ISO/IEC 23001-10:2015/FDAmd 1

Information technology — MPEG systems technologies — Part 10: Carriage of timed metadata metrics of media in ISO base media file format — Amendment 1: Carriage of spatial information

Technologies de l'information — Technologies des systèmes MPEG — Partie 10: Transport de métriques de métadonnées de temporisation de supports au format de fichier de support en base ISO — Amendement 1: Transport d'information spatiale

General Information

• Status: Withdrawn
• ICS: 35.040 - Information coding
• ICS: 35.040.40 - Coding of audio, video, multimedia and hypermedia information
• Technical Committee: ISO/IEC JTC 1/SC 29 - Coding of audio, picture, multimedia and hypermedia information
• Drafting Committee: ISO/IEC JTC 1/SC 29 - Coding of audio, picture, multimedia and hypermedia information
• Current Stage: 5098 - Project deleted
• Completion Date: 05-Feb-2019

Relations

• Amends: ISO/IEC 23001-10:2015 - Information technology — MPEG systems technologies — Part 10: Carriage of timed metadata metrics of media in ISO base media file format
• Effective Date: 28-Aug-2021

Standards Content (Sample)

FINAL
ISO/IEC
AMENDMENT
DRAFT
23001-10:2015
FDAM 1
ISO/IEC JTC 1/SC 29
Information technology — MPEG
Secretariat: JISC
systems technologies —
Voting begins
on: 2016-09-09
Part 10:
Voting terminates
Carriage of timed metadata metrics of
on: 2016-11-04
media in ISO base media file format
AMENDMENT 1: Carriage of special
information
Technologies de l’information — Technologies des systèmes MPEG —
Partie 10: Transport de métriques de métadonnées de temporisation
de supports au format de fichier de support en base ISO
AMENDEMENT 1: Transport d’information spéciale
RECIPIENTS OF THIS DRAFT ARE INVITED TO
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
Reference number
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/IEC 23001-10:2015/FDAM 1:2016(E)
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
©
NATIONAL REGULATIONS. ISO/IEC 2016

---------------------- Page: 1 ----------------------
ISO/IEC 23001-10:2015/FDAM 1:2016(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO/IEC 2016, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. [phone]
Fax [phone]
[e-mail]
www.iso.org
ii © ISO/IEC 2016 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/IEC 23001-10:2015/FDAM 1:2016(E)

Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are
members of ISO or IEC participate in the development of International Standards through technical
committees established by the respective organization to deal with particular fields of technical
activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international
organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the
work. In the field of information technology, ISO and IEC have established a joint technical committee,
ISO/IEC JTC 1.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for
the different types of document should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject
of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent
rights. Details of any patent rights identified during the development of the document will be in the
Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment,
as well as information about ISO’s adherence to the World Trade Organization (WTO) principles in the
Technical Barriers to Trade (TBT) see the following URL: www.iso.org/iso/foreword.html.
Amendment 1 to ISO/IEC 23001-10:2015 was prepared by Joint Technical Committee ISO/IEC JTC 1,
Information technology, Subcommittee SC 29, Coding of audio, picture, multimedia and hypermedia
information.
© ISO/IEC 2016 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO/IEC 23001-10:2015/FDAM 1:2016(E)
Information technology — MPEG systems technologies —
Part 10:
Carriage of timed metadata metrics of media in ISO base
media file format
AMENDMENT 1: Carriage of special information
Page 12
Add a new Clause 6
6 Carriage of coordinates
6.1 General
This document specifies the carriage of ROI coordinates in the ISO Base Media File Format using
metadata tracks. Different coordinate types and corresponding storage formats are identified by their
sample entry. This clause defines those coordinates.
The ROI metadata track shall be linked to the track it describes by means of a ‘cdsc’ (content describes)
track reference.
The ROI described by a sample in the ROI track indicates the position of the ROI in the video track with
...