ISO 124:1985

Rubber latices — Determination of total solids content

Latex de caoutchouc — Détermination des matières solides totales

General Information

• Status: Withdrawn
• Publication Date: 30-Oct-1985
• Withdrawal Date: 30-Oct-1985
• ICS: 83.040.10 - Latex and raw rubber
• Technical Committee: ISO/TC 45/SC 3 - Raw materials (including latex) for use in the rubber industry
• Drafting Committee: ISO/TC 45/SC 3/WG 2 - Latex
• Current Stage: 9599 - Withdrawal of International Standard
• Completion Date: 05-Mar-1992

Relations

• Revised: ISO 124:1992 - Rubber latices — Determination of total solids content
• Effective Date: 15-Apr-2008
• Revises: ISO 124:1974 - Rubber latices — Determination of total solids content
• Effective Date: 15-Apr-2008

Standards Content (Sample)

International Standard 124
INTERNATIONAL ORGANIZATION FOR STANDARDIZATIONOME~YHAPOnHAR OPrAHH3AUWR no CTAHILAPTH3AUHMWRGANlSATlON INTERNATIONALE DE NORMALISATION
Rubber latices - Determination of total solids content
CS
Latex de caoutchouc - DBtermination des matikres solides totales
Second edition - 1985-11-01
- UDC 678.031 :543.814 Ref. No. IS0 124-1985 (E)
W
-
Descriptors : rubber, natural rubber, synthetic rubber, latex, tests, determination of content, solids.
8
Price based on 2 pages
E
!3

---------------------- Page: 1 ----------------------
Foreword
IS0 (the International Organization for Standardization) is a worldwide federation of
national standards bodies (IS0 member bodies). The work of preparing International
Standards is normally carried out through IS0 technical committees. Each member
body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, govern-
mental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to
the member bodies for approval before their acceptance as International Standards by
the IS0 Council. They are approved in accordance with IS0 procedures requiring at
least 75 % approval by the member bodies voting.
International Standard IS0 124 was prepared by Technical Committee ISO/TC 45,
Rubber and rubber products.
IS0 124 was first published in 1974. This second edition cancels and replaces the first
edition, of which it constitutes a minor revision.
Users should note that all International Standards undergo revision from time to time
and that any reference made herein to any other International Standard implies its
latest edition, unless otherwise stated.
O International Organization for Standardization. 1985
Printed in Switzerland

---------------------- Page: 2 ----------------------
INTERNATIONAL STANDARD
IS0 124-1985 (E)
Rubber latices - Determination of total solids content
0
1 Scope and field of application
4.2 Oven, capable of being maintained at 70 k 2 OC or
loo k 2 OC.
This International Standard specifies a method for the deter-
mination of the total solids content of natural rubber latex con-
centrate which contains preservative agents and which has
4.3 Vacuum oven, capable of being maintained at
been prepared by some type of concentration process, and also
125 k 2 OC.
for the determination of the total solids content of synthetic
rubber latices.
The method is not necessarily suitable for latices from natural
sources other than Hevea brasiliensis or for compounded latex,
5 Sampling
vulcanized latex or artificial dispersions of rubber.
Carry out the sampling in accordance with one of the methods
specified in IS0 123.
2 Reference
IS0 123, Rubber latex - Sampling.
6 Procedure
3 Principle
For a natural rubber latex concentrate, proceed according to
6.1 and for a synthetic rubber latex proceed according to either
A test portion is heated
...

T
I
Norme internationale ' 124
INTERNATIONAL ORGANIZATION FOR STANDAROlZATION*MEXPYHAPOAHAR OPTAHM3AUMR Il0 CTAHAAPTl43AUMMWRGANlSATlON INTERNATIONALE DE NORMALISATION
r*
Latex de caoutchouc - Détermination des matieres
O
solides totales
Rubber latices - Determination of total solids content
DeuxSrne edition - 1985-11-01
O
- CDU 678.031 :543.814 R6f. no : IS0 124-1985 (FI
U-
Descripteurs : caoutchouc, caoutchouc naturel, caoutchouc synthbtique, latex, essai, dosage, solide.
t
A
-
Prix bas6 sur 2 pages
E

---------------------- Page: 1 ----------------------
Avant-propos
L'ISO (Organisation internationale de normalisation) est une federation mondiale
d'organismes nationaux de normalisation (cornites membres de I'ISO). L'elaboration
des Normes internationales est confiee aux comites techniques de WO. Chaque
comite membre interesse par une etude a le droit de faire partie du comite technique
cr66 B cet effet. Les organisations internationales, gouvernementales et non gouverne-
mentales, en liaison avec I'ISO participent Bgalement aux travaux.
Les projets de Normes internationales adoptes par les comites techniques sont soumis
aux comites membres pour approbation, avant leur acceptation comme Normes inter-
nationales par le Conseil de I'ISO. Les Normes internationales sont approuvees confor-
mement aux procedures de 1'60 qui requierent l'approbation de 75 % au moins des
comites membres votants.
La Norme internationale IS0 124 a et6 Blaboree par le comite technique ISO/TC 45,
&astomt!res et produits A base d'iVastomc?res.
La Norme internationale IS0 124 a et6 pour la premiere fois publiee en 1974. Cette
deuxieme edition annule et remplace la premiere Bdition, dont elle constitue une revi-
sion mineure.
L'attention des utilisateurs est attiree sur le fait que toutes les Normes internationales
sont de temps en temps soumises B revision et que toute reference faite B une autre
Norme internationale dans le present document implique qu'il s'agit, sauf indication
contraire, de la derniere edition.
. O Organisation internationale de normalisation, 1985 0
Imprime en Suisse

---------------------- Page: 2 ----------------------
NORME INTERNATIONALE
IS0 124-1985 (F)
Latex de caoutchouc - Dbtermination des matieres
solides totales
1 Objet et domaine d'application 4.2
ktuve, reglable b 70 f 2 OC ou A 100 f 2 OC.
La presente Norme internationale specifie une methode pour la
4.3 huve B vide, reglable B 125 f 2 OC.
determination des matibres solides totales dans le latex concen-
tre de caoutchouc naturel contenant des agents de preserva-
tion et qui a et6 prepare selon un procede quelconque de con-
5 Échantillonnage
centration, et 6galement pour la, determination des matibres
solides totales dans le latex de caoutchouc synthetique.
Effectuer I'khantillonnage selon l'une des methodes specifiees
dans I'ISO 123.
La methode ne convient pas necessairement aux latex d'origine
naturelle autres que celui de I'Hevee bresiliensis, aux melanges
de latex, aux latex vulcanises ou aux dispersions artificielles de
0
caoutchouc ou de caoutchouc synthetique. 6 Mode operatoire
Prodder comme indique en 6.1 pour le latex concentre de
2 Rdfdrence caoutchouc naturel, ou comme indique en 6.1 ou 6.2 pour le
latex de caoutchouc synthetique.
IS0 123, Latex de caoutchouc - Echantillonnage.
6.1 Chauffage sous p
...