This document specifies concepts and principles to establish a methodology for specifying level of information need and information deliveries in a consistent way when using building information modelling (BIM).
This document specifies the characteristics of different levels used for defining the detail and extent of information required to be exchanged and delivered throughout the life cycle of built assets. It gives guidelines for principles required to specify information needs.
The concepts and principles in this document can be applied for a general information exchange and while in progress, for a generally agreed way of information exchange between parties in a collaborative work process, as well as for an appointment with specified information delivery.
This document is applicable to the whole life cycle of any built asset, including strategic planning, initial design, engineering, development, documentation and construction, day-to-day operation, maintenance, refurbishment, repair and end-of-life.

  • Draft
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies concepts and principles to establish a methodology for specifying level of information need and information deliveries in a consistent way when using building information modelling (BIM). This document specifies the characteristics of different levels used for defining the detail and extent of information required to be exchanged and delivered throughout the life cycle of built assets. It gives guidelines for principles required to specify information needs. The concepts and principles in this document can be applied for a general information exchange and while in progress, for a generally agreed way of information exchange between parties in a collaborative work process, as well as for an appointment with specified information delivery. This document is applicable to the whole life cycle of any built asset, including strategic planning, initial design, engineering, development, documentation and construction, day-to-day operation, maintenance, refurbishment, repair and end-of-life.

  • Standard
    23 pages
    English language
    sale 15% off
  • Standard
    24 pages
    French language
    sale 15% off

This document specifies requirements for defining structure and content for library objects to support
project inception, brief, design, tendering, construction, operations, use and demolition, supporting the
development of information throughout the process, in connection with building information modelling
(BIM) and the organization of the objects into libraries.
This document does the following:
— Establishes requirements for defining template objects, generic objects and product objects in datadriven
library and design processes.
— Establishes requirements for graphical symbols and other graphic conventions for use on drawings for the
built environment, giving principles and definitions for the symbolic and simplified visual presentation
of objects. It also describes a rationale of symbolism which establishes rules for the design of graphical
symbols and other graphic conventions and gives recommendations for the application of those rules
and the ways in which symbolism should be used.
— Defines the purposes of characterizing the shape and measurement of library objects.
— Defines the purposes of specifying and assessing properties for library objects. It defines the information
appropriate for specific uses, including specification of the desired outcome (typically by designers and
engineers) and the selection of identified products (typically by contractors and subcontractors). It also
gives recommendations for the application of assemblies in integrated BIM working.
— Refers to the Industry Foundation Classes (IFC) schema as a common object model.
This document is applicable to all professionals and service providers who produce and use library
objects with generic and product-specific information. This group includes, but is not limited to, product
manufacturers and suppliers, library authors, designers and engineers, contractors, owners, maintainers
and commissioners.

  • Standard
    47 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document is applicable to construction processes where the usual surveyor’s control points are to be used not only for geometry control, but other applications such as laser scanning, localization of autonomous vehicles, photogrammetry, or VR/AR applications.
It provides a framework for making accurate survey point information available to digital applications and other trades. This includes the layout of markers, a naming convention for markers and a common digital interface for the read-out-data of markers.
The document builds on existing standards and conventions and collates them where applicable.
The document is intended to be used on construction sites and in existing buildings by planners (architects, civil engineers,…), surveyors, construction companies, software providers, UXV operators, BIM stakeholders, and on site machines/devices/systems.
The survey point information may be utilised not only during the construction but also during maintenance throughout the life of the facility.

  • Technical report
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies requirements for defining structure and content for library objects to support project inception, brief, design, tendering, construction, operations, use and demolition, supporting the development of information throughout the process, in connection with building information modelling (BIM) and the organization of the objects into libraries.
This document does the following:
Establishes requirements for defining template objects, generic objects and product objects in data-driven library and design processes.
Establishes requirements for graphical symbols and other graphic conventions for use on drawings for the built environment, giving principles and definitions for the symbolic and simplified visual presentation of objects. It also describes a rationale of symbolism which establishes rules for the design of graphical symbols and other graphic conventions and gives recommendations for the application of those rules and the ways in which symbolism should be used.
Defines the purposes of characterizing the shape and measurement of library objects.
Defines the purposes of specifying and assessing properties for library objects. It defines the information appropriate for specific uses, including specification of the desired outcome (typically by designers and engineers) and the selection of identified products (typically by contractors and subcontractors). It also gives recommendations for the application of assemblies in integrated BIM working.
Refers to the Industry Foundation Classes (IFC) schema as a common object model.
This document is applicable to all professionals and service providers who produce and use library objects with generic and product-specific information. This group includes, but is not limited to, product manufacturers and suppliers, library authors, designers and engineers, contractors, owners, maintainers and commissioners.

  • Standard
    47 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies requirements for defining structure and content for library objects to support project inception, brief, design, tendering, construction, operations, use and demolition, supporting the development of information throughout the process, in connection with building information modelling (BIM) and the organization of the objects into libraries. This document does the following: Establishes requirements for defining template objects, generic objects and product objects in data-driven library and design processes. Establishes requirements for graphical symbols and other graphic conventions for use on drawings for the built environment, giving principles and definitions for the symbolic and simplified visual presentation of objects. It also describes a rationale of symbolism which establishes rules for the design of graphical symbols and other graphic conventions and gives recommendations for the application of those rules and the ways in which symbolism should be used. Defines the purposes of characterizing the shape and measurement of library objects. Defines the purposes of specifying and assessing properties for library objects. It defines the information appropriate for specific uses, including specification of the desired outcome (typically by designers and engineers) and the selection of identified products (typically by contractors and subcontractors). It also gives recommendations for the application of assemblies in integrated BIM working. Refers to the Industry Foundation Classes (IFC) schema as a common object model. This document is applicable to all professionals and service providers who produce and use library objects with generic and product-specific information. This group includes, but is not limited to, product manufacturers and suppliers, library authors, designers and engineers, contractors, owners, maintainers and commissioners.

  • Standard
    37 pages
    English language
    sale 15% off
  • Standard
    40 pages
    French language
    sale 15% off

The digital transformation of the construction industry includes also the digital transformation of the supply chaine of construction products. With EN ISO 16739-1 exists an open language to design, transfer and maintain construction models. The construction models (e.g. of a building) contain a digital twin of real-life products. The data of these products should be transported in a digital format on the way from the factory to the building owner.
This product data should be expressed also in an easy and open way. The creators of product data files should be able to do this manually or automatically, as they like it. The users of product data should be able to use it to:
•   Express their requirements related to products
•   Describe configurable products
•   Import product data easily in the BIM models at any stage of the project (design, construction, operation)
•   Export product data easily from the BIM models at any stage of the project (design, construction, operation)
These scenarios fit in the business models of manufacturers, planners, construction companies and facility managers.
The working group 4 of CEN-TC442 has published proposals for creating new work items in the sector of CEN regarding the storage and the transport of product data in the sector of building information modelling (BIM):
EN ISO 16739-1:2018: Industry Foundation Classes (IFC) for data sharing in the construction and facility management industries- Part 1: Data schema
EN ISO 12006-3: Building construction – Organization of information about construction works – Part 3: Framework for object-oriented information
prEN ISO 23386: Building information modelling and other digital processes used in Construction – Methodology to describe, author and maintain properties in interconnected dictionaries
prEN ISO 23387: Data templates for construction works entities, Part 1:  Objects, collections, and relationships defining the general structure of data templates
This standard defines a format to negotiate product data templates, express requirements and describe configurable products and therefore fills the missing link between the product data sources (e.g. catalogs) from the manufacturers and the BIM models of the designers, builders, and owners.

  • Standard
    212 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This part of ISO 29481 Information Delivery Manual (IDM) specifies:
• a data schema for exchanging the data required in specific data exchange scenarios during the building lifecycle in the
extensible markup language (XML) schema format.
• a classification system for IDM specifications.
This part of ISO 29481 is intended to facilitate interoperability and reusability of IDM specifications. It promotes digital collaboration
between actors in the construction process and provides a basis for accurate, reliable, repeatable and high-quality information
exchange.

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day

ISO 19650 part 4 provides detailed process and criteria for the decision points in the process of executing an information exchange within information management as defined by ISO 19650. It promotes a sustainable approach to information exchange where the immediate delivery of information does not preclude its future use.    
It is applicable to any information exchange within project stages (ISO 19650 part 2) and within in-use events (ISO 19650 part 3).  All development and information exchanges should be executed under the appropriate security controls (ISO 19650 part 5).
It supports the satisfaction of a specific EIR/AIR related to an individual information exchange of any type of information by enumerating criteria relating to completeness, compliance to formal exchange schemas, the continuity of concepts between exchanges and the elimination of spatial and specification conflicts

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document discusses an integrated and unified approach for data aspects, specifically for assets in the built environment, using EIF terminology.
The following data architecture (Figure 1) applies within each category.
Figure 1 - Data architecture with typology (grey areas indicating the scope of this document)
...
This document specifies:
-   a generic Top Level "M1: Data model" as common form;
-   a conceptual "L1: Data language" as common meta-model with four ‘linked data’-based concrete language bindings (SKOS, RDFS, OWL and SHACL), including:
-   a choice of RDF-based formats (to be used for all modelling and language levels);
-   a set of data modelling patterns (for identification, naming, handling of enumeration types, quantity modelling, asset decomposition, grouping, etc.).
-   a linking approach for interlinking data sets, interlinking data models and linking data sets and data models which are relevant within the built environment from many perspectives such as:
-   Building information modelling (BIM);
-   Geo-spatial information systems (GIS);
-   Systems engineering (SE)  );
-   Monitoring & control (M&C);
-   Electronic document management (EDM).
This document does not specify a knowledge model since this is already available in ISO 12006-3.
This document does not specify a meta-‘data language’ since this is already provided by the concrete RDF language bindings (being RDFS).
The scope of this document in general excludes the following:
-   Business process modelling;
-   Software implementation aspects;
-   Data packaging and transportation/transaction aspects (handled by ISO TC59/SC13 Information container for document delivery (ICDD) respectively various information delivery manual (IDM) / information exchange requirements (EIR)-related initiatives);
-   Domain-specific (here: built environment-specific) content modelling in the form of concepts, attributes and relations at end-user level (the actual ontologies themselves) beyond a generic upper ontology and modelling patterns.

  • Standard
    97 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document establishes a framework for providing specifications for the internal commissioning and implementation of building information modelling (BIM) during both delivery and operational phases. It identifies a structured approach so as to encourage clarity during development, management and checking processes for use by organizations that develop and apply these specifications. This document does not provide specific content but it does provide examples. It is applicable to buildings, infrastructure, facilities and managed landscapes, of any size or complexity.

  • Standard
    22 pages
    English language
    sale 15% off

This document is the technical addition to the methodology set out in ISO 29481-1. It defines a specification to store, exchange and read information delivery manual (IDM) specifications in a standardized and machine-readable way.

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies a language-independent information model which can be used for the
development of dictionaries used to store or provide information about construction works. The model
is extended by instantiating content, such as further objects and their relationships, allowing the
content to serve as an ontology, taxonomy, meronomy, lexicon and thesaurus.
NOTE 1 Lexicons are resources for comprising lexical entries for a given language
NOTE 2 Meronomies are type of hierarchies which deals with part-whole relationships
NOTE 3 Ontologies are formal, explicit specification of a shared conceptualizationIt enables classification
systems, information models, object models, data templates and process models to be cross-referenced from
within a common framework.
This document provides the description of an API allowing the interconnection of data dictionaries as
described in ISO 23386.

  • Standard
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies the detailed process and criteria for decision makings when executing an information exchange as specified by the ISO 19650 series to ensure the quality of the resulting project information model or asset information model. It details the implementation of the concepts in ISO 19650-1 and is applicable to any information exchange within the delivery stages covered by ISO 19650-2 and operational trigger events covered by ISO 19650-3.
This document is applicable to assets of all sizes and all levels of complexity. This includes portfolios of buildings, campuses, infrastructure networks, individual buildings and pieces of infrastructure. The requirements in this document should be applied in a way that is appropriate to the scale and complexity of the asset. This document makes use of the phrase “shall consider”. This phrase is used to introduce a list of items that the person in question is required to think about carefully in connection with the primary requirement described in the subclause. The amount of thought involved, the time taken to complete it, and the need for supporting evidence depend on the complexity of the asset, the experience of the person(s) involved, and the requirements of any national policy on introducing building information modelling. On a relatively small or straightforward asset, it can be possible to complete, or dismiss as not relevant, some of these “shall consider” items very quickly. One way to help identify which of the “shall consider” statements are relevant can be to review each statement and create templates for assets of different sizes and complexity.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document is the technical addition to the methodology set out in ISO 29481-1. It defines a specification to store, exchange and read information delivery manual (IDM) specifications in a standardized and machine-readable way.

  • Standard
    30 pages
    English language
    sale 15% off
  • Standard
    31 pages
    French language
    sale 15% off

This document specifies the detailed process and criteria for decision makings when executing an information exchange as specified by the ISO 19650 series to ensure the quality of the resulting project information model or asset information model. It details the implementation of the concepts in ISO 19650-1 and is applicable to any information exchange within the delivery stages covered by ISO 19650-2 and operational trigger events covered by ISO 19650-3. This document is applicable to assets of all sizes and all levels of complexity. This includes portfolios of buildings, campuses, infrastructure networks, individual buildings and pieces of infrastructure. The requirements in this document should be applied in a way that is appropriate to the scale and complexity of the asset. This document makes use of the phrase “shall consider”. This phrase is used to introduce a list of items that the person in question is required to think about carefully in connection with the primary requirement described in the subclause. The amount of thought involved, the time taken to complete it, and the need for supporting evidence depend on the complexity of the asset, the experience of the person(s) involved, and the requirements of any national policy on introducing building information modelling. On a relatively small or straightforward asset, it can be possible to complete, or dismiss as not relevant, some of these “shall consider” items very quickly. One way to help identify which of the “shall consider” statements are relevant can be to review each statement and create templates for assets of different sizes and complexity.

  • Standard
    12 pages
    English language
    sale 15% off
  • Standard
    13 pages
    French language
    sale 15% off

This document specifies a language-independent information model which can be used for the development of dictionaries used to store or provide information about construction works. The model is extended by instantiating content, such as further objects and their relationships, allowing the content to serve as an ontology, taxonomy, meronomy, lexicon and thesaurus.
NOTE 1    Lexicons are resources for comprising lexical entries for a given language
NOTE 2    Meronomies are type of hierarchies which deals with part-whole relationships
NOTE 3    Ontologies are formal, explicit specification of a shared conceptualizationIt enables classification systems, information models, object models, data templates and process models to be cross-referenced from within a common framework.
This document provides the description of an API allowing the interconnection of data dictionaries as described in ISO 23386.

  • Standard
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies a language-independent information model which can be used for the development of dictionaries used to store or provide information about construction works. The model is extended by instantiating content, such as further objects and their relationships, allowing the content to serve as an ontology, taxonomy, meronomy, lexicon and thesaurus. NOTE 1 Lexicons are resources for comprising lexical entries for a given language NOTE 2 Meronomies are type of hierarchies which deals with part-whole relationships NOTE 3 Ontologies are formal, explicit specification of a shared conceptualizationIt enables classification systems, information models, object models, data templates and process models to be cross-referenced from within a common framework. This document provides the description of an API allowing the interconnection of data dictionaries as described in ISO 23386.

  • Standard
    43 pages
    English language
    sale 15% off
  • Standard
    58 pages
    French language
    sale 15% off

This document provides a guidance on how to develop an Information Delivery Manual (IDM) in compliance with EN ISO 29481-1 hereafter referred to as the "IDM standard". This document explains the core components and development process of the IDM methodology in non-technical terms. This guidance aims to help users and software vendors understand and utilise the IDM standard in defining information requirements and deliverables.
The technical implementation of IDM in a data model, Model View Definition 1) (MVD), is excluded from this guideline’s scope. IDM standard introduces the MVD concept but does not specify it in detail.
This guidance also utilises some transaction framework concepts introduced in EN ISO 29481-2. The technical XML- and XSD-schema definitions supporting the software solutions are excluded from this guidance.
1) An MVD defines a data model or a subset of an existing data model that is necessary to support one or many specific data exchange requirements. MVDs are used in software development and should have a machine-readable representation. An MVD that is dedicated to a single IDM can be used to filter information in software tools to a specific exchange requirement. [SOURCE: EN ISO 29481-1:2017, 5.6.4].
1.1   Background
This guideline primary reference is the IDM standard part 1 (EN ISO 29481-1:2017) (hereafter referred to as IDM standard). This guideline helps in understanding and using the IDM standard to describe information delivery. The guidance also uses some concepts described in part 2 of the IDM standard series (EN ISO 29481-2:2016). Considerable efforts have been made to align this guidance with the terminology and concepts introduced in EN ISO 19650-1 and EN ISO 19650-2.
Information Delivery Manual specification (hereafter referred to as the IDM specification) provides help in getting the full benefit from building information modelling (BIM). When the required information is available in the BIM to support a construction process or use case, and the quality of information is satisfactory, the process itself is much improved. The IDM standard provides a method to create the specification.
A complete IDM specification should support two perspectives: user requirements and technical solutions. User requirements describe the needed information delivery and the overall process in which information exchange occurs. The technical solution defines an exchange requirement model using a harmonised data schema.
EN ISO 29481-1 provides a methodology and a harmonised format to specify information requirements. It offers a framework and method to determine the needed information delivery with process maps and exchange requirements.
EN ISO 29481-2 specifies an interaction framework and format to describe "coordination acts" between actors or parties within an appointment. It facilitates interoperability between software applications used in the construction process to promote digital collaboration between actors in the building construction process. Also, it provides a basis for accurate, reliable, repeatable, and high-quality information exchange.
1.2   Users of this guidance document
This guidance document is intended for clients, architects, engineers, contractors, surveyors, authorities, and other parties who need to specify or implement information delivery. Originally, the IDM standard was focused on defining BIM deliverables, but the possible application of the standard is much broader. It can be used to specify any requirement for information delivery.
Although software developers and technology adapters are not the primary audiences of this guidance document, it may help them better understand existing IDMs and develop their own IDMs.
1.3   Relation to EN ISO 19650
The IDM standard is a process-oriented methodology used to describe the information exchange requirements for a particular purpose which may complement the information-management approach outlined in the EN ISO 19650 series...

  • Technical report
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document provides guidance on how to develop an information delivery manual (IDM) in compliance with EN ISO 29481-1 hereafter referred to as the “IDM standard”. This document explains the core components and development process of the IDM methodology in non-technical terms. This document aims to help users and software vendors understand and utilize the IDM standard in defining information requirements and deliverables.
The technical implementation of IDM in a data model, model view definition  (MVD), is excluded from this document’s scope. IDM standard introduces the MVD concept but does not specify it in detail.
This document also utilizes some transaction framework concepts introduced in EN ISO 29481-2. The technical XML- and XSD-schema definitions supporting the software solutions are excluded from this document.

  • Technical report
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day

BIM Execution Plans (BEP) and Exchange Information requirements (EIR) are central complementary documents for the definition of information requirements and how to process them in collaborative BIM environments.
Where EIR defines the Exchange information requirements of an appointing party and BEP – the BIM execution Plan – is the plan how to fulfill these requirements by the appointed parties.
This work item will
•   examine and explain the demands for Exchange Information Requirements (EIR) and BIM execution Plans (BEP) based on EN/ISO 19650-1 and -2.
•   Provide guidance for the implementation of EIR and BEP
•   Provide templates for the creation of EIR and BEP

  • Technical report
    55 pages
    English language
    sale 10% off
    e-Library read for
    1 day

2021-07-14 - TC origine - Update of unit for "Eutrophication aquatic freshwater" in Tables 3 and C.1

  • Corrigendum
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document deals with the processes involved in the procurement and delivery of information to planning and construction projects, specifically with exchange information requirement (EIR) and BIM execution plan (BEP), considering the administrative processes. This document takes into account international standards and specifications as well as recommended practice.
This document is relevant for all parties involved in the tendering of information deliverables. Including both those that require and those that deliver the information. The required information can be relevant for all processes in the life cycle such as design, construction, operation and maintenance and end-of-life processes. It applies above all to e.g. client, asset owners/operators, architects, engineer, contractors, subcontractors etc.
This document provides methodology to appointing parties on how to require and agree the right amount, quality and level of information needs.
It is also important for appointed parties to be able to assess the quality of existing EIRs and identify possible over-specification or gaps. Based on this, it is possible to estimate and calculate the necessary effort for data creation.
This document operationalizes the tendering and appointment process of information deliverables as specified in EN ISO 19650-2:2018. This document does not cover all clauses of EN ISO 19650-2:2018. Its main goal is to provide template examples and guidance for all activities conditioning specification of requirements and deliverables in the production of exchange information requirements and BIM execution plan. Specifically, it covers the “shall” and “shall consider” requirements in EN ISO 19650-2:2018, 5.2.1 (EIR), 5.3.2 (pre-appointment BEP) and 5.4.1 (confirmed BEP). For specification of Scope and out of scope see Table 1 (see Annex A for which part of EN ISO 19650-2:2018 is supported by templates).

  • Technical report
    55 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document contains the terms and definitions of general concepts to establish a vocabulary applicable to buildings and civil engineering works.
It comprises:
a) fundamental concepts, which can be the starting point for other, more specific, definitions;
b) more specific concepts, used in several areas of construction and frequently used in standards, regulations and contracts.

  • Standard
    6 pages
    English language
    sale 15% off
  • Standard
    171 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    307 pages
    English and Russian language
    sale 15% off

This document provides the opportunity to add information about the contents of a container by further specializing the generic types of links specified in ISO 21597-1. The defined link types have been chosen to enhance the use of the container by allowing the addition of semantic relationships that are human interpretable to provide greater clarity about those links.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document provides terms and definitions for facility management in relation to buildings and civil engineering works. These terms and definitions reflect standardized terminology relevant to construction works needed by those having a responsibility for facility management.

  • Standard
    25 pages
    English language
    sale 15% off
  • Standard
    25 pages
    English language
    sale 15% off

This document specifies requirements for information management, in the form of a management process, within the context of the operational phase of assets and the exchanges of information within it, using building information modelling.
This document can be applied to all types of assets and by organizations of all types and sizes involved in the operational phase of assets.
The requirements in this document can be achieved through direct actions carried out by the organization in question or can be delegated to another party.

  • Standard
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document sets out the principles and structure for data templates for construction objects. It is developed to support digital processes using machine-readable formats using a standard data structure to exchange information about any type of construction object, e.g. product, system, assembly, space, building etc., used in the inception, brief, design, production, operation and demolition of facilities.
This document provides the specification of a taxonomy model that defines concepts from ISO 12006-3:2007, i.e. objects, collections and relationships between them, to support the information need for the specific purpose of the data template.
This document provides an EXPRESS specification with extensions of the EXPRESS-G notation and specification from ISO 12006-3:2007. These extensions have been provided to support market needs developed since the publication of ISO 12006-3 in 2007.
This document provides the rules for linking between data templates and IFC classes within a data dictionary based on ISO 12006-3:2007.
This document provides the rules for linking between data templates and classification systems within a data dictionary based on ISO 12006-3:2007.
The target audience of this document is software developers and not construction industry domain experts appointed to create data templates based on sources describing information needs.
It is not in the scope of this document to provide the content of any data templates. The data structure provided is intended to be used for developing specific data templates based on standards developed in ISO/IEC, CEN/CENELEC, national standardization organizations, or other sources describing information needs.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies the principles and requirements for security-minded information management at a stage of maturity described as "building information modelling (BIM) according to the ISO 19650 series", and as defined in ISO 19650-1, as well as the security-minded management of sensitive information that is obtained, created, processed and stored as part of, or in relation to, any other initiative, project, asset, product or service.
It addresses the steps required to create and cultivate an appropriate and proportionate security mindset and culture across organizations with access to sensitive information, including the need to monitor and audit compliance.
The approach outlined is applicable throughout the lifecycle of an initiative, project, asset, product or service, whether planned or existing, where sensitive information is obtained, created, processed and/or stored.
This document is intended for use by any organization involved in the use of information management and technologies in the creation, design, construction, manufacture, operation, management, modification, improvement, demolition and/or recycling of assets or products, as well as the provision of services, within the built environment. It will also be of interest and relevance to those organizations wishing to protect their commercial information, personal information and intellectual property.

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document provides the opportunity to add information about the contents of a container by further
specializing the generic types of links specified in ISO 21597-1. The defined link types have been chosen
to enhance the use of the container by allowing the addition of semantic relationships that are human
interpretable to provide greater clarity about those links.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document provides the opportunity to add information about the contents of a container by further specializing the generic types of links specified in ISO 21597-1. The defined link types have been chosen to enhance the use of the container by allowing the addition of semantic relationships that are human interpretable to provide greater clarity about those links.

  • Standard
    21 pages
    English language
    sale 15% off
  • Standard
    21 pages
    English language
    sale 15% off
  • Standard
    21 pages
    French language
    sale 15% off
  • Standard
    21 pages
    French language
    sale 15% off

This document defines an open and stable container format to exchange files of a heterogeneous nature to deliver, store and archive documents that describe an asset throughout its entire lifecycle.
It is suitable for all parties dealing with information concerning the built environment, where there is a need to exchange multiple documents and their interrelationships, either as part of the process or as contracted deliverables. The format is intended to use resources either included in the container (such as documents) or referenced remotely (such as web resources). A key feature is that the container can include information about the relationships between the documents. Relevant use-cases reflect the need for information exchange during the entire life cycle of any built asset and can include, but are not limited to, the handover of
- a published bidding package,
- required project deliverables at a specific project stage (e.g. when proposing different design scenarios),
- shared information as background or for further development,
- published approval packages, or
- information about versions between partners to provide a means to reference particular states of the information and track changes.

  • Standard
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day

The scope of this guidance is deliberately restricted only to refer to EN ISO 19650-1 and -2, highlighting and describing the manner in which to use it -and not extending or contradicting the scope and content of the standard  The document aims simply to provide minimum supporting text to achieve a basic understanding and ability to implement EN ISO 19650-1 and -2. In each country, each client, each team can use this guidance to provide the best response to information management in each project.  
This document explains the terms and definitions, explains the concepts and principles and how to use them, and gives typical examples with clear explanations.
It should be noted that in this guidance, Information Management is considered as a part of the Project Management.
This guidance is intended to demonstrate how the standard works at European level, which is neutral, agnostic, and applicable to any of the following circumstances:
-   the nature of contracts: e. g. public; private, alliances, global, partnership,
-   the actors' functions: e. g. through the programming, design, construction phases, from small agencies, SMEs to large firms, large companies,
-   the types of works: e. g. simple, complex, new, rehabilitated, housing, infrastructure.

  • Technical report
    63 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This International standard sets out the concepts, principles and the general structure for product data templates for products used in construction works. This general structure can be used to describe any product, e.g. in the domains of construction products, mechanical products, electrical products, plumbing products, and HVAC products.
This standard gives the specification of a taxonomy model based on ISO 12006-3 Building construction -- Organization of information about construction works -- Part 3: Framework for object-oriented information, that provides a methodology for creating concepts, grouping concepts, and defining relationships between concepts. Concepts defined in this standard are representing reference documents, product types, properties, property sets, quantities, units and values, with relationships between the concepts to provide the formal description of the product type as well as its typical behavior. This structure of concepts and relationships forms the basis for a product data template.
This standard describes how product data templates shall be linked to IFC classes according EN ISO 16739 - Industry Foundation Classes (IFC) for data sharing in the construction and facility management industries, by describing the general rule for creating relations between xtdsubject and xtdproperty with Ifc entities and Ifc properties in a data dictionary based on EN ISO 12006-3 Building construction -- Organization of information about construction works -- Part 3: Framework for object-oriented information.
This standard describes the general product data template structure that shall be used for developing specific product data templates based on domain and/or specific areas such as standards developed in ISO/IEC, CEN/CENELEC, ASTM, ANSI, etc.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This proposed ISO standard will specify requirements for the security-minded management of projects utilizing digital technologies, associated control systems, for example building management systems, digital built environments and smart asset management. It outlines security threats to information during asset:.
• conception, strategy and briefing;
• procurement;
• design;
• construction;
• commissioning and handover;
• operation and maintenance;
• performance management;
• change of use/modification; and
• disposal/demolition.
It will explain the need for, and application of,trustworthiness and security controls throughout a built asset’s lifecycle (including the full project lifecycle) to deliver a holistic approach encompassing:
• safety;
• authenticity;
• availability (including reliability);
• confidentiality;
• integrity;
• possession;
• resilience; and
• utility.
The standard will address the steps required to create and cultivate an appropriate safety and security mindset and culture across many partners, including the need to monitor and audit compliance.
It will provide a foundation to support the evolution of future digital built environments, for example intelligent buildings, infrastructure and smart cities, but does not detail technical architectures for their implementation. While the processes contained within it may be applicable to other data management systems, this PAS does not specifically address issues relating to these systems.

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This new Standard will specify requirements for information management in relation to the operation and maintenance of assets (buildings and infrastructure)
It will cover the information management processes to:
a)    establish an asset breakdown structure and data dictionary;
b)    establish and fulfil the organization’s requirements for information throughout the operational phase of an asset and for operational information throughout the delivery phase of an asset;
c)    create an asset information model (AIM) for an existing asset or portfolio of assets;
d)    create an AIM from selected contents of a project information model (PIM) from a construction project;
e)    exchange asset information with appointed parties (service providers) during operation and maintenance activities, and also during construction projects.
f)    revise the AIM as the asset changes
g)    record information relating to the disposal, decommissioning or demolition of an asset;
h)    use the AIM to support organizational business processes; and
i)    hold the AIM as a resource for the organization.
NOTE 1 In developing and implementing these processes it is important to consider ISO 19650-5 and the need for adoption of appropriate and proportionate security-minded policies, processes and procedures to ensure that sensitive assets and data/information are afforded appropriate protection.
NOTE 2 References to information should be understood to cover both data and information relevant to both asset and facilities management.
This standard will be for use by organizations and individuals responsible for the operation, maintenance and strategic management of assets. It will also be of use to individuals involved in exchanging information from a PIM to and from an AIM. In addition, it will be of use to individuals involved in exchanging information throughout the life of an asset.
The standard will not cover detailed information content as this can only be defined in the information requirements which are developed by the organization. However, the standard will identify activities and documents which define information content.

  • Standard
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day

ISO 12006-2:2015 defines a framework for the development of built environment classification systems. It identifies a set of recommended classification table titles for a range of information object classes according to particular views, e.g. by form or function, supported by definitions. It shows how the object classes classified in each table are related, as a series of systems and sub-systems, e.g. in a building information model.
ISO 12006-2:2015 does not provide a complete operational classification system, nor does it provide the content of the tables, though it does give examples. It is intended for use by organizations which develop and publish such classification systems and tables, which may vary in detail to suit local needs. However, if this part of ISO 12006 is applied in the development of local classification systems and tables, then harmonization between them will be facilitated.
ISO 12006-2:2015 applies to the complete life cycle of construction works, including briefing, design, documentation, construction, operation and maintenance, and demolition. It applies to both building and civil engineering works, including associated engineering services and landscaping.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document provides an index of typical existing information on concept, disaster risk and countermeasure for resilience of buildings and civil engineering works.

  • Technical report
    27 pages
    English language
    sale 15% off
  • Technical report
    27 pages
    English language
    sale 15% off

This document contains the terms and definitions of general concepts to establish a vocabulary applicable to buildings and civil engineering works. It comprises: a) fundamental concepts, which can be the starting point for other, more specific, definitions; b) more specific concepts, used in several areas of construction and frequently used in standards, regulations and contracts.

  • Standard
    6 pages
    English language
    sale 15% off
  • Standard
    171 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    307 pages
    English and Russian language
    sale 15% off

This document specifies requirements for information management, in the form of a management process, within the context of the operational phase of assets and the exchanges of information within it, using building information modelling. This document can be applied to all types of assets and by organizations of all types and sizes involved in the operational phase of assets. The requirements in this document can be achieved through direct actions carried out by the organization in question or can be delegated to another party.

  • Standard
    30 pages
    English language
    sale 15% off
  • Standard
    30 pages
    English language
    sale 15% off
  • Standard
    33 pages
    French language
    sale 15% off
  • Standard
    33 pages
    French language
    sale 15% off

This document sets out the principles and structure for data templates for construction objects. It is developed to support digital processes using machine-readable formats using a standard data structure to exchange information about any type of construction object, e.g. product, system, assembly, space, building etc., used in the inception, brief, design, production, operation and demolition of facilities. This document provides the specification of a taxonomy model that defines concepts from ISO 12006-3:2007, i.e. objects, collections and relationships between them, to support the information need for the specific purpose of the data template. This document provides an EXPRESS specification with extensions of the EXPRESS-G notation and specification from ISO 12006-3:2007. These extensions have been provided to support market needs developed since the publication of ISO 12006-3 in 2007. This document provides the rules for linking between data templates and IFC classes within a data dictionary based on ISO 12006-3:2007. This document provides the rules for linking between data templates and classification systems within a data dictionary based on ISO 12006-3:2007. The target audience of this document is software developers and not construction industry domain experts appointed to create data templates based on sources describing information needs. It is not in the scope of this document to provide the content of any data templates. The data structure provided is intended to be used for developing specific data templates based on standards developed in ISO/IEC, CEN/CENELEC, national standardization organizations, or other sources describing information needs.

  • Standard
    17 pages
    English language
    sale 15% off
  • Standard
    17 pages
    English language
    sale 15% off
  • Standard
    17 pages
    French language
    sale 15% off
  • Standard
    17 pages
    French language
    sale 15% off

This Guide sets out the rules for the drafting and presentation of candidate harmonized European Standards (hENs) for construction products drafted in the framework of Regulation (EU) 305/2011 (Construction Products Regulation).
This Guide gives rules which are additional to the CEN-CENELEC Internal Regulations - Part 3 (based on ISO/IEC Directives, Part 2) when this is necessary because of the special provisions of harmonized product standards in the construction sector.
This Guide applies to all new candidate hENs and for new Work Items (WIs) revising/amending existent hENs.

  • Guide
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document defines an open and stable container format to exchange files of a heterogeneous nature
to deliver, store and archive documents that describe an asset throughout its entire lifecycle.
It is suitable for all parties dealing with information concerning the built environment, where there is
a need to exchange multiple documents and their interrelationships, either as part of the process or
as contracted deliverables. The format is intended to use resources either included in the container
(such as documents) or referenced remotely (such as web resources). A key feature is that the container
can include information about the relationships between the documents. Relevant use-cases reflect the
need for information exchange during the entire life cycle of any built asset and can include, but are not
limited to, the handover of
1. a published bidding package,
2. required project deliverables at a specific project stage (e.g. when proposing different design
scenarios),
3. shared information as background or for further development,
4. published approval packages, or
5. information about versions between partners to provide a means to reference particular states of
the information and track changes.

  • Standard
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day

The scope of this guidance is deliberately restricted only to refer to EN ISO 19650-1 and -2, highlighting and describing the manner in which to use it -and not extending or contradicting the scope and content of the standard  The document aims simply to provide minimum supporting text to achieve a basic understanding and ability to implement EN ISO 19650-1 and -2. In each country, each client, each team can use this guidance to provide the best response to information management in each project.  
This document explains the terms and definitions, explains the concepts and principles and how to use them, and gives typical examples with clear explanations.
It should be noted that in this guidance, Information Management is considered as a part of the Project Management.
This guidance is intended to demonstrate how the standard works at European level, which is neutral, agnostic, and applicable to any of the following circumstances:
-   the nature of contracts: e. g. public; private, alliances, global, partnership,
-   the actors' functions: e. g. through the programming, design, construction phases, from small agencies, SMEs to large firms, large companies,
-   the types of works: e. g. simple, complex, new, rehabilitated, housing, infrastructure.

  • Technical report
    63 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies the principles and requirements for security-minded information management at a stage of maturity described as "building information modelling (BIM) according to the ISO 19650 series", and as defined in ISO 19650-1, as well as the security-minded management of sensitive information that is obtained, created, processed and stored as part of, or in relation to, any other initiative, project, asset, product or service. It addresses the steps required to create and cultivate an appropriate and proportionate security mindset and culture across organizations with access to sensitive information, including the need to monitor and audit compliance. The approach outlined is applicable throughout the lifecycle of an initiative, project, asset, product or service, whether planned or existing, where sensitive information is obtained, created, processed and/or stored. This document is intended for use by any organization involved in the use of information management and technologies in the creation, design, construction, manufacture, operation, management, modification, improvement, demolition and/or recycling of assets or products, as well as the provision of services, within the built environment. It will also be of interest and relevance to those organizations wishing to protect their commercial information, personal information and intellectual property.

  • Standard
    28 pages
    English language
    sale 15% off
  • Standard
    28 pages
    English language
    sale 15% off
  • Standard
    29 pages
    French language
    sale 15% off
  • Standard
    29 pages
    French language
    sale 15% off

This European standard establishes the rules for defining properties used in construction and a methodology for authoring and maintaining them, for a confident and seamless digital share between stakeholders.
Regarding definition of properties, it provides:
•   rules of definitions of properties
•   definition of property’s attributes
Regarding authoring and maintaining process, it provides:
•   definition of request’s attributes
•   definition and role of experts;
•   a governance model through the establishment of steering committee;
•   management rules to interconnect dictionaries through properties mapping process.

  • Standard
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document defines an open and stable container format to exchange files of a heterogeneous nature to deliver, store and archive documents that describe an asset throughout its entire lifecycle. It is suitable for all parties dealing with information concerning the built environment, where there is a need to exchange multiple documents and their interrelationships, either as part of the process or as contracted deliverables. The format is intended to use resources either included in the container (such as documents) or referenced remotely (such as web resources). A key feature is that the container can include information about the relationships between the documents. Relevant use-cases reflect the need for information exchange during the entire life cycle of any built asset and can include, but are not limited to, the handover of - a published bidding package, - required project deliverables at a specific project stage (e.g. when proposing different design scenarios), - shared information as background or for further development, - published approval packages, or - information about versions between partners to provide a means to reference particular states of the information and track changes.

  • Standard
    41 pages
    English language
    sale 15% off
  • Standard
    41 pages
    English language
    sale 15% off
  • Standard
    42 pages
    French language
    sale 15% off
  • Standard
    42 pages
    French language
    sale 15% off

ISO 12006-2:2015 defines a framework for the development of built environment classification systems. It identifies a set of recommended classification table titles for a range of information object classes according to particular views, e.g. by form or function, supported by definitions. It shows how the object classes classified in each table are related, as a series of systems and sub-systems, e.g. in a building information model.
ISO 12006-2:2015 does not provide a complete operational classification system, nor does it provide the content of the tables, though it does give examples. It is intended for use by organizations which develop and publish such classification systems and tables, which may vary in detail to suit local needs. However, if this part of ISO 12006 is applied in the development of local classification systems and tables, then harmonization between them will be facilitated.
ISO 12006-2:2015 applies to the complete life cycle of construction works, including briefing, design, documentation, construction, operation and maintenance, and demolition. It applies to both building and civil engineering works, including associated engineering services and landscaping.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day

ISO 16757-2:2016 describes the modelling of building services product geometry. The description is optimized for the interchange of product catalogue data and includes
-      shapes for representing the product itself,
-      symbolic shapes for the visualization of the product's function in schematic diagrams,
-      spaces for functional requirements,
-      surfaces for visualization, and
-      ports to represent connectivity between different objects.
The shape and space geometry is expressed as Constructive Solid Geometry (CSG) based on geometric primitives concatenated to boundary representations by Boolean operations. ISO 16757-2:2016 uses the applicable primitives from ISO 10303‑42 and from ISO 16739 and adds primitives which are required for the special geometry of building services products. For symbolic shapes, line elements are also used.
ISO 16757-2:2016 neither describes the inner structure and internal functionality of the product nor the manufacturing information because this is typically not published within a product catalogue.
Building services products can have millions of variant dimensions. To avoid the exchange of millions of geometries, a parametric model is introduced which allows the derivation of variant-specific geometries from the generic model. This is necessary to reduce the data to be exchanged in a catalogue to a manageable size. The parametric model will result in smaller data files, which can be easier transmitted during data exchanges.
The geometry model used does not contain any drawing information such as views, line styles or hatching.

  • Standard
    91 pages
    English language
    sale 10% off
    e-Library read for
    1 day

The primary purpose of ISO 16757 is the provision of data structures for electronic product catalogues to transmit building services product data automatically into models of building services software applications. This includes a meta model for the specification of product classes and their properties and a meta model for the product data which is exchanged in product catalogues. Product data has to follow the specifications for their product groups.
ISO 16757-1:2015 specifies
the underlying concepts,
a generic model specifying the available modelling elements and their relationships, and
a framework for the specification of the Content Parts by describing the elements which are to be provided by these Parts.

  • Standard
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day