ISO 11928-1:2000

Micrographics — Quality control of graphic COM recorders — Part 1: Characteristics of the test frames

This part of ISO 11928 specifies the characteristics of the test frames used for evaluating the image quality of microforms from graphic COM recorders. It applies to graphic COM recorders that are capable of producing both alphanumeric and graphic images output onto black-and-white films.

Micrographie — Contrôle de la qualité des imprimantes COM graphiques — Partie 1: Caractéristiques des cibles de contrôle

General Information

• Status: Published
• Publication Date: 05-Apr-2000
• ICS: 37.080 - Document imaging applications
• Technical Committee: ISO/TC 171 - Document management applications
• Drafting Committee: ISO/TC 171 - Document management applications
• Current Stage: 9093 - International Standard confirmed
• Completion Date: 12-Sep-2022

Relations

• Consolidated By: ISO 15874-1:2013 - Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 1: General
• Effective Date: 06-Jun-2022

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 11928-1
First edition
2000-04-01
Micrographics — Quality control of graphic
COM recorders —
Part 1:
Characteristics of the test frames
Micrographie — Contrôle de la qualité des imprimantes COM
graphiques —
Partie 1: Caractéristiques des cibles de contrôle
Reference number
ISO 11928-1:2000(E)
©
ISO 2000

---------------------- Page: 1 ----------------------
ISO 11928-1:2000(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not
be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this
file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this
area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters
were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event
that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2000
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic
or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body
in the country of the requester.
ISO copyright office
Case postale 56 � CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 734 10 79
E-mail [e-mail]
Web www.iso.ch
Printed in Switzerland
ii © ISO 2000 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 11928-1:2000(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO
member bodies). The work of preparing International Standards is normally carried out through ISO technical
committees. Each member body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, governmental and non-governmental, in
liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this part of ISO 11928 may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
International Standard ISO 11928-1 was prepared by Technical Committee ISO/TC 171, Document imaging
applications, Subcommittee SC 1, Quality.
ISO 11928 consists of the following parts, under the general title Micrographics — Quality control of graphic COM
recorders:
� Part 1: Characteristics of the test frames
� Part 2: Quality criteria and control
© ISO 2000 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO 11928-1:2000(E)
Introduction
This part of ISO 11928 has been prepared because increasing numbers of technical drawings are now produced
on COM, and, although their quality is usually reasonable, they are not always comparable with microfilm copies of
hard copy drawings. This can cause difficulty when both kinds of drawing are put into aperture cards and used in
systems designed to deal with microfilm copies of hard-copy-drawings.
This part of ISO 11928 has therefore been prepared to help users to establish procedures that should ensure that
the quality of COM-generated drawings is both acceptable in itself and comparable in quality with technical
drawings on conventional microfilm that complies with ISO 3272-1, ISO 3272-2 and ISO 3272-3.
iv © ISO 2000 – All rights reserved

---------------------- Page: 4 ----------------------
INTERNATIONAL STANDARD ISO 11928-1:2000(E)
Micrographics — Quality control of graphic COM recorders —
Part 1:
Characteristics of the test frames
1 Sco
...