —
Talocheuses-lisseuses de mortier —
Partie 2: Exigences de sécurité et de vérification
Reference number
ISO 13105-2:2023(E)
© ISO 2023

---------------------- Page: 1 ----------------------
ISO 13105-2:2023(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii
  © ISO 2023 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 13105-2:2023(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Safety requirements and/or protective/risk reduction measures .2
4.1 Overview . 2
4.2 General requirements for all machines . 2
4.2.1 Guarding of the rotating blades . 2
4.2.2 Blade guarding device ground clearance . 3
4.2.3 Blade pitch adjustment . 3
4.2.4 Electrical devices . 3
4.2.5 Hot parts . 4
4.2.6 Operator exposure to harmful gases . 4
4.2.7 Securing of machine parts . 4
4.2.8 Means for lifting . 4
4.2.9 Provisions for securing during transport . 4
4.2.10 Noise reduction . . . 4
4.2.11 Vibration reduction . 4
4.2.12 Electromagnetic compatibility (EMC) . 5
4.3 Safe
...

FINAL
INTERNATIONAL ISO/FDIS
DRAFT
STANDARD 13105-2
ISO/TC 195/SC 1
Building construction machinery and
Secretariat: JISC
equipment — Machinery for concrete
Voting begins on:
2023-08-03 surface floating and finishing —
Voting terminates on:
Part 2:
2023-09-28
Safety requirements and verification
Machines et matériels pour la construction des bâtiments —
Talocheuses-lisseuses de mortier —
Partie 2: Les exigences de sécurité et de vérification
RECIPIENTS OF THIS DRAFT ARE INVITED TO
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
Reference number
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/FDIS 13105-2:2023(E)
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS. © ISO 2023

---------------------- Page: 1 ----------------------
ISO/FDIS 13105-2:2023(E)
FINAL
INTERNATIONAL ISO/FDIS
DRAFT
STANDARD 13105-2
ISO/TC 195/SC 1
Building construction machinery and
Secretariat: JISC
equipment — Machinery for concrete
Voting begins on:
surface floating and finishing —
Voting terminates on:
Part 2:
Safety requirements and verification
Machines et matériels pour la construction des bâtiments —
Talocheuses-lisseuses de mortier —
Partie 2: Les exigences de sécurité et de vérification
COPYRIGHT PROTECTED DOCUMENT
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
RECIPIENTS OF THIS DRAFT ARE INVITED TO
ISO copyright office
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
CP 401 • Ch. de Blandonnet 8
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
CH-1214 Vernier, Geneva
DOCUMENTATION.
Phone: [phone]
IN ADDITION TO THEIR EVALUATION AS
Reference number
Email: [e-mail]
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/FDIS 13105-2:2023(E)
Website: www.iso.org
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
Published in Switzerland
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
ii
  © ISO 2023 – All rights reserved
NATIONAL REGULATIONS. © ISO 2023

---------------------- Page: 2 ----------------------
ISO/FDIS 13105-2:2023(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Safety requirements and/or protective/risk reduction measures .2
4.1 Overview . 2
4.2 General requirements for all machines . 2
4.2.1 Guarding of the rotating blades . 2
4.2.2 Blade guarding device ground clearance . 3
4.2.3 Blade pitch adjustment . 3
4.2.4 Electrical devices .
...

2023-05-31
ISO/FDIS 13105-2:2023(E)
ISO/TC 195/SC 1/WG 2
Secretariat: JISC
Building construction machinery and equipment — Machinery for
concrete surface floating and finishing —
Part 2:
Safety requirements and verification
Machines et matériels pour la construction des bâtiments — Talocheuses-lisseuses de mortier —Partie 2:
Les exigences de sécurité et de vérification
Partie 2: Les exigences de sécurité et de vérification
FDIS stage
© ISO 2023 – All rights reserved

---------------------- Page: 1 ----------------------
ISO/FDIS 13105-2:2023(E)
© ISO 2022 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this
publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical,
including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can
be requested from either ISO at the address below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: + 41 22 749 01 11
EmailE-mail: [e-mail]
Website: www.iso.org
Published in Switzerland
ii © ISO 2023 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/FDIS 13105-2:2023(E)
Contents
Foreword . v
Introduction . vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Safety requirements and/or protective/risk reduction measures . 2
4.1 Overview . 2
4.2 General requirements for all machines . 2
4.2.1 Guarding of the rotating blades . 2
4.2.2 Blade guarding device ground clearance . 3
4.2.3 Blade pitch adjustment . 3
4.2.4 Electrical devices . 3
4.2.5 Hot parts . 4
4.2.6 Operator exposure to harmful gases . 4
4.2.7 Securing of machine parts . 4
4.2.8 Means for lifting . 4
4.2.9 Provisions for securing during transport. 4
4.2.10 Noise reduction . 4
4.2.11 Vibration reduction . 4
4.2.12 Electromagnetic compatibility (EMC) . 5
4.3 Safety requirements for pedestrian-controlled machines .
...