ISO/IEC 14496-5:2001/Amd 22:2009
(Amendment)Information technology — Coding of audio-visual objects — Part 5: Reference software — Amendment 22: Reference software for 3D Graphics Compression Model (3DGCM)
Information technology — Coding of audio-visual objects — Part 5: Reference software — Amendment 22: Reference software for 3D Graphics Compression Model (3DGCM)
Technologies de l'information — Codage des objets audiovisuels — Partie 5: Logiciel de référence — Amendement 22: Logiciel de référence pour modèle de compression graphique 3D (3DGCM)
General Information
Relations
Buy Standard
Standards Content (Sample)
INTERNATIONAL ISO/IEC
STANDARD 14496-5
Second edition
2001-12-15
AMENDMENT 22
2009-10-15
Information technology — Coding
of audio-visual objects —
Part 5:
Reference software
AMENDMENT 22: Reference software for
3D Graphics Compression Model (3DGCM)
Technologies de l'information — Codage des objets audiovisuels —
Partie 5: Logiciel de référence
AMENDEMENT 22: Logiciel de référence pour modèle de compression
graphique 3D (3DGCM)
Reference number
ISO/IEC 14496-5:2001/Amd.22:2009(E)
©
ISO/IEC 2009
---------------------- Page: 1 ----------------------
ISO/IEC 14496-5:2001/Amd.22:2009(E)
PDF disclaimer
PDF files may contain embedded typefaces. In accordance with Adobe's licensing policy, such files may be printed or viewed but shall
not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading a PDF file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create the PDF file(s) constituting this document can be found in the General Info relative to
the file(s); the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the files are suitable for
use by ISO member bodies. In the unlikely event that a problem relating to them is found, please inform the Central Secretariat at the
address given below.
This CD-ROM contains:
1) the publication ISO/IEC 14496-5:2001/Amd.22:2009 in portable document format (PDF), which can
be viewed using Adobe® Acrobat® Reader;
2) reference software for 3D Graphics Compression Model (3DGCM).
Adobe and Acrobat are trademarks of Adobe Systems Incorporated.
COPYRIGHT PROTECTED DOCUMENT
© ISO/IEC 2009
All rights reserved. Unless required for installation or otherwise specified, no part of this CD-ROM may be reproduced, stored in a retrieval
system or transmitted in any form or by any means without prior permission from ISO. Requests for permission to reproduce this product
...
INTERNATIONAL ISO/IEC
STANDARD 14496-5
Second edition
2001-12-15
AMENDMENT 22
2009-10-15
Information technology — Coding
of audio-visual objects —
Part 5:
Reference software
AMENDMENT 22: Reference software for
3D Graphics Compression Model (3DGCM)
Technologies de l'information — Codage des objets audiovisuels —
Partie 5: Logiciel de référence
AMENDEMENT 22: Logiciel de référence pour modèle
de compression graphique 3D (3DGCM)
Reference number
ISO/IEC 14496-5:2001/Amd.22:2009(E)
©
ISO/IEC 2009
---------------------- Page: 1 ----------------------
ISO/IEC 14496-5:2001/Amd.22:2009(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
COPYRIGHT PROTECTED DOCUMENT
© ISO/IEC 2009
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO/IEC 2009 – All rights reserved
---------------------- Page: 2 ----------------------
ISO/IEC 14496-5:2001/Amd.22:2009(E)
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are members of
ISO or IEC participate in the development of International Standards through technical committees
established by the respective organization to deal with particular fields of technical activity. ISO and IEC
technical committees collaborate in fields of mutual interest. Other international organizations, governmental
and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information
technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of the joint technical committee is to prepare International Standards. Draft International
Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as
an International Standard requires approval by at least 75 % of the national bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights.
Amendment 22 to ISO/IEC 14496-5:2001 was prepared by Joint Technical Committee ISO/IEC JTC 1,
Information technology, Subcommittee SC 29, Coding of audio, picture, multimedia and hypermedia
information.
© ISO/IEC 2009 – All rights reserved iii
---------------------- Page: 3 ----------------------
ISO/IEC 14496-5:2001/Amd.22:2009(E)
Information technology — Coding of audio-visual objects —
Part 5:
Reference software
AMENDMENT 22: Reference software for 3D Graphics
Compression Model (3DGCM)
After Clause 6, add the following new clause:
7 Reference Software for 3D Graphics Compression Model
7.1 Introduction
The MPEG-4 Part software (called MP25) contains two main modules: MP4XMLEncoder and
MP4XMLDecoder. The model was implemented three XML based scene graph formats (COLLADA, X3D and
XMT) and the elementary streams supported are 3DMC, BBA, IC, FAMC, JPG and JPEG 2000.
The MP4XMLEn
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.