ISO/IEC 14443-1:2008

Identification cards — Contactless integrated circuit cards — Proximity cards — Part 1: Physical characteristics

ISO/IEC 14443-1:2008 defines the physical characteristics of PICCs, commonly known as proximity cards. It is to be used in conjunction with other parts of ISO/IEC 14443.

Cartes d'identification — Cartes à circuit(s) intégré(s) sans contact — Cartes de proximité — Partie 1: Caractéristiques physiques

General Information

• Status: Withdrawn
• Publication Date: 03-Jun-2008
• Withdrawal Date: 03-Jun-2008
• ICS: 35.240.15 - Identification cards. Chip cards. Biometrics
• Technical Committee: ISO/IEC JTC 1/SC 17 - Cards and security devices for personal identification
• Drafting Committee: ISO/IEC JTC 1/SC 17/WG 8 - Integrated circuit cards without contacts
• Current Stage: 9599 - Withdrawal of International Standard
• Completion Date: 21-Mar-2016

Relations

• Revised: ISO/IEC 14443-1:2016 - Identification cards — Contactless integrated circuit cards — Proximity cards — Part 1: Physical characteristics
• Effective Date: 21-Nov-2015
• Amended By: ISO/IEC 14443-1:2008/Amd 1:2012 - Identification cards — Contactless integrated circuit cards — Proximity cards — Part 1: Physical characteristics — Amendment 1: Additional PICC classes
• Effective Date: 21-Aug-2021
• Revises: ISO/IEC 14443-1:2000 - Identification cards — Contactless integrated circuit(s) cards — Proximity cards — Part 1: Physical characteristics
• Effective Date: 15-Apr-2008

Standards Content (Sample)

INTERNATIONAL ISO/IEC
STANDARD 14443-1
Second edition
2008-06-15


Identification cards — Contactless
integrated circuit cards — Proximity
cards —
Part 1:
Physical characteristics
Cartes d'identification — Cartes à circuit(s) intégré(s) sans contact —
Cartes de proximité —
Partie 1: Caractéristiques physiques





Reference number
ISO/IEC 14443-1:2008(E)
©
ISO/IEC 2008

---------------------- Page: 1 ----------------------
ISO/IEC 14443-1:2008(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


COPYRIGHT PROTECTED DOCUMENT


©  ISO/IEC 2008
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland

ii © ISO/IEC 2008 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/IEC 14443-1:2008(E)
Contents Page
Foreword. iv
Introduction . v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions. 1
4 Physical characteristics. 2
4.1 General. 2
4.2 Antenna. 2
4.3 Additional requirements for PICC classes. 2
4.4 Alternating magnetic field. 2
Annex A (normative) PICC class definitions . 3
A.1 “Class 1”. 3
A.1.1 Antenna location. 3
A.1.2 Electrical requirement . 3
Annex B (informative) Standards compatibility . 4

© ISO/IEC 2008 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO/IEC 14443-1:2008(E)
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are members of
ISO or IEC participate in the development of International Standards through technical committees
established by the respective organization to deal with particular fields of technical activity. ISO and IEC
technical committees collaborate in fields of mutual interest. Other international organizations, governmental
and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information
technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of the joint technical committee is to prepare International Standards. Draft International
Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as
an International Standard requires approval by at least 75 % of the national bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights.
ISO/IEC 14443-1 was prepared by Joint Technical Committee ISO/IEC JTC 1, Information technology,
Subcommittee SC 17, Cards and personal identification.
This second edition cancels and replaces the first edition (ISO/IEC 14443-1:2000), which has been technically
revised.
ISO/IEC 14443 consists of the following parts, under the general title Identification cards — Contactless
integrated circuit cards — Proximity cards:
⎯ Part 1: Physical characteristics
⎯ Part 2: Radio frequency power and signal interface
⎯ Part 3: Initialization and anticollision
⎯ Part 4: Transmission protocol
iv © ISO/IEC 2008 – All rights reserved

---------------------- Page: 4 ----------------------
ISO/IEC 14443-1:2008(E)
Introduction
C
...