ISO 4316:1977
(Main)Surface active agents — Determination of pH of aqueous solutions — Potentiometric method
Surface active agents — Determination of pH of aqueous solutions — Potentiometric method
The determination is carried out in the following way: Potentiometric measurement of the potential difference between a glass electrode and a reference electrode dipping in an aqueous solution of the sample. This method is only applicable when so indicated in the specific standard for each product.
Agents de surface — Détermination du pH des solutions aqueuses — Méthode potentiométrique
General Information
Buy Standard
Standards Content (Sample)
INTERNATIONAL STANDARD
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION l MEXJJYHAPOflHAfl OPI-AHM3AUMR no CTAHAAPTM3ALWki.ORGANlSATION INTERNATIONALE DE NORMALISATION
Determination of pH of aqueous
Surface active agents -
solutions - Potentiometric method
Agents de surface - Determination du pH des solutions aqueuses - Mthode potentiomkrique
First edition - 1977-08-01
Ref. No. ISO 4316-1977 (E)
UDC 661.185 : 543.257.1
Descriptors : surfactants, dissolved matter, Chemical analysis, determination of content, pH, potentiometric analysis.
Price based on 2 pages
FOREWORD
ISO (the International Organization for Standardization) is a worldwide federation
of national Standards institutes (ISO member bodies). The work of developing
International Standards is Garried out through ISO technical committees. Every
member body interested in a subject for which a technical committee has been set
up has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated
to the member bodies for approval before their acceptance as International
Standards by the ISO Council.
International Standard ISO 4316 was developed by Technicai Committee
ISO/TC 91, Surface active agents, and was circulated to the member bodies in
August 1975.
lt has been approved by the member bodies of the following countries :
Austral ia India Spain
Austria Iran Switzerland
Belgium I taly Thailand
Brazil Netherlands Turkey
United Kingdom
Canada New Zealand
Egypt, Arab Rep. of U.S.A.
Poland
France Portugal Yugoslavia
Germany Romania
Hungary South Africa, Rep. of
The member body o f the following country expressed disapproval of the document
on technical grounds
Japan
0 International Organkation for Standardkation, 1977 l
Printed in Switzerland
INTERNATIONAL STANDARD ISO 4316-1977 (EI
Surface active agents - Determination of pH of aqueous
Potentiometric method
solutions -
1 SCOPE AND FIELD OF APPLICATION 5.3 Electrode, calomelkaturated potassium chloride type.
This International Standard specifies a method for the
5.4 Combined electrode, as an alternative to the glass
determination of the pH of aqueous solutions of surface
electrode (5.2) and reference electrode (5.3).
active agents.
This method is applicable only if so indicated in the specific
6 SAMPLING
Standard for each product.
The laboratory Sample of the surface active agent shall be
prepared and stored according to the instructions given
2 REFERENCE
in ISO 607.
ISO 607, Surface active agents - Detergents - Methods of
Sample division. 1 )
7 PROCEDURE
3 PRINCIPLE 7.1 Test Portion
Potentiometric measurement of the potential differente Weigh, to the nearest 0,Ol
...
NORME INTERNATIONALE
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION .MEXoJYHAPOAHAJl OPI-AHW3ALUUI n0 CTAHAAPTW3AWW .ORGANISATION INTERNATIONALE DE NORMALISATION
Détermination du pH des solutions
Agents de surface -
aqueuses - Méthode potentiométrique
Determination of pH of aqueous solutions - Potentiometric method
Surface active agents -
Première édition - 1977-08-01
Réf. no : ISO 4316-1977 (F)
CDU 661.185 : 543257.1
analyse chimique, dosage, pH, méthode potentiométrique.
Descripteurs : agent de surface, produit en solution,
Prix basé sur 2 pages
AVANT-PROPOS
L’ISO (Organisation internationale de normalisation) est une fédération mondiale
d’organismes nationaux de normalisation (comités membres de I’ISO). L’élaboration
des Normes internationales est confiée aux comités techniques de I’ISO. Chaque
comité membre intéressé par une étude a le droit de faire partiedu comité technique
correspondant. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec I’ISO, participent également aux travaux.
Les projets de Normes internationales adoptés par les comités techniques sont
soumis aux comités membres pour approbation, avant leur acceptation comme
Normes internationales par le Conseil de I’ISO.
La Norme internationale ISO 4316 a été élaborée par le comité technique
ISO/TC 91, Agents de surface, et a été soumise aux comités membres en août 1975.
Les comités membres des pays suivants l’ont approuvée :
Afrique du Sud, Rép. d’ f rance Roumanie
Allemagne Hongrie Royaume-Uni
Australie Inde Suisse
Autriche Iran Thaïlande
Belgique Italie Turquie
Brésil Nouvelle-Zélande U.S.A.
Canada Pays-Bas Yougoslavie
Égypte, Rép. arabe d’ Pologne
Espagne Portugal
Le comité membre du pays suivant l’a désapprouvée pour des raisons techniques :
Japon
@ Organisation internationale de normalj~tion, 1977 a
I mprimé en Suisse
ISO 4316-1977 (F)
NORME INTERNATIONALE
Agents de surface - Détermination du pH des solutions
aqueuses - Méthode potentiométrique
5.3 Électrode au calomel - KCI saturé.
1 OBJET ET DOMAINE D’APPLICATION
La présente Norme internationale spécifie une méthode
5.4 Électrode combinée, pouvant remplacer l’électrode en
potentiométrique de détermination du pH des solutions
verre (5.2) et l’électrode de référence (5.3).
aqueuses d’agents de surface.
Cette méthode n’est applicable que si elle est prescrite
dans la norme particulière à chaque produit.
6 ÉCHANTILLONNAGE
2 RÉFÉRENCE
L’échantillon pour laboratoire d’agent de surface doit être
préparé et conservé selon les prescriptions de I’ISO 607.
ISO 607, Agents de surface - Détergents - Méthodes de
division d’un échan tillon. l)
7 MODE OPÉRATOIRE
3 PRINCIPE
Mesurage, à l’aide d’un dispositif potentiométrique, de la
7.1 Prise d’essai
différence de potentiel existant entre une électrode en verre
et une électrode de référence plongeant dans une solution
Peser, à 0,Ol g près, 10 g environ de l’échantillon pour
aqueuse d’agent de surface.
laboratoire.
...
NORME INTERNATIONALE
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION .MEXoJYHAPOAHAJl OPI-AHW3ALUUI n0 CTAHAAPTW3AWW .ORGANISATION INTERNATIONALE DE NORMALISATION
Détermination du pH des solutions
Agents de surface -
aqueuses - Méthode potentiométrique
Determination of pH of aqueous solutions - Potentiometric method
Surface active agents -
Première édition - 1977-08-01
Réf. no : ISO 4316-1977 (F)
CDU 661.185 : 543257.1
analyse chimique, dosage, pH, méthode potentiométrique.
Descripteurs : agent de surface, produit en solution,
Prix basé sur 2 pages
AVANT-PROPOS
L’ISO (Organisation internationale de normalisation) est une fédération mondiale
d’organismes nationaux de normalisation (comités membres de I’ISO). L’élaboration
des Normes internationales est confiée aux comités techniques de I’ISO. Chaque
comité membre intéressé par une étude a le droit de faire partiedu comité technique
correspondant. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec I’ISO, participent également aux travaux.
Les projets de Normes internationales adoptés par les comités techniques sont
soumis aux comités membres pour approbation, avant leur acceptation comme
Normes internationales par le Conseil de I’ISO.
La Norme internationale ISO 4316 a été élaborée par le comité technique
ISO/TC 91, Agents de surface, et a été soumise aux comités membres en août 1975.
Les comités membres des pays suivants l’ont approuvée :
Afrique du Sud, Rép. d’ f rance Roumanie
Allemagne Hongrie Royaume-Uni
Australie Inde Suisse
Autriche Iran Thaïlande
Belgique Italie Turquie
Brésil Nouvelle-Zélande U.S.A.
Canada Pays-Bas Yougoslavie
Égypte, Rép. arabe d’ Pologne
Espagne Portugal
Le comité membre du pays suivant l’a désapprouvée pour des raisons techniques :
Japon
@ Organisation internationale de normalj~tion, 1977 a
I mprimé en Suisse
ISO 4316-1977 (F)
NORME INTERNATIONALE
Agents de surface - Détermination du pH des solutions
aqueuses - Méthode potentiométrique
5.3 Électrode au calomel - KCI saturé.
1 OBJET ET DOMAINE D’APPLICATION
La présente Norme internationale spécifie une méthode
5.4 Électrode combinée, pouvant remplacer l’électrode en
potentiométrique de détermination du pH des solutions
verre (5.2) et l’électrode de référence (5.3).
aqueuses d’agents de surface.
Cette méthode n’est applicable que si elle est prescrite
dans la norme particulière à chaque produit.
6 ÉCHANTILLONNAGE
2 RÉFÉRENCE
L’échantillon pour laboratoire d’agent de surface doit être
préparé et conservé selon les prescriptions de I’ISO 607.
ISO 607, Agents de surface - Détergents - Méthodes de
division d’un échan tillon. l)
7 MODE OPÉRATOIRE
3 PRINCIPE
Mesurage, à l’aide d’un dispositif potentiométrique, de la
7.1 Prise d’essai
différence de potentiel existant entre une électrode en verre
et une électrode de référence plongeant dans une solution
Peser, à 0,Ol g près, 10 g environ de l’échantillon pour
aqueuse d’agent de surface.
laboratoire.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.