ISO/FDIS 15027-3

Immersion suits — Part 3: Test methods

Combinaisons de protection thermique en cas d'immersion — Partie 3: Méthodes d'essai

General Information

• Status: Not Published
• ICS: 13.340.10 - Protective clothing
• Technical Committee: ISO/TC 188/SC 1 - Personal safety equipment
• Drafting Committee: ISO/TC 188/SC 1 - Personal safety equipment
• Current Stage: 5000 - FDIS registered for formal approval
• Start Date: 15-Nov-2023
• Completion Date: 12-Apr-2024

Relations

• Consolidates: ISO 37158:2019 - Smart community infrastructures — Smart transportation using battery-powered buses for passenger services
• Effective Date: 06-Jun-2022
• Revises: ISO 15027-3:2012 - Immersion suits — Part 3: Test methods
• Effective Date: 23-Apr-2020

Standards Content (Sample)

DRAFT INTERNATIONAL STANDARD
ISO/DIS 15027-3
ISO/TC 188/SC 1 Secretariat: AFNOR
Voting begins on: Voting terminates on:
2023-05-03 2023-07-26
Immersion suits —
Part 3:
Test methods
Combinaisons de protection thermique en cas d'immersion —
Partie 3: Méthodes d'essai
ICS: 13.340.10
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 15027-3:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023

ISO/DIS 15027-3:2023(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 15027-3
ISO/TC 188/SC 1 Secretariat: AFNOR
Voting begins on: Voting terminates on:

Immersion suits —
Part 3:
Test methods
Combinaisons de protection thermique en cas d'immersion —
Partie 3: Méthodes d'essai
ICS: 13.340.10
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2023
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: [phone]
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: [e-mail]
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 15027-3:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023

ISO/DIS 15027-3:2023(E)
Contents Page
Foreword .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Testing of the device .3
4.1 General . 3
4.2 Sampling . 3
4.3 Temperature cycling test . . 3
4.3.1 General . 3
4.3.2 Procedure . 4
4.4 Rotating shock bin test . 4
4.4.1 General . 4
4.4.2 Apparatus . 4
4.4.3 Procedure . 4
4.4.4 Evaluation . . 4
4.5 Tensile strength of seams . 5
4.6 Fuel resistance test . 5
4.7 Buoyancy test . 5
4.7.1 Principle . 5
4.7.2 Apparatus . 6
4.7.3 Procedure . 6
4.7.4 Results . 6
4.8 Suit strength test . 6
4.8.1 Principle . 6
4.8.2 Apparatus . 6
4.8.3 Procedure . 6
4.8.4 Results . 7
4.9 Lifting loop test . 7
4.9.1 Procedure . 7
4.9.2 Results . 8
4.10 Flammability test . 8
4.10.1 Principle . 8
4.10.2 Apparatus . 8
4.10.3 Sampling . 8
4.10.4 Procedure . 9
4.10.5 Evaluation . 9
4.11 Cleaning . 10
4.12 Human test subjects . 10
4.12.1 Instruction and selection . 10
4.12.2 Number and sizes of human test subjects . 10
4.12.3 Gender of human test subjects . 10
4.12.4 Fitness of human test subjects . 10
4.12.5 Dress of human test subjects. 11
4.12.6 Pass/fail criteria . 11
4.13 Leakage measurement. 11
4.13.1 Leakage measurement for jumping . 11
4.13.2 Water ingress measurement for swimming .12
4.14 Thermal test.12
4.14.1 Using a thermal manikin .12
4.14.2 Using human test subjects . 15
4.15 Ergonomic performance testing . 18
4.15.1 General . 18
4.15.2 Donning . 18
iii
ISO/DIS 15027-3:2023(E)
4.15.3 Walking . 19
4.15.4 Climbing . 19
4.15.5 Dexterity and mobility . 20
4.16 In-water performance and field of vision tests . 21
4.16.1 Jump test . 21
4.16.2 Secondary donning . . 21
4.16.3 Turning test . 21
4.16.4 Conspicuity . 21
4.1
...

FINAL DRAFT
International
Standard
ISO/TC 188/SC 1
Immersion suits —
Secretariat: AFNOR
Part 3:
Voting begins on:
2024-07-29
Test methods
Voting terminates on:
Combinaisons de protection thermique en cas d'immersion —
2024-09-23
Partie 3: Méthodes d'essai
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT,
WITH THEIR COMMENTS, NOTIFICATION OF ANY
RELEVANT PATENT RIGHTS OF WHICH THEY ARE AWARE
AND TO PROVIDE SUPPOR TING DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/CEN PARALLEL PROCESSING LOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE
TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL
TO BECOME STAN DARDS TO WHICH REFERENCE MAY BE
MADE IN NATIONAL REGULATIONS.
Reference number
FINAL DRAFT
International
Standard
ISO/TC 188/SC 1
Immersion suits —
Secretariat: AFNOR
Part 3:
Voting begins on:
Test methods
Voting terminates on:
Combinaisons de protection thermique en cas d'immersion —
Partie 3: Méthodes d'essai
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT,
WITH THEIR COMMENTS, NOTIFICATION OF ANY
RELEVANT PATENT RIGHTS OF WHICH THEY ARE AWARE
AND TO PROVIDE SUPPOR TING DOCUMENTATION.
© ISO 2024
IN ADDITION TO THEIR EVALUATION AS
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
LOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL
or ISO’s member body in the country of the requester.
TO BECOME STAN DARDS TO WHICH REFERENCE MAY BE
MADE IN NATIONAL REGULATIONS.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland Reference number
ii
Contents Page
Foreword .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Test methods . 2
4.1 General .2
4.2 Sampling .2
4.3 Temperature cycling test . .2
4.3.1 General .2
4.3.2 Procedure .2
4.4 Rotating shock bin test .3
4.4.1 General .3
4.4.2 Apparatus .3
4.4.3 Procedure .3
4.4.4 Evaluation . .3
4.5 Tensile strength of seams .4
4.6 Fuel resistance test .4
4.7 Buoyancy test .4
4.7.1 Principle .4
4.7.2 Apparatus .4
4.7.3 Procedure .4
4.7.4 Results .4
4.8 Suit strength test .5
4.8.1 Principle .5
4.8.2 Apparatus .5
4.8.3 Procedure .5
4.8.4 Results .6
4.9 Lifting loop test .6
4.9.1 Procedure .6
4.10 Results . .6
4.11 Flammability test .7
4.11.1 Principle .7
4.11.2 Apparatus .7
4.11.3 Sampling .7
4.11.4 Procedure .7
4.11.5 Evaluation . .8
4.12 Cleaning .8
4.13 Human test subjects .8
4.13.1 Instruction and selection .8
4.13.2 Number and sizes of human test subjects .9
4.13.3 Gender of human test subjects .9
4.13.4 Fitness of human test subjects .9
4.13.5 Dress of human test subjects.9
4.13.6 Pass/fail criteria .9
4.14 Water ingress measurement .10
4.14.1 Water ingress measurement for jumping.10
4.14.2 Water ingress measurement for swimming .10
4.15 Thermal test.11
4.15.1 General .11
4.15.2 Using a thermal manikin .11
4.15.3 Using human test subjects .14
4.16 Ergonomic performance testing .16
4.16.1 General .16
4.16.2 Donning .17

iii
4.16.3 Walking .18
4.16.4 Climbing .18
4.16.5 Dexterity and mobility .19
4.17 In-water performance and field of vision tests .19
4.17.1 Jump test .19
4.17.2 Secondary donning .
...

ISO/TC 188/SC 1
Secretariat: AFNOR
Third edition
Date: 2024-04-1207-09
Immersion suits —
Part 3:
Test methods
Combinaisons de protection thermique en cas d'immersion —
Partie 3: Méthodes d'essai
FDIS stage
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication
may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying,
or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO
at the address below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: + 41 22 749 01 11
E-mail: [e-mail]
Website: www.iso.org
Published in Switzerland
ii
Contents
Foreword . vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Test methods . 2
4.1 General . 2
4.2 Sampling . 3
4.3 Temperature cycling test . 3
4.3.1 General . 3
4.3.2 Procedure . 3
4.4 Rotating shock bin test . 3
4.4.1 General . 3
4.4.2 Apparatus . 3
4.4.3 Procedure . 4
4.4.4 Evaluation . 4
4.5 Tensile strength of seams . 5
4.6 Fuel resistance test . 5
4.7 Buoyancy test . 5
4.7.1 Principle . 5
4.7.2 Apparatus . 6
4.7.3 Procedure . 6
4.7.4 Results . 6
4.8 Suit strength test . 6
4.8.1 Principle . 6
4.8.2 Apparatus . 6
4.8.3 Procedure . 7
4.8.4 Results . 8
4.9 Lifting loop test . 8
4.9.1 Procedure . 8
4.10 Results . 9
4.11 Flammability test . 9
4.11.1 Principle . 9
4.11.2 Apparatus . 9
4.11.3 Sampling . 9
4.11.4 Procedure . 9
4.11.5 Evaluation . 10
4.12 Cleaning . 11
4.13 Human test subjects . 11
4.13.1 Instruction and selection . 11
4.13.2 Number and sizes of human test subjects . 11
4.13.3 Gender of human test subjects . 12
4.13.4 Fitness of human test subjects . 12
4.13.5 Dress of human test subjects . 13
4.13.6 Pass/fail criteria . 13
4.14 Water ingress measurement . 13
4.14.1 Water ingress measurement for jumping . 13
4.14.2 Water ingress measurement for swimming . 14
4.15 Thermal test . 14
4.15.1 General . 14
4.15.2 Using a thermal manikin . 14
iii
4.15.3 Using human test subjects . 17
4.16 Ergonomic performance testing . 20
4.16.1 General . 20
4.16.2 Donning . 20
4.16.3 Walking . 21
4.16.4 Climbing . 22
4.16.5 Dexterity and mobility . 22
4.17 In-water performance and field of vision tests . 23
4.17.1 Jump test . 23
4.17.2 Secondary donning . 23
4.17.3 Turning test . 23
4.17.4 Conspicuity . 24
4.17.5 Field of vision . 24
4.17.6 Swim and boarding test . 24
4.18 Helicopter transit suits . 25
4.18.1 Helicopter escape . 25
4.18.2 Buoyancy measurement . 25
Annex A (informative) Test results — Uncertainty of measurement . 26
Annex B (normative) Test protocol and checklist for manikin testing . 27
B.1 Test protocol for the laboratory thermal manikin . 27
B.1.1 Pre-test preparation . 27
B.1.2 Dressing . 27
B.1.3 Positioning and venting . 27
B.1.4 Water tank . 28
B.1.5 Air temperature sensor(s). 28
B.1.6 Water temperature sensor(s) . 28
B.1.7 Method of stirring water . 29
B.1.8 Conducting the test . 29
B.1.9 Post-test . 30
B.2 Checklist for test protocol for the laboratory thermal manikin . 31
B.2.1 Pre-test preparation . 31
B.2.2 Dressing . 31
B.2.3 Positioning and venting . 32
B.2.4 Water tank . 33
B.2.5 Air temperature sensor(s).
...