ISO 17515-1:2015

Intelligent transport systems — Communications access for land mobiles (CALM) — Evolved universal terrestrial radio access network (E-UTRAN) — Part 1: General usage

ISO 17515-1:2015 enables usage of the E-UTRAN cellular network technology as an ITS access technology in an ITS station by specifying details of the "Communication Adaptation Layer" (CAL) and the "Management Adaptation Entity" (MAE) of communication interfaces specified in ISO 21218, and session management by reference to ISO 25111. Wherever practicable, this part of ISO 17515-1:2015 has been developed by reference to suitable extant standards, adopted by selection.

Systèmes intelligents de transport — Accès aux communications des services mobiles terrestres (CALM) — Réseau d'accès à la radio terrestre universelle évoluée (E-UTRAN) — Partie 1: D’usage général

General Information

• Status: Published
• Publication Date: 31-Aug-2015
• ICS: 03.220.20 - Road transport
• ICS: 35.240.60 - IT applications in transport
• Technical Committee: ISO/TC 204 - Intelligent transport systems
• Drafting Committee: ISO/TC 204/WG 16 - Communications
• Current Stage: 9060 - Close of review
• Start Date: 04-Mar-2026

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 17515-1
First edition
2015-09-01
Intelligent transport systems —
Communications access for land
mobiles (CALM) — Evolved Universal
Terrestrial Radio Access Network
(E-UTRAN) —
Part 1:
General usage
Systèmes intelligents de transport — Accès aux communications
des services mobiles terrestres (CALM) — Réseau d’accès à la radio
terrestre universelle évoluée (E-UTRAN) —
Partie 1: D’usage général
Reference number
ISO 17515-1:2015(E)
©
ISO 2015

---------------------- Page: 1 ----------------------
ISO 17515-1:2015(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2015, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. [phone]
Fax [phone]
[e-mail]
www.iso.org
ii © ISO 2015 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 17515-1:2015(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Abbreviated terms . 2
5 Adoption of other standards and internationally adopted practices .3
6 Communication and management adaptation . 3
6.1 Communication interface . 3
6.2 Communication adaptation . 3
6.2.1 Communication adaptation layer . 3
6.3 Management adaptation . 3
6.3.1 Management adaptation entity . 3
6.3.2 Mapping of E-UTRAN connection states to IS0 21218 CI states . 4
6.3.3 Connection and disconnection procedure . 4
6.4 CI parameters . 5
6.4.1 General. 5
6.4.2 E-UTRAN specific parameters . 5
6.4.3 Communication profile parameters . 5
7 Session establishment and termination procedures . 6
Annex A (informative) E-UTRAN initial access/default bearer establishment .7
Bibliography .10
© ISO 2015 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO 17515-1:2015(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity
assessment, as well as information about ISO’s adherence to the WTO principles in the Technical
Barriers to Trade (TBT) see the following URL: Foreword - Supplementary information
The committee responsible for this document is ISO/TC 204, Intelligent transport systems.
ISO 17515 consists of the following parts, under the general title Intelligent transport systems —
Communications access for land mobiles (CALM) — Evolved Universal Terrestrial Radio Access Network
(E-UTRAN):
— Part 1: General usage
Additional parts, dealing with direct communications and routing functionalities, are under preparation.
iv © ISO 2015 – All rights reserved

---------------------- Page: 4 ----------------------
ISO 17515-1:2015(E)

Introduction
This International Standard is a member of the set of International Standards developed under the
acronym “Communications Access for Land Mobiles” (CALM) that refers to ISO/TC 204 work items. An
introduction to this set of International Standards is provided in ISO 21217.
This part of ISO 17515 is part 1 of a multipart standard which determines usage of technology developed
under the acronym E-UTRAN for usage as a communication interface in an ITS station unit.
The term long-term evolution (LTE) is commonly used to refer to the set of standards containing the
E-UTRAN technical specifications. In this part of ISO 17515, the term “E-UTRAN” is used to refer to
these specifications and can be treated as a synonym for “LTE”.
© ISO 2015 – All rights reserved v

---------------------- Page: 5 ----------------------
INTERNATIONAL STANDARD ISO 17515-1:2015(E)
Intelligent transport systems — Communications access
for land mobiles (CALM) — Evolved Universal Terrestrial
Radio Access Network (E-UTRAN) —
Part 1:
General usage
1 Scope
This part of ISO 17515 enables usage of the E-UTRAN cellular network technology as an ITS access
technology in an ITS station by specifying details of the “Communication Adaptation Layer” (CAL) and
the “Management Adaptation Entity” (MAE) of communication interfaces specified in ISO 21218, and
session management by reference to ISO 25111.
Wherever practicable, this part of ISO 17515 has been developed by reference to suitable extant
standards, adopted by selection.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
ISO 21217:2014, Intelligent transport systems — Communications access for land mobiles (CALM) —
Architecture
ISO 21218:2013, Intelligent transport systems — Communications access for land mobiles (CALM) —
Access technology support
ISO 24102-3:2013, Intelligent transport systems — Communications access for land mobiles (CALM) — ITS
station management — Part 3: Service access points
ISO 25111:2009, Intelligent transport systems — Communications access for land mobiles (CALM) —
General requirements for using public networks
3GPP TS 36.331, Technical Specification Group Radio Access Network; Evolved Universal Terrestrial Radio
Access (E-UTRA); Radio Resource Control (RRC); Protocol specification (Release 10)
ETSI/TS 102 760-1, Intelligent Transport Systems (ITS); Communications Access for Land Mobiles (CALM);
Test specifications for Access Technology Support (ISO 21218); Part 1: Implementation Conformance
Statement (ICS) proforma
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
I-Parameter
parameter of a CI
[SOURCE: ISO 21218]
© ISO 2015 – All rights reserved 1

---------------------- Page: 6 ----------------------
ISO 17515-1:2015(E)

3.2
Link-ID
identifier of a link given by the address of a VCI
[SOURCE: ISO 21218]
3.3
MI-COMMAND
command issued by the ITS-S management entity and sent to the ITS-S access layer via the MI-SAP
[SOURCE: ISO 24102-3]
3.4
MI-REQUEST
command issued by the ITS-S access layer and sent to the ITS-S management entity via the MI-SAP
[SOURCE: ISO 24102-3]
4 Abbreviated terms
For the purposes of this document, the following abbreviated terms apply.
3GPP 3rd Generation Partnership Project
CAL Communication Adaptation Layer
(see ISO 21217)
CI Communication Interface
(see ISO 21217)
E-UTRAN Evolved Universal Terrestrial Radio Access Network
IN-SAP Communication SAP as offered by the CAL to the ITS-S networking and transport layer
(see ISO 21218)
ITS-S ITS Station
(see ISO 21217)
LTE Long Term Evolution
MAE Management Adaptation Entity
(see ISO 21217)
MI-SAP Management SAP as offered by the ITS-S management towards the MAE
(see ISO 21218)
UC-VCI VCI for reception from and transmission to a unicast MAC address
(see ISO 21218)
UE User Equipment
2 © ISO 2015 – All rights reserved

---------------------- Page: 7 ----------------------
ISO 17515-1:2015(E)

5 Adoption of other standards and internationally adopted practices
Equipment and systems complying with this part of ISO 17515 shall operate in the environment of, and
to the parameters defined in the following Internat
...