This document specifies the types, structure, dimensions, technical requirements, inspection and designation of single rungs and rungs for dog-step ladders, fitted to the vertical panel or masts of ships or other marine structures.

  • Standard
    8 pages
    English language
    sale 15% off
  • Standard
    9 pages
    French language
    sale 15% off

This document specifies the types, structure, dimension and technical requirements for vertical steel ladders to be fitted on board ships. This document applies to design and manufacture of vertical steel ladders.

  • Standard
    7 pages
    English language
    sale 15% off

This document provides requirements for production, use and inspection of deck coverings for shipbuilding. This document is applicable to deck coverings (underlay, cement type). It is not applicable to overlay floor coverings such as ceramic tile, carpet and rubber sheet.

  • Standard
    7 pages
    English language
    sale 15% off

This document specifies general requirements for the jacking system appliances on self-elevating unit, especially for the rack and pinion jacking system and yoke and pin jacking system. This document also includes acceptance tests for the jacking system, and requirements for nameplate, packing, transport and storage.

  • Standard
    7 pages
    English language
    sale 15% off
  • Draft
    6 pages
    English language
    sale 15% off

This document specifies the requirements for the design, operation, performance and acceptance test of the hydraulic or electric winches for trailing suction hopper dredgers. This document specifies the winches required to operate the suction pipe during dredging of the trailing suction hopper dredger winch, mainly including the draghead winch, gimbal winch and trunnion winch.

  • Standard
    6 pages
    English language
    sale 15% off
  • Draft
    6 pages
    English language
    sale 15% off
  • Draft
    6 pages
    English language
    sale 15% off

This document specifies requirements for the design, construction, safety, performance and acceptance testing of single-drum winches for oceanographic research (hereafter referred as to “single-drum winches”) with hydraulic or electric drive. Single-drum winches are mainly used for fixed-point and towing marine survey, involving marine geological sampling, seawater water body parameter measurement and marine biological survey.

  • Standard
    10 pages
    English language
    sale 15% off
  • Standard
    10 pages
    French language
    sale 15% off
  • Draft
    10 pages
    English language
    sale 15% off
  • Draft
    9 pages
    French language
    sale 15% off

This document specifies the requirements for the design, operation, performance and acceptance test of the hydraulic or electric winches in piling barge winch systems. This document specifies the winches required to operate the pile and the pile hammer during piling of the piling barge, mainly including the suspending pile winch, hammer start winch, suspending hammer winch and suspending hose winch.

  • Standard
    8 pages
    English language
    sale 15% off
  • Draft
    8 pages
    English language
    sale 15% off
  • Draft
    8 pages
    English language
    sale 15% off

This document specifies the design, operation, performance and acceptance test of A-frame launch and recovery systems (hereinafter referred to as “A-frame LARS”) for underwater applications excluding lifesaving appliances. This document is applicable to the design, manufacturing, testing and acceptance of A-frame LARS for underwater applications excluding lifesaving appliances.

  • Standard
    10 pages
    English language
    sale 15% off
  • Draft
    10 pages
    English language
    sale 15% off
  • Draft
    10 pages
    English language
    sale 15% off

This document specifies requirements for the design, construction, safety, performance and acceptance testing of dual traction/stowage winches for oceanographic research (hereafter referred as to “dual traction/stowage winches”), with hydraulic and electric drive. Dual traction/stowage winches are mainly used for fixed-point and towing marine survey, involving marine geological sampling, seawater water body parameter measurement and marine biological survey.

  • Standard
    9 pages
    English language
    sale 15% off
  • Draft
    9 pages
    English language
    sale 15% off

This document specifies procedures and methods for the factory acceptance test for the complete set of windlass and winch system, which is performed after the equipment is assembled. The test methods and procedures specified in this document apply to windlasses and winches.

  • Standard
    7 pages
    English language
    sale 15% off
  • Draft
    6 pages
    English language
    sale 15% off

This document specifies the structure, technical requirements and test methods of gratings for fibre-reinforced plastics (FRP) in the marine industry. It also defines terms related to FRP gratings. This document is applicable to the design, manufacture and inspection of self-support FRP gratings used for pedestrian pathways and platforms on ships or offshore platforms.

  • Standard
    14 pages
    English language
    sale 15% off
  • Draft
    14 pages
    English language
    sale 15% off

This document specifies requirements for the design, manufacture, operation, safety, performance, acceptance tests and designation system of deep-sea hydraulic winch equipment (hereafter referred to as “winch equipment”). The deep-sea hydraulic winch equipment are intended to be used for large load deep-sea operations in depths of 3 000 m to 11 000 m.

  • Standard
    8 pages
    English language
    sale 15% off
  • Draft
    6 pages
    English language
    sale 15% off

This document specifies types, dimensions, tests and other technical requirements for combined rigging used for deep-sea mooring (hereinafter referred to as “combined rigging”). This document is applicable to the combined rigging consisting of high modulus polyethylene (HMPE) fibre ropes, mooring chains, and shackles used for mooring and positioning offshore structures with depths of 1 000 m to 5 000 m.

  • Standard
    11 pages
    English language
    sale 15% off
  • Draft
    11 pages
    English language
    sale 15% off
  • Draft
    11 pages
    English language
    sale 15% off

This document specifies the technical requirements and test methods for escorting and pull-back system for tankers. This document is applicable to the escorting and pull-back system for tankers not less than 20 000 deadweight tonnes (DWT).

  • Standard
    7 pages
    English language
    sale 15% off

This document specifies requirements and recommendations for the attachments and associated equipment of pilot ladders, and gives guidance on their use. It is applicable, but not limited to, securing ladders at less than full length, deck securing points, hull securing equipment, man-ropes, bulwark openings and accesses, deck access, stanchions, anti-chafing arrangements, and interfaces between pilot ladders and accommodation ladders for their combined use.

  • Standard
    6 pages
    English language
    sale 15% off
  • Standard
    6 pages
    French language
    sale 15% off
  • Standard
    6 pages
    French language
    sale 15% off

This document specifies the shape, proportions, dimensions and tolerances of the component parts of stud-link anchor chains. NOTE Statutory requirements, rules and regulations can be applicable to the individual ships concerned.

  • Standard
    34 pages
    English language
    sale 15% off
  • Draft
    34 pages
    English language
    sale 15% off

This document provides a classification of anchor chain releasers and a description of their structure. It also specifies their basic dimensions, requirements and test methods, and their marking and surface signs. It is applicable to the design, production and acceptance of anchor chain releasers.

  • Standard
    13 pages
    English language
    sale 15% off
  • Draft
    13 pages
    English language
    sale 15% off

This document specifies the design and production requirements, test methods, marking and inspection certificate for high holding power balance anchors (hereinafter referred to as anchors). It is applicable to the design, selection, production and acceptance of high holding power balance anchors.

  • Standard
    16 pages
    English language
    sale 15% off
  • Draft
    16 pages
    English language
    sale 15% off

This document specifies requirements for the design, strength, safety, function and operation of adjustable roller-type chain stoppers. It also specifies their structure, materials, acceptance and marking. It is applicable to the design, manufacture and acceptance of adjustable roller-type chain stoppers.

  • Standard
    14 pages
    English language
    sale 15% off
  • Draft
    14 pages
    English language
    sale 15% off

This document specifies requirements and characteristics of ships’ pilot ladder winch reels provided with hydraulic, pneumatic, electric, or manual drive. It is applicable to the design and test of pilot ladder winch reels. It does not include requirements for the prime mover used to operate the pilot ladder winch reels. Pilot ladder winch reels specified in this document are intended to be only used with pilot ladders conforming to ISO 799-1. They are not intended to be used for ‘man lifting’ activities.

  • Standard
    7 pages
    English language
    sale 15% off
  • Draft
    7 pages
    English language
    sale 15% off

This document provides requirements and recommendations for the maintenance, use, storage, and inspection of pilot ladders.

  • Standard
    14 pages
    English language
    sale 15% off
  • Draft
    14 pages
    English language
    sale 15% off

This document specifies requirements for the design, operation, performance and acceptance tests of marine shark jaws and towing pins having electric, hydraulic, diesel or steam drive. It is applicable to the design, manufacture and acceptance of marine shark jaws and towing pins.

  • Standard
    9 pages
    English language
    sale 15% off
  • Draft
    9 pages
    English language
    sale 15% off

This document specifies the classification, requirements, test methods and inspection rules, as well as marking, packaging, shipping and storage requirements for multifunctional manipulators for deck operations (hereinafter referred to as "multifunctional manipulators"). It is applicable to the design, manufacture and acceptance of double folding multifunctional manipulators for clamping and tidying the anchor chain and ropes in deck operations.

  • Standard
    12 pages
    English language
    sale 15% off
  • Draft
    12 pages
    English language
    sale 15% off

This document specifies requirements for the design, operation and acceptance tests of hose reels for crude oil offloading systems. It is applicable to the design, manufacture and acceptance of hose reels for crude oil offloading systems used on marine structures such as floating production storage & offloading (FPSO) and mobile platforms.

  • Standard
    6 pages
    English language
    sale 15% off
  • Draft
    6 pages
    English language
    sale 15% off

This document specifies requirements for the design, operation, performance, and acceptance tests of tandem mooring winches. It is applicable to the design, manufacture and acceptance of tandem mooring winches for crude oil offloading systems of liquid cargo handling equipment.

  • Standard
    7 pages
    English language
    sale 15% off
  • Draft
    7 pages
    English language
    sale 15% off

This document specifies the types, nominal sizes, dimensions and materials, as well as construction, manufacturing and marking requirements, for steel rollers installed to lead the mooring rope of a ship.

  • Standard
    18 pages
    English language
    sale 15% off
  • Draft
    18 pages
    English language
    sale 15% off

This document specifies the types, nominal sizes, dimensions and materials, as well as construction, manufacturing and marking requirements, for shipside roller fairleads installed to lead the mooring rope of a ship.

  • Standard
    10 pages
    English language
    sale 15% off
  • Draft
    10 pages
    English language
    sale 15% off

This document specifies the types, nominal sizes, dimensions and materials, as well as construction, manufacturing and marking requirements, for the seats for Panama chocks installed to lead the mooring and towing rope of a ship. It is applicable to ships passing through the Panama Canal, which are normally assisted by locomotives using steel towing wires and/or by tug boats. These seats for chocks meet normal mooring requirements and Panama Canal requirements. NOTE The seat for Panama chocks (SWL of 90 tons) for Panamax Plus and Neopanamax vessels can be replaced by seats for closed chocks (see ISO 23113).

  • Standard
    14 pages
    English language
    sale 15% off
  • Draft
    14 pages
    English language
    sale 15% off

This document specifies the types, nominal sizes, dimensions and materials, as well as construction, manufacturing and marking requirements, for the seats for closed chocks installed to lead the mooring and towing rope of a ship,

  • Standard
    13 pages
    English language
    sale 15% off
  • Draft
    13 pages
    English language
    sale 15% off

This document specifies the types, nominal sizes, dimensions and materials, as well as construction, manufacturing and marking requirements, for universal fairleads without upper roller(s) installed to lead the mooring rope of a ship.

  • Standard
    19 pages
    English language
    sale 15% off
  • Draft
    19 pages
    English language
    sale 15% off

This document specifies the types, nominal sizes, dimensions and materials, as well as construction, manufacturing and marking requirements, for universal fairleads with upper roller(s) installed to lead the mooring rope of a ship.

  • Standard
    20 pages
    English language
    sale 15% off
  • Draft
    20 pages
    English language
    sale 15% off

This document specifies the types, nominal sizes, dimensions and materials, as well as construction, manufacturing and marking requirements, for mooring chocks installed to lead the mooring and towing rope of a ship.

  • Standard
    11 pages
    English language
    sale 15% off
  • Draft
    11 pages
    English language
    sale 15% off

This document specifies the types, nominal sizes, dimensions and materials, as well as construction, manufacturing and marking requirements, for the seats for mooring chocks installed to lead the mooring and towing rope of a ship.

  • Standard
    13 pages
    English language
    sale 15% off
  • Draft
    13 pages
    English language
    sale 15% off

This document specifies the types, nominal sizes, dimensions and materials, as well as construction, manufacturing and marking requirements, for welded steel bollards suitable for installation on sea-going vessels to meet normal mooring and towing requirements.

  • Standard
    13 pages
    English language
    sale 15% off
  • Draft
    13 pages
    English language
    sale 15% off

This document specifies the types, nominal sizes, dimensions and materials, as well as construction, manufacturing and marking requirements, for cruciform bollards suitable for installation on sea-going vessels to meet normal mooring and towing requirements.

  • Standard
    7 pages
    English language
    sale 15% off
  • Draft
    7 pages
    English language
    sale 15% off

This document specifies the types, nominal sizes, dimensions and materials, as well as construction, manufacturing and marking requirements, for Panama chocks installed to lead the mooring and towing rope of a ship. It is intended for ships passing through the Panama Canal, which are normally assisted through the locks by locomotives using steel towing wires and/or by tug boats. These chocks meet normal mooring requirements and Panama Canal requirements; they are suitable for mooring vessels inside the Panama Canal locks. NOTE The Panama chocks (SWL of 90 tons) for the Panamax Plus and Neopanamax vessels can be replaced by closed chocks (see ISO 13729).

  • Standard
    12 pages
    English language
    sale 15% off
  • Draft
    12 pages
    English language
    sale 15% off

This document specifies the types, nominal sizes, dimensions and materials, as well as construction, manufacturing and marking requirements, for steel plate type recessed bitts to meet normal towing requirements.

  • Standard
    6 pages
    English language
    sale 15% off
  • Draft
    6 pages
    English language
    sale 15% off

This document specifies the types, nominal sizes, dimensions and materials, as well as construction, manufacturing and marking requirements, for closed chocks installed to lead the mooring and towing rope of a ship.

  • Standard
    14 pages
    English language
    sale 15% off
  • Draft
    14 pages
    English language
    sale 15% off

This document specifies the nominal sizes, dimensions and materials, as well as construction, manufacturing and marking requirements, for pedestal fairleads installed to lead the mooring rope of a ship.

  • Standard
    8 pages
    English language
    sale 15% off
  • Draft
    8 pages
    English language
    sale 15% off

This document specifies the types, nominal sizes, dimensions and materials, as well as construction, manufacturing and marking requirements, for casting type recessed bitts to meet normal towing requirements.

  • Standard
    8 pages
    English language
    sale 15% off
  • Draft
    8 pages
    English language
    sale 15% off

This document provides comprehensive requirements and guidance for the planning and engineering of port and marine operations of offshore wind farms, encompassing all documents and works related to such operations, e.g. the design and analysis of the components, systems, equipment and procedures required to perform port and marine operations, as well as the methods or procedures developed to carry them out safely. This document is intended to be comprehensive, covering all relevant information related to port and marine operations necessary for loadout, offshore transport, installation, offshore commissioning works, operation and maintenance, component exchange, repair operations and decommissioning or redeployment of offshore wind farms. This document is applicable to port and marine operations for offshore structures including: — lattice structure foundations made from steel; — concrete gravity base structures (GBS); — piled steel foundation or mixed steel and concrete foundation structures; — subsea templates and similar temporary structures or installation aids; — steel or mixed material towers, nacelles and blades forming part of the wind turbine generators (WTG); — floating turbines moored to the seabed; — self-elevating offshore units for offshore substations or offshore accommodations platforms; — launching systems at sea from quay side or onshore; — array cables within the wind farms as well as export cables connecting the wind farm to the grid. This document is also applicable to modifications of existing structures, e.g. installation of additional modules, exchange of components or decommissioning, and to marine operations during the service life of the windfarm related to the technical maintenance works. It is not applicable to the following operations: — construction activities, e.g. in a fabrication yard onshore, where there is no exposure to the marine environment; — road transport onshore; — diving.

  • Standard
    205 pages
    English language
    sale 15% off
  • Standard
    205 pages
    English language
    sale 15% off

This document specifies dimensions and safety requirements for manually operated and power-operated coupling devices used for assembling inland navigation vessels as push tows or for coupling vessels alongside by means of rope connections. The coupling device secures the stable positioning of the coupled vessels. Safety requirements to protect operators from accidents during the creation, operation, and separation of the rope connections of push tows and vessels coupled alongside are specified in this document. It also gives rules for designation and testing.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies a classification, technical requirements and test methods, as well as designation, marking and documentation requirements for mooring positioning windlasses and winches of mobile offshore floating units, including drill-ships, semi-submersible drilling rigs, production platforms and offshore accommodation platforms. It can be used as a reference for ship-shifting positioning winches of pipelaying, crane and pile-driving vessels. This document is applicable to the design, manufacturing and acceptance testing of mooring positioning windlasses and winches.

  • Standard
    12 pages
    English language
    sale 15% off
  • Standard
    12 pages
    English language
    sale 15% off

This document specifies the requirements for the profiles, dimensions, tolerances, materials and inspection of chain wheels for chains on mobile offshore units. Chain wheels meeting the requirements of this document can be used with offshore mooring chains conforming to ISO 20438.

  • Standard
    9 pages
    English language
    sale 15% off

This document specifies a test method to assess the performance of stairsteps using electrical resistance trace heating to provide anti-icing in low temperature environments, when installed for exterior applications. It includes requirements for the test facility, the test conditions, the test specimens, the test procedures and the test report.

  • Standard
    8 pages
    English language
    sale 15% off

This document specifies a test method to assess the performance of walkways using electrical resistance trace heating to provide anti-icing in low temperature environments, when installed for exterior applications. It includes requirements for the test facility, the test conditions, the test specimens, the test procedures and the test report.

  • Standard
    8 pages
    English language
    sale 15% off

This document specifies a test method to assess the performance of handrails using electrical resistance trace heating to provide anti-icing in low temperature environments, when installed for exterior applications. It includes requirements for the test facility, the test conditions, the test specimens, the test procedures and the test report.

  • Standard
    8 pages
    English language
    sale 15% off

This document specifies the technical requirements, test methods, inspection rules and markings for major components of emergency towing arrangements (ETA) provided for tankers, gas carriers (LPG, LNG, etc.) and chemical vessels no less than 20 000 deadweight tonnes (DWT). It is only applicable to emergency towing arrangements as defined in 3.1. NOTE For any other applications, such as for mooring at a single point mooring (SPM) facility, the appropriate standards need to be referred to.

  • Standard
    19 pages
    English language
    sale 15% off

This document specifies requirements for pilot ladders of a ship, which are provided to enable a maritime pilot to embark and disembark from a ship safely against a vertical portion of the ship's hull. It is applicable to merchant ships which embark and disembark maritime pilots with the ship underway.

  • Standard
    14 pages
    English language
    sale 15% off

ISO 7825 specifies the characteristics common to all deck machinery of any type not detailed in the relevant specific International Standards. ISO 7825 is applicable to ships in all navigation zones.

  • Standard
    5 pages
    English language
    sale 15% off