ISO 13767:2012

Ships and marine technology — Ship's mooring and towing fittings — Shipside roller fairleads

This International Standard specifies the design, size and technical requirements for shipside roller fairleads installed to lead the mooring rope of a ship.

Navires et technologie maritime — Corps-morts et ferrures de remorquage de navires — Chaumards à rouleaux à quai

General Information

• Status: Withdrawn
• Publication Date: 24-Jun-2012
• Withdrawal Date: 24-Jun-2012
• ICS: 47.020.50 - Deck equipment and installations
• Technical Committee: ISO/TC 8/SC 4 - Outfitting and deck machinery
• Drafting Committee: ISO/TC 8/SC 4 - Outfitting and deck machinery
• Current Stage: 9599 - Withdrawal of International Standard
• Completion Date: 28-Aug-2020

Relations

• Revised: ISO 13767:2020 - Ships and marine technology — Ship's mooring and towing fittings — Shipside roller fairleads
• Effective Date: 30-Sep-2017

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 13767
First edition
2012-07-01
Ships and marine technology — Ship’s
mooring and towing fittings — Shipside
roller fairleads
Navires et technologie maritime — Corps-morts et ferrures de
remorquage de navires — Chaumards à rouleaux à quai
Reference number
ISO 13767:2012(E)
©
ISO 2012

---------------------- Page: 1 ----------------------
ISO 13767:2012(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2012
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO’s
member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland
ii © ISO 2012 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 13767:2012(E)
Contents Page
Foreword .iv
Introduction . v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Classification . 1
4.1 Type . 1
4.2 Nominal sizes . 1
5 Dimensions . 1
6 Materials . 2
7 Manufacturing and inspection . 2
8 Marking . 2
Annex A (informative) Basis for strength assessment of shipside roller fairleads . 6
Bibliography . 8
© ISO 2012 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO 13767:2012(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International
Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 13767 was prepared by Technical Committee ISO/TC 8, Ships and marine technology, Subcommittee
SC 4, Outfitting and deck machinery.
iv © ISO 2012 – All rights reserved

---------------------- Page: 4 ----------------------
ISO 13767:2012(E)
Introduction
The shipside roller fairlead is a type of ship’s mooring fitting installed on board to lead the mooring rope from
the ship’s inboard to outboard.
© ISO 2012 – All rights reserved v

---------------------- Page: 5 ----------------------
INTERNATIONAL STANDARD ISO 13767:2012(E)
Ships and marine technology — Ship’s mooring and towing
fittings — Shipside roller fairleads
1 Scope
This International Standard specifies the design, size and technical requirements for shipside roller fairleads
installed to lead the mooring rope of a ship.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced document
(including any amendments) applies.
ISO 13755, Ships and marine technology — Ship’s mooring and towing fittings — Steel rollers
IMO Circular MSC/Circ.1175, Guidance on shipboard towing and mooring equipment
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
safe working load
SWL
maximum load in kN on the rope that should normally be applied in service conditions
4 Classification
4.1 Type
Depending on the construction, roller fairleads shall be classified as the following two types:
— 2-roller type;
— 3-roller type.
4.2 Nominal sizes
The nominal sizes, D , of roller fairleads are denoted by reference to the outside diameter of the roller, in
n
millimetres, from a basic series of preferred numbers.
The nominal sizes are: 150, 200, 250, 300, 350, 400, 450 and 500.
5 Dimensions
Roller fairleads have dimensions and particulars in accordance with Tables 1 and 2, and Figures 1 and 2.
© ISO 2012 – All rights reserved 1

---------------------- Page: 6 ----------------------
ISO 13767:2012(E)
6 Materials
The following material shall be used for manufacturing the rolle
...