ISO/IEC 23094-2:2021/Amd 1:2024
(Amendment)Information technology – General video coding — Part 2: Low complexity enhancement video coding — Amendment 1: Additional levels
Information technology – General video coding — Part 2: Low complexity enhancement video coding — Amendment 1: Additional levels
Technologies de l'information – Codage vidéo général — Partie 2: Codage vidéo d'amélioration de faible complexité — Amendement 1: Niveaux supplémentaires
General Information
Relations
Buy Standard
Standards Content (Sample)
FINAL
AMENDMENT ISO/IEC
DRAFT
23094-
2:2021
FDAM 1
ISO/IEC JTC 1/SC 29
Information technology – General
Secretariat: JISC
video coding —
Voting begins on:
2023-10-31
Part 2:
Voting terminates on:
Low complexity enhancement video
2023-12-26
coding
AMENDMENT 1: Additional levels
RECIPIENTS OF THIS DRAFT ARE INVITED TO
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
Reference number
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/IEC 23094-2:2021/FDAM 1:2023(E)
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS. © ISO/IEC 2023
---------------------- Page: 1 ----------------------
ISO/IEC 23094-2:2021/FDAM 1:2023(E)
FINAL
AMENDMENT ISO/IEC
DRAFT
23094-
2:2021
FDAM 1
ISO/IEC JTC 1/SC 29
Information technology – General
Secretariat: JISC
video coding —
Voting begins on:
Part 2:
Voting terminates on:
Low complexity enhancement video
coding
AMENDMENT 1: Additional levels
COPYRIGHT PROTECTED DOCUMENT
© ISO/IEC 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
RECIPIENTS OF THIS DRAFT ARE INVITED TO
ISO copyright office
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
CP 401 • Ch. de Blandonnet 8
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
CH-1214 Vernier, Geneva
DOCUMENTATION.
Phone: +41 22 749 01 11
IN ADDITION TO THEIR EVALUATION AS
Reference number
Email: copyright@iso.org
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO
ISO/IEC 230942:2021/FDAM 1:2023(E)
Website: www.iso.org
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
Published in Switzerland
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN
DARDS TO WHICH REFERENCE MAY BE MADE IN
ii
© ISO/IEC 2023 – All rights reserved
NATIONAL REGULATIONS. © ISO/IEC 2023
---------------------- Page: 2 ----------------------
ISO/IEC 23094-2:2021/FDAM 1:2023(E)
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are
members of ISO or IEC participate in the development of International Standards through technical
committees established by the respective organization to deal with particular fields of technical
activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international
organizations, governmental and nongovernmental, in liaison with ISO and IEC, also take part in the
work.
The procedures used to develop this document and those intended for its further maintenance
are described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria
needed for the different types of document should be noted. This document was drafted in
accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives or
www.iec.ch/members_experts/refdocs).
ISO and IEC draw attention to the possibility that the implementation of this document may involve the
use of (a) patent(s). ISO and IEC take no position concerning the evidence, validity or applicability of
any claimed patent rights in respect thereof. As of the date of publication of this document, ISO and IEC
had not received notice of (a) patent(s) which may be required to implement this document. However,
implementers are cautioned that this may not represent the latest information, which may be obtained
from the patent database available at www.iso.org/patents and https://patents.iec.ch. ISO and IEC shall
not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to
the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see
www.iso.org/iso/foreword.html. In the IEC, see www.iec.ch/understandingstandards.
This document was prepared by Joint Technical Committee ISO/IEC JTC 1, Information technology,
Subcommittee SC 29, Coding of audio, picture, multimedia and hypermedia information.
A list of all parts in the ISO/IEC 23094 can
...
ISO/IEC JTC 1/SC 29/WG 04 N0370
ISO/IEC JTC 1/SC 29/WG 04
MPEG Video Coding
Convenorship: CN
Document type: Output Document
Title: Text of ISO/IEC 23094-2:2021/FDAM 1:2023(E)
ISO/IEC JTC 1/SC 29FDAmd.
Secretariat: JISC
Date: 2023-10-06
Information technology – General video coding —
Part 2: Low complexity enhancement video coding
AMENDMENT 1: Additional levels
Status: Approved
Date of document: 2023-08-09
Source: ISO/IEC JTC 1/SC 29/WG 04
Expected action: None
Action due date: None
No. of pages: 15 (without cover page)
---------------------- Page: 1 ----------------------
Email of Convenor: yul@zju.edu.cn
Committee URL: https://sd.iso.org/documents/ui/#!/browse/iso/iso-iec-jtc-1/iso-iec-
jtc-1-sc-29/iso-iec-jtc-1-sc-29-wg-4
---------------------- Page: 2 ----------------------
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION
ORGANISATION INTERNATIONALE DE NORMALISATION
ISO/IEC JTC 1/SC 29/WG 04 MPEG VIDEO CODING
ISO/IEC JTC 1/SC 29/WG 04 N0370
July 2023
---------------------- Page: 3 ----------------------
ISO/IEC 23094-2:2021/FDAM 1:2023(E)
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its
implementation, no part of this publication may be reproduced or utilized otherwise in
any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be
requested from either ISO at the address below or ISO's member body in the country of
the requester.
ISO Copyright Office
CP 401 • CH-1214 Vernier, Geneva (CH)
Title Text of ISO/IEC 23094-2:2021/FDAmd.1: Additional levels
Source WG 04, MPEG Video Coding
Status Approved
Serial Number 22898
ii © ISO/IEC 2023 – All rights reserved
---------------------- Page: 4 ----------------------
ISO/IEC 23094-2:2021/FDAM 1:2023(E)
Phone: + 41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland.
© ISO/IEC 2023 – All rights reserved iii
---------------------- Page: 5 ----------------------
ISO/IEC 23094-2:2021/FDAM 1:2023(E)
Foreword
ISO (the International Organization for Standardization) and IEC (the International
Electrotechnical Commission) form the specialized system for worldwide standardization.
National bodies that are members of ISO or IEC participate in the development of International
Standards through technical committees established by the respective organization to deal with
particular fields of technical activity. ISO and IEC technical committees collaborate in fields of
mutual interest. Other international organizations, governmental and non-governmental, in
liaison with ISO and IEC, also take part in the work.
The procedures used to develop this document and those intended for its further maintenance
are described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria
needed for the different types of document should be noted. This document was drafted in
accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see
www.iso.org/directiveswww.iso.org/directives or
www.iec.ch/members_experts/refdocswww.iec.ch/members_experts/refdocs).
ISO and IEC draw attention to the possibility that the implementation of this document may
involve the use of (a) patent(s). ISO and IEC take no position concerning the evidence, validity
or applicability of any claimed patent rights in respect thereof. As of the date of publication of
this document, ISO and IEC had not received notice of (a) patent(s) which may be required to
implement this document. However, implementers are cautioned that this may not represent
the latest information, which may be obtained from the patent database available at
www.iso.org/patents and https://patents.iec.ch.www.iso.org/patents and
https://patents.iec.ch. ISO and IEC shall not be held responsible for identifying any or all such
patent rights.
Any trade name used in this document is information given for the convenience of users and
does not constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to
the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see
www.iso.org/iso/foreword.html.www.iso.org/iso/foreword.html. In the IEC, see
www.iec.ch/understanding-standardswww.iec.ch/understanding-standards.
.
This document was prepared by Joint Technical Committee ISO/IEC JTC 1, Information
technology, Subcommittee SC 29, Coding of audio, picture, multimedia and hypermedia
information.
A list of all parts in the ISO/IEC 23094 series can be found on the ISO and IEC websites.
Any feedback or questions on this document should be directed to the user’s national standards
body. A complete listing of these bodies can be found at
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.