ISO 7010:2019/Amd 10:2025
(Amendment)Graphical symbols — Safety colours and safety signs — Registered safety signs — Amendment 10
Graphical symbols — Safety colours and safety signs — Registered safety signs — Amendment 10
Symboles graphiques — Couleurs de sécurité et signaux de sécurité — Signaux de sécurité enregistrés — Amendement 10
General Information
Relations
Buy Standard
Standards Content (Sample)
International
Standard
ISO 7010
Third edition
Graphical symbols — Safety colours
2019-07
and safety signs — Registered
safety signs
AMENDMENT 10
2025-08
AMENDMENT 10
Symboles graphiques — Couleurs de sécurité et signaux de
sécurité — Signaux de sécurité enregistrés
AMENDEMENT 10
Reference number
ISO 7010:2019/Amd.10:2025(en) © ISO 2025
ISO 7010:2019/Amd.10:2025(en)
© ISO 2025
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
ISO 7010:2019/Amd.10:2025(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO document should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent
rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a)
patent(s) which may be required to implement this document. However, implementers are cautioned that
this may not represent the latest information, which may be obtained from the patent database available at
www.iso.org/patents. ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO's adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 145, Graphical symbols, Subcommittee SC 2,
Safety identification, signs, shapes, symbols and colours.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
iii
ISO 7010:2019/Amd.10:2025(en)
Graphical symbols — Safety colours and safety signs —
Registered safety signs
AMENDMENT 10
IMPORTANT — The colours represented in the electronic file of this document can be neither viewed
on screen nor printed as true representations. For the purposes of colour matching, see ISO 3864-4,
which provides colorimetric and photometric properties together with, as a guideline, references
from colour order systems.
Add the following safety signs:
— E072: Safe anchorage point,
— E073: Emergency descent device,
— E074: Emergency rations,
— E075: Lifeguard,
— E076: Evacuation equipment,
— M068: Lock moving mechanical parts,
— M069: Tools must be tethered,
— M072: Use decontamination shower,
— P080: No access for unauthorized persons.
All safety signs are available on the ISO Online browsing platform at https:// www .iso .org/ obp/ ui.
ISO 7010:2019/Amd.10:2025(en)
Safety sign E072: Safe anchorage point
Reference No.
ISO 7010-E072
Referent
Safe anchorage point
Function
To indicate the location of a safe anchorage point
Image content
Hook, vertical line with a knob
Hazard
Not being able to locate a safe anchorage point
Human behaviour that is intended to be caused after understanding the safety sign's meaning
Being aware of the location of a safe anchorage point (for a descent device, rescue system or personal fall
protection system)
Additional information
Test data obtained according to ISO 9186-1 are not available. Consequently, a supplementary text sign
shall be used to increase comprehension except when the safety sign is supplemented by manuals,
instructions or training.
ISO 7010:2019/Amd.10:2025(en)
Safety sign E073: Emergency descent device
Reference No.
ISO 7010-E073
Referent
Emergency descent device
Function
To indicate the location of an emergency descent
device
Image content
Human figure leaning slightly to the right, wearing
body harness, one arm holding a line coming from
the top; arrow pointing downwards
Hazard
Not being able to locate an emergency descent device
Human behaviour that is intended to be caused after understanding the safety sign's meaning
Being aware of the location of an emergency descent device
Additional information
Test data obtained according to ISO 9186-1 are not available. Consequently, a supplementary text sign
shall be used to increase comprehension except when the safety sign is supplemented by manuals,
instructions or training.
...
International
Standard
ISO 7010
Third edition
Graphical symbols — Safety colours
2019-07
and safety signs — Registered
safety signs
AMENDMENT 10
AMENDMENT 10
Symboles graphiques — Couleurs de sécurité et signaux de
sécurité — Signaux de sécurité enregistrés
AMENDEMENT 10
PROOF/ÉPREUVE
Reference number
ISO 7010:2019/Amd.10:2025(en) © ISO 2025
ISO 7010:2019/Amd.10:2025(en)
© ISO 2025
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
PROOF/ÉPREUVE
ii
ISO 7010:2019/Amd.10:2025(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO document should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent
rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a)
patent(s) which may be required to implement this document. However, implementers are cautioned that
this may not represent the latest information, which may be obtained from the patent database available at
www.iso.org/patents. ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO's adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 145, Graphical symbols, Subcommittee SC 2,
Safety identification, signs, shapes, symbols and colours.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
PROOF/ÉPREUVE
iii
ISO 7010:2019/Amd.10:2025(en)
Graphical symbols — Safety colours and safety signs —
Registered safety signs
AMENDMENT 10
IMPORTANT — The colours represented in the electronic file of this document can be neither viewed
on screen nor printed as true representations. For the purposes of colour matching, see ISO 3864-4,
which provides colorimetric and photometric properties together with, as a guideline, references
from colour order systems.
Add the following safety signs:
— E072: Safe anchorage point,
— E073: Emergency descent device,
— E074: Emergency rations,
— E075: Lifeguard,
— E076: Evacuation equipment,
— M068: Lock moving mechanical parts,
— M069: Tools must be tethered,
— M072: Use decontamination shower,
— P080: No access for unauthorized persons.
All safety signs are available on the ISO Online browsing platform at https:// www .iso .org/ obp/ ui.
PROOF/ÉPREUVE
ISO 7010:2019/Amd.10:2025(en)
Safety sign E072: Safe anchorage point
Reference No.
ISO 7010-E072
Referent
Safe anchorage point
Function
To indicate the location of a safe anchorage point
Image content
Hook, vertical line with a knob
Hazard
Not being able to locate a safe anchorage point
Human behaviour that is intended to be caused after understanding the safety sign's meaning
Being aware of the location of a safe anchorage point (for a descent device, rescue system or personal fall
protection system)
Additional information
Test data obtained according to ISO 9186-1 are not available. Consequently, a supplementary text sign
shall be used to increase comprehension except when the safety sign is supplemented by manuals, in-
structions or training.
PROOF/ÉPREUVE
ISO 7010:2019/Amd.10:2025(en)
Safety sign E073: Emergency descent device
Reference No.
ISO 7010-E073
Referent
Emergency descent device
Function
To indicate the location of an emergency descent
device
Image content
Human figure leaning slightly to the right, wearing
body harness, one arm holding a line coming from
the top; arrow pointing downwards
Hazard
Not being able to locate an emergency descent device
Human behaviour that is intended to be caused after understanding the safety sign's meaning
Being aware of the location of an emergency descent device
Additional information
Test data obtained according to ISO 9186-1 are not available. Consequently, a supplementary text sign
shall be used to increase comprehension except when the safety sign is supplemented by manuals, in-
structions or training.
PROOF/ÉPREUVE
ISO 7
...
ISO 7010:2019/Amd .10:2025(Een)
Third edition
2025-05-29
Graphical symbols — Safety colours and safety signs — Registered safety signs
AMENDMENT 10
Symboles graphiques — Couleurs de sécurité et signaux de sécurité — Signaux de sécurité enregistrés
AMENDEMENT 10
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this
publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical,
including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can
be requested from either ISO at the address below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: + 41 22 749 01 11
E-mail: copyright@iso.org
Website: www.iso.orgwww.iso.org
Published in Switzerland
ii © ISO 2025 – All rights reserved
ISO 7010:2019/Amd .10:2025(Een)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO
collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO document should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directiveswww.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of
(a) patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed
patent rights in respect thereof. As of the date of publication of this document, ISO had not received notice
of (a) patent(s) which may be required to implement this document. However, implementers are
cautioned that this may not represent the latest information, which may be obtained from the patent
database available at www.iso.org/patents.www.iso.org/patents. ISO shall not be held responsible for
identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the World
Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see
www.iso.org/iso/foreword.htmlwww.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 145, Graphical symbols, Subcommittee
SC 2, Safety identification, signs, shapes, symbols and colours.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at
www.iso.org/members.htmlwww.iso.org/members.html.
© ISO 2025 – All rights
reserved
iii
ISO 7010:2019/Amd.10:2025(en)
Graphical symbols — Safety colours and safety signs — Registered
safety signs
AMENDMENT 10
AMENDMENT 10
IMPORTANT — The colours represented in the electronic file of this document can be neither viewed on
screen nor printed as true representations. For the purposes of colour matching, see ISO 3864-4, which
provides colorimetric and photometric properties together with, as a guideline, references from colour
order systems.
Add the following safety signs:
— E072: Safe anchorage point,
— E073: Emergency descent device,
— E074: Emergency rations,
— E075: Lifeguard,
— E076: Evacuation equipment,
— M068: Lock moving mechanical parts,
— M069: Tools must be tethered,
— M072: Use decontamination shower,
— P080: No access for unauthorized persons.
All safety signs are available on the ISO Online browsing platform at
https://www.iso.org/obp/uihttps://www.iso.org/obp/ui.
2 © ISO 2025 – All rights reserved
ISO 7010:2019/Amd .10:2025(Een)
Safety sign E072: Safe anchorage point
Refer ence No.
ISO 7010-E072
Refer ent
Safe anchorage point
F unction
To indicate the location of a safe anchorage point
Ima ge content
Hook, vertical line with a knob
Hazard
Not being able to locate a safe anchorage point
Human behaviour that is intended to be caused after understanding the safety sign's meaning
Being aware of the location of a safe anchorage point (for a descent device, rescue system or personal fall
protection system)
© ISO 2025 – All rights
reserved
Additional information
Test data obtained according to ISO 9186-1 are not available. Consequently, a supplementary text sign shall be
used to increase comprehension except when the safety sign is supplemented by manuals, instructions or
training.
4 © ISO 2025 – All rights reserved
ISO 7010:2019/Amd .10:2025(Een)
© ISO 2025 – All rights
reserved
Safety sign E073: Emergency descent device
Refer ence No.
ISO 7010-E073
Refer ent
Emergency descent device
F unction
To indicate the location of an emergency descent device
Ima ge content
Human figure leaning slightly to the right, wearing
body harness, one arm holding a line coming from the
top; arrow pointing downwards
Hazard
Not being able to locate an emergency descent device
Human behaviour that is intended to be caused after understanding the safety sign's meaning
Being aware of the location of an emergency descent device
Additional information
Test data obtained according to ISO 9186-1 are not available. Consequently, a supplementary text sign shall be
used to increase comprehension except when the safety sign is supplemented by manuals, instructions or
training.
6 © ISO 2025 – All rights reserved
ISO 7010:2019/Amd .10:2025(Een)
© ISO 2025 – All rights
reserved
Safety sign E074: Emergency rations
Refer ence No.
ISO 7010-E074
Refer ent
Emergency rations
F unction
To indicate the location of emergency rations
Ima ge content
Bottle, fork, spoon
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.