Organization and digitization of information about buildings and civil engineering works, including building information modelling (BIM) — Information management using building information modelling — Part 6: Health and safety information

Organisation et numérisation des informations relatives aux bâtiments et ouvrages de génie civil, y compris modélisation des informations de la construction (BIM) — Gestion de l’information par la modélisation des informations de la construction — Partie 6: Informations relatives à la santé et à la sécurité

General Information

Status
Not Published
Current Stage
5020 - FDIS ballot initiated: 2 months. Proof sent to secretariat
Start Date
02-Oct-2024
Completion Date
02-Oct-2024
Ref Project

Relations

Buy Standard

Draft
ISO/FDIS 19650-6 - Organization and digitization of information about buildings and civil engineering works, including building information modelling (BIM) — Information management using building information modelling — Part 6: Health and safety information Released:18. 09. 2024
English language
24 pages
sale 15% off
Preview
sale 15% off
Preview
Draft
REDLINE ISO/FDIS 19650-6 - Organization and digitization of information about buildings and civil engineering works, including building information modelling (BIM) — Information management using building information modelling — Part 6: Health and safety information Released:18. 09. 2024
English language
24 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


FINAL DRAFT
International
Standard
ISO/TC 59/SC 13
Organization and digitization of
Secretariat: SN
information about buildings and
Voting begins on:
civil engineering works, including
2024-10-02
building information modelling
Voting terminates on:
(BIM) — Information management
2024-11-27
using building information
modelling —
Part 6:
Health and safety information
Organisation et numérisation des informations relatives aux
bâtiments et ouvrages de génie civil, y compris modélisation des
informations de la construction (BIM) — Gestion de l’information
par la modélisation des informations de la construction —
Partie 6: Informations relatives à la santé et à la sécurité
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT,
WITH THEIR COMMENTS, NOTIFICATION OF ANY
RELEVANT PATENT RIGHTS OF WHICH THEY ARE AWARE
AND TO PROVIDE SUPPOR TING DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/CEN PARALLEL PROCESSING LOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE
TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL
TO BECOME STAN DARDS TO WHICH REFERENCE MAY BE
MADE IN NATIONAL REGULATIONS.
Reference number
FINAL DRAFT
International
Standard
ISO/TC 59/SC 13
Organization and digitization of
Secretariat: SN
information about buildings and
Voting begins on:
civil engineering works, including
building information modelling
Voting terminates on:
(BIM) — Information management
using building information
modelling —
Part 6:
Health and safety information
Organisation et numérisation des informations relatives aux
bâtiments et ouvrages de génie civil, y compris modélisation des
informations de la construction (BIM) — Gestion de l’information
par la modélisation des informations de la construction —
Partie 6: Informations relatives à la santé et à la sécurité
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT,
WITH THEIR COMMENTS, NOTIFICATION OF ANY
RELEVANT PATENT RIGHTS OF WHICH THEY ARE AWARE
AND TO PROVIDE SUPPOR TING DOCUMENTATION.
© ISO 2024
IN ADDITION TO THEIR EVALUATION AS
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/CEN PARALLEL PROCESSING
LOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL
or ISO’s member body in the country of the requester.
TO BECOME STAN DARDS TO WHICH REFERENCE MAY BE
MADE IN NATIONAL REGULATIONS.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland Reference number
ii
Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Health and safety information . 3
4.1 Objective.3
4.2 General requirements .3
4.2.1 Initiation .3
4.2.2 Types of health and safety risk .3
4.2.3 Context .3
4.2.4 Health and safety risk prioritization .3
4.2.5 Risk treatment .4
4.2.6 Incidents .4
4.3 Schema .4
4.3.1 Overview .4
4.3.2 Context sub-schema.5
4.3.3 Risk sub-schema .5
4.3.4 Incident sub-schema .7
4.3.5 Risk and incident treatment sub-schema .8
4.3.6 Properties .10
4.3.7 Categorization .10
4.3.8 Level of risk .10
4.4 Health and safety risk, risk treatment and incident identifiers .10
4.4.1 General .10
4.4.2 Context identifier .11
4.4.3 Risk, risk treatment and incident identifiers .11
4.5 Use of information .11
4.5.1 Generating information .11
4.5.2 Sharing information .11
4.5.3 Presenting information . 12
4.5.4 Using information . . 12
4.5.5 Generalizing information . 12
5 Information requirements .13
5.1 Organizational information requirements . 13
5.2 Asset information requirements . 13
5.3 Project information requirements . . 13
5.4 Exchange information requirements and process methods and procedures .14
5.4.1 General .14
5.4.2 Process methods and procedures .14
5.4.3 Information requirements .14
5.4.4 Supporting evidence . 15
5.4.5 Re-usable information . 15
5.5 Review of information deliverables . 15
6 Process . .15
6.1 Process overview . 15
6.2 Additional considerations for the information standard and information production
methods and procedures . 15
6.3 Provision of existing health and safety information . 15
6.4 Additional criteria for invitation to tender or request for service .16
6.5 Additional requirements for delivery team mobilization .16
6.6 Additional requirements for collaborative production of information .16

iii
Annex A (informative) Schema summary . 17
Annex B (informative) Example classification .18
Annex C (informative) Example metrics .20
Annex D (informative) IFC representation .22
Bibliography .24

iv
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical c
...


ISO/DISFDIS 19650-6:2023(E)
ISO/TC 59/SC 13
Secretariat: SN
Date: 2024-02-1209-18
Organization and digitization of information about buildings and civil
engineering works, including building information modelling
(BIM) — Information management using building information
modelling — Part 6: Health and safety information
Part 6:
Health and safety information
Organisation et numérisation des informations relatives aux bâtiments et ouvrages de génie civil, y compris
modélisation des informations de la construction (BIM) — Gestion de l’information par la modélisation des
informations de la construction —
Partie 6: Informations relatives à la santé et à la sécurité
FDIS stage
DRAFT INTERNATIONAL STANDARD ISO/DIS 19650-6:2023(E)

All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication
may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying,
or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO
at the address below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: + 41 22 749 01 11
Fax: + 41 22 749 09 47
E-mail: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ISO/DISFDIS 19650-6:2023(E2024(en)
Contents
Foreword . iv
Introduction . v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Health and safety information . 3
4.1 Objective . 3
4.2 General requirements . 3
4.3 Schema . 4
4.4 Health and safety risk, risk treatment and incident identifiers . 13
4.5 Use of information . 14
5 Information requirements . 16
5.1 Organizational information requirements . 16
5.2 Asset information requirements . 16
5.3 Project information requirements . 17
5.4 Exchange information requirements and process methods and procedures . 17
5.5 Review of information deliverables . 18
6 Process . 18
6.1 Process overview . 18
6.2 Additional considerations for the information standard and information production
methods and procedures . 19
6.3 Provision of existing health and safety information . 19
6.4 Additional criteria for invitation to tender or request for service . 19
6.5 Additional requirements for delivery team mobilization . 19
6.6 Additional requirements for collaborative production of information . 19
Annex A (informative) Schema summary . 21
Annex B (informative) Example classification . 22
Annex C (informative) Example metrics . 24
Annex D (informative) IFC representation . 27
Bibliography . 29

iii
ISO/DISFDIS 19650-6:2023(E2024(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types of
ISO document should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent rights
in respect thereof. As of the date of publication of this document, ISO had not received notice of (a) patent(s)
which may be required to implement this document. However, implementers are cautioned that this may not
represent the latest information, which may be obtained from the patent database available at
www.iso.org/patents. ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO's adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 59, Buildings and civil engineering works,
Subcommittee SC 13, Organization and digitalization of information about buildings and civil engineering
works, including building information modelling (BIM) , in collaboration with the European Committee for
Standardization (CEN) Technical Committee CEN/TC 442, Building Information Modelling (BIM), in
accordance with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement).
A list of all parts in the ISO 19650 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found atwww.iso.org/members.html.
4 © ISO 2023 – All rights reserved
iv
ISO/DISFDIS 19650-6:2023(E2024(en)
Introduction
At the heart of this document is the requirement to identify, record, use and share information on health and
safety risks which can result in harm to any person involved in the asset throughout its life. Information
captured can include any site-wide health and safety risks associated with location, previous use, or the site's
physical characteristics. ISO 31000 and ISO 45000 series45001 to ISO 45006 cover risk management and
occupational health and safety
Health and safety related tasks such as allocation, registration and treatment can be performed by any party.
They represent a specific opportunity for making improvements to asset management using the ISO 19650
series but also a challenge because health and safety information is a collective responsibility rather than a
deliverable by an individual appointed party.
The exchange and use of health and safety information is intended to support:
— — representation of the nature and characteristics of the works being undertaken, the site and the asset;
— — representation of health and safety risks, hazards and associated factors;
— — generalization, dissemination and re-use of health and safety knowledge and experience.
Health and safety information becomes meaningful when interpreted in the light of the history of events and
accidents associated such risk, and in the context of the immediate and underlying circumstances in which the
risk is identified. The schema provided within this document includes a structure for recording contextual
information and incidents. One important use of incident information is to link incidents to design factors, so
that designers can learn about how their designed assets perform in use.
Organizational information requirements developed by the appointing party can reflect the required
integration of health and safety as well as modelling and sharing of information across the supply chain. This
contextual information can include information to identify characteristics of location, product, systems,
element or plant or equipment, and scope of work activity to be carried out, which are associated as sources
of the health and safety risk. Health and safety risks can be linked where appropriate to risk treatments which
prioritize the production of inherently safer outcomes during the delivery and operational phases of an asset’s
life cycle. Prior to construction, health and safety risks can be progressively defined and linked to the context
in which the harm can occur. During the construction stage the health and safety information can be used to
identify, record, use and share barriers and controls to reduce health and safety risk.
During handover and close out of the project, the health and safety information can be used to ensure that the
project information model is used to update the asset information model. This information is handed over to
those who will be responsible to managefor managing and assessassessing health and safety risks during the
operational phase of the asset.
This document intends to support the use of health and safety and related information to:
— — provide a safer and healthier environment for end users as well as for design, construction, operation
and maintenance personnel;
— — mitigate the inherent health and safety risks and hazards across the asset life cycle;
— — result in improved health and safety performance, fewer incidents and associated impacts;
v
ISO/DISFDIS 19650-6:2023(E2024(en)
— — provide for clearer, more assured and relevant health and safety information to the ‘right people’ at
the ‘right time’;
— — increase construction and operational value.
6 © ISO 2023 – All rights reserved
vi
Organization and digitization of information about buildings and civil
engineering works, including building information modelling (BIM) —
Information management using building information modelling —
Part 6: Health and safety
Part 6:
Health and safety information
1 Scope
This document specifies concepts and principles for classifying, sharing and delivering health and safety
information collaboratively, to secure the economic, environmental and social benefits.
This document:
a) a) specifies requirements for the collaborative sharing of structured health and safety information
throughout project and asset life cycles;
b) b) supports the digitization of structured health and safety information in project and asset life cycles
progressively from the outset;
c) c) provides specification on how health and safety information is shared for use throughout project and
asset life cycle;
d) d) sets out a health and safety information cycle framework for the identification, use, sharing and
generalization of health and safety information through information management processes.
This document is applicable to individuals and organizations that contribute to and influence the
procurement, design, construction, use (including maintenance) and end-of-life of building and infrastructure
assets.
The principles and requirements of this document can be applied equally to delivery or in-use phases not
using BIM.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes
requirements of this document. For dated references, only the edition cited applies. For undated references,
the latest edition of the referenced document (including any amendments) applies.
ISO 19650-1:2018, Organiza
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.