ISO 9058:2008
(Main)Glass containers - Standard tolerances for bottles
Glass containers - Standard tolerances for bottles
ISO 9058:2008 specifies tolerances for glass bottles of circular cross-section and nominal capacity from 50 ml to 5 000 ml.
Récipients en verre — Tolérances standards pour bouteilles
L'ISO 9058:2008 spécifie certaines tolérances des bouteilles en verre de section circulaire et de capacité nominale comprise entre 50 ml et 5 000 ml.
General Information
- Status
- Published
- Publication Date
- 26-Feb-2008
- Technical Committee
- ISO/TC 63 - Glass containers
- Drafting Committee
- ISO/TC 63 - Glass containers
- Current Stage
- 9093 - International Standard confirmed
- Start Date
- 06-Feb-2025
- Completion Date
- 13-Dec-2025
Relations
- Effective Date
- 15-Apr-2008
Overview
ISO 9058:2008 is an international standard that specifies standard tolerances for glass bottles with circular cross-sections. It covers glass containers ranging in nominal capacity from 50 ml to 5,000 ml, providing essential guidelines on dimensional and volumetric tolerances. Developed by ISO/TC 63 (Glass Containers Technical Committee), this second edition updates the original 1992 version to reflect current industry requirements and ensure consistency in glass bottle manufacturing.
This standard is crucial for manufacturers, quality control professionals, and packaging engineers aiming to maintain uniform quality and interchangeability in glass bottles used worldwide.
Key Topics
ISO 9058:2008 outlines several key tolerance criteria for glass bottles, including:
Capacity Tolerance
Defines the acceptable error margin on the effective capacity of bottles. Capacity errors range from 1% to 10% depending on bottle size, ensuring reliable volumetric accuracy for different bottle volumes.Height Tolerance
Specifies the allowable deviation in bottle height based on a formula involving the nominal height, allowing flexibility while maintaining standardization.Maximum Diameter Tolerance
Provides tolerance limits for the bottle's maximum body diameter, essential for compatibility with packaging machinery and storage.Verticality Tolerance
Regulates the deviation of the bottle’s axis from vertical alignment. The allowable verticality tolerance varies with bottle height, ensuring stability and ease of handling.Non-Parallelism Tolerance
Controls the degree of non-parallelism between the bottle’s ring and its base, critical for securing consistent sealing and proper placement.
The standard references additional ISO documents like ISO 7348 (Glass Containers Vocabulary) and ISO 9009 (Testing height and non-parallelism) to ensure comprehensive application of terminology and test methods.
Applications
ISO 9058:2008 is widely applied in industries focusing on:
Glass Bottle Manufacturing
Enables manufacturers to produce bottles with standardized dimensions and consistent capacity tolerances, minimizing defects and enhancing customer satisfaction.Quality Assurance and Inspection
Provides clear benchmarks for inspecting and verifying glass bottles’ dimensional accuracy, helping suppliers meet contractual and regulatory requirements.Packaging and Bottling
Assists packaging engineers in designing equipment that accommodates standard tolerances, improving bottle fitting, capping, and transportation stability.Regulatory Compliance
Supports compliance with international trade and safety regulations by aligning glass bottle production with globally recognized specifications.
By adopting ISO 9058:2008, companies can optimize production processes, reduce material waste, and ensure compatibility with downstream packaging and filling operations.
Related Standards
For comprehensive application and understanding, ISO 9058:2008 aligns closely with other standards, including:
ISO 7348:1992 - Glass containers - Vocabulary related to manufacturing and measurements, which provides the definitions for terms used in glass container standards.
ISO 9009:1991 - Glass containers - Test methods for measuring height and non-parallelism, essential for implementing the testing protocols referenced in ISO 9058.
Council Directive 75/107/EEC - A European guideline relating to acceptable tolerances in container capacities, forming part of the foundation for this ISO standard.
These related standards complement ISO 9058 by establishing vocabulary, testing methodologies, and regulatory frameworks critical for the global trade and standardization of glass bottles.
Keywords: ISO 9058:2008, glass bottles, standard tolerances, capacity tolerance, verticality tolerance, packaging standards, glass container manufacturing, quality assurance, bottle dimensions, circular cross-section bottles.
Frequently Asked Questions
ISO 9058:2008 is a standard published by the International Organization for Standardization (ISO). Its full title is "Glass containers - Standard tolerances for bottles". This standard covers: ISO 9058:2008 specifies tolerances for glass bottles of circular cross-section and nominal capacity from 50 ml to 5 000 ml.
ISO 9058:2008 specifies tolerances for glass bottles of circular cross-section and nominal capacity from 50 ml to 5 000 ml.
ISO 9058:2008 is classified under the following ICS (International Classification for Standards) categories: 55.100 - Bottles. Pots. Jars. The ICS classification helps identify the subject area and facilitates finding related standards.
ISO 9058:2008 has the following relationships with other standards: It is inter standard links to ISO 9058:1992. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
You can purchase ISO 9058:2008 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of ISO standards.
Standards Content (Sample)
INTERNATIONAL ISO
STANDARD 9058
Second edition
2008-03-01
Glass containers — Standard tolerances
for bottles
Récipients en verre — Tolérances standards pour bouteilles
Reference number
©
ISO 2008
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall
not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the
unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
©
ii ISO 2008 – All rights reserved
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International
Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 9058 was prepared by Technical Committee ISO/TC 63, Glass containers.
This second edition cancels and replaces the first edition (ISO 9058:1992), which has been technically revised.
©
ISO 2008 – All rights reserved iii
.
...
NORME ISO
INTERNATIONALE 9058
Deuxième édition
2008-03-01
Récipients en verre — Tolérances
standards pour bouteilles
Glass containers — Standard tolerances for bottles
Numéro de référence
©
ISO 2008
PDF — Exonération de responsabilité
Le présent fichier PDF peut contenir des polices de caractères intégrées. Conformément aux conditions de licence d'Adobe, ce fichier
peut être imprimé ou visualisé, mais ne doit pas être modifié à moins que l'ordinateur employé à cet effet ne bénéficie d'une licence
autorisant l'utilisation de ces polices et que celles-ci y soient installées. Lors du téléchargement de ce fichier, les parties concernées
acceptent de fait la responsabilité de ne pas enfreindre les conditions de licence d'Adobe. Le Secrétariat central de l'ISO décline toute
responsabilité en la matière.
Adobe est une marque déposée d'Adobe Systems Incorporated.
Les détails relatifs aux produits logiciels utilisés pour la création du présent fichier PDF sont disponibles dans la rubrique General Info du
fichier; les paramètres de création PDF ont été optimisés pour l'impression. Toutes les mesures ont été prises pour garantir l'exploitation
de ce fichier par les comités membres de l'ISO. Dans le cas peu probable où surviendrait un problème d'utilisation, veuillez en informer
le Secrétariat central à l'adresse donnée ci-dessous.
DOCUMENT PROTÉGÉ PAR COPYRIGHT
Droits de reproduction réservés. Sauf prescription différente, aucune partie de cette publication ne peut être reproduite ni utilisée sous
quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l'accord écrit
de l'ISO à l'adresse ci-après ou du comité membre de l'ISO dans le pays du demandeur.
ISO copyright office
Case postale 56 CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Publié en Suisse
©
ii ISO 2008 – Tous droits réservés
Avant-propos
L'ISO (Organisation internationale de normalisation) est une fédération mondiale d'organismes nationaux de
normalisation (comités membres de l'ISO). L'élaboration des Normes internationales est en général confiée
aux comités techniques de l'ISO. Chaque comité membre intéressé par une étude a le droit de faire partie du
comité technique créé à cet effet. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec l'ISO participent également aux travaux. L'ISO collabore étroitement avec la
Commission électrotechnique internationale (CEI) en ce qui concerne la normalisation électrotechnique.
Les Normes internationales sont rédigées conformément aux règles données dans les Directives ISO/CEI,
Partie 2.
La tâche principale des comités techniques est d'élaborer les Normes internationales. Les projets de Normes
internationales adoptés par les comités techniques sont soumis aux comités membres pour vote. Leur
publication comme Normes internationales requiert l'approbation de 75 % au moins des comités membres
votants.
L'attention est appelée sur le fait que certains des éléments du présent document peuvent faire l'objet de droits
de propriété intellectuelle ou de droits analogues. L'ISO ne saurait être tenue pour responsable de ne pas avoir
identifié de tels droits de propriété et averti de leur existence.
L'ISO 9058 a été élaborée par le comité technique ISO/TC 63, Récipients en verre.
Cette deuxième édition annule et remplace la première édition (ISO 9058:1992), dont elle constitue une
révis
...
Die ISO 9058:2008 ist ein bedeutendes Dokument, das spezifische Toleranzen für Glasflaschen mit kreisförmigem Querschnitt und einer Nennkapazität von 50 ml bis 5.000 ml festlegt. Der Umfang dieser Norm ist entscheidend für die Glasindustrie, da sie sicherstellt, dass die gefertigten Flaschen innerhalb definierter Maße liegen, was zu einer verbesserten Qualität und Konsistenz der Produkte führt. Ein herausragendes Merkmal der ISO 9058:2008 ist die präzise Definition von Toleranzen, die eine wichtige Rolle bei der Herstellung und Qualitätskontrolle von Glasbehältern spielt. Diese Toleranzen sind nicht nur für Hersteller von Bedeutung, sondern auch für Qualitätsprüfer, die sicherstellen müssen, dass die Produkte den Anforderungen entsprechen. Durch die Standardisierung dieser Maßstäbe wird die Marktfähigkeit der Glasflaschen erhöht, da sie leicht in verschiedenen Märkten und Anwendungen akzeptiert werden können. Die Relevanz der ISO 9058:2008 ist unbestritten, insbesondere in einer Zeit, in der Qualität und Normen in der Industrie immer entscheidender werden. Unternehmen, die diese Norm einhalten, profitieren von einer höheren Effizienz in der Produktion und verringerten Ausschussraten, was letztlich zu Kosteneinsparungen führt. Zudem fördert die Norm ein einheitliches Verständnis von Qualität und Leistung in der Branche, was die Zusammenarbeit zwischen Herstellern, Lieferanten und Kunden erleichtert. Insgesamt bietet die ISO 9058:2008 eine klare und umfassende Richtung, die für die Entwicklung und Herstellung von Glasflaschen unerlässlich ist. Die Norm trägt nicht nur zur Verbesserung der Produktqualität bei, sondern fördert auch Innovation und Fortschritt innerhalb der Glasindustrie, indem sie einen stabilen Rahmen für die Herstellung und den Handel von Glasbehältern bereitstellt.
ISO 9058:2008は、円形断面を持つガラス容器に対する標準的な許容範囲を規定しています。この標準の主な範囲は、容量が50 mlから5,000 mlのガラス瓶を対象としており、多様な業界においてガラスボトルの製造と品質管理における信頼性を向上させることを目的としています。 この標準の強みは、製品の均一性と安全性を保証するための具体的な数値基準を提供する点にあります。ISO 9058:2008に従うことで、製造者はガラス瓶のサイズと形状の一貫性を維持し、顧客の期待に応える製品を提供できるようになります。また、許容範囲が明確に定義されているため、品質管理プロセスが簡素化され、リードタイムの短縮やコスト削減にも寄与します。 さらに、ISO 9058:2008は、飲料や化粧品、薬品といった様々な分野で使用されるガラス瓶の標準化された品質を確保するために不可欠です。この点において、国際的な取引や市場参入を促進する役割も果たしており、各国の製造業者がこの基準を遵守することで、国際的な信頼を築くことが可能になります。 したがって、ISO 9058:2008は、ガラス瓶の製造における標準的な許容範囲を提供することで、品質、効率性、国際的な取引を促進する重要な文書です。全体として、この標準はガラス容器業界における基盤とも言える存在であり、今後の製造プロセスの円滑化と品質向上に貢献し続けるでしょう。
ISO 9058:2008 is a pivotal standard in the glass manufacturing industry, focusing specifically on the tolerances for glass containers, particularly bottles. This standard encompasses glass bottles that feature a circular cross-section and have a nominal capacity ranging from 50 ml to 5,000 ml. The clear specification of tolerances is essential for manufacturers who aim to ensure consistency in production and quality control. One of the primary strengths of ISO 9058:2008 is its comprehensive approach to the dimensional tolerances required for glass bottles. By detailing acceptable variations, the standard aids manufacturers in minimizing defects and enhancing product reliability. This is particularly crucial in industries where the integrity of packaging can significantly influence consumer safety and product performance. Another notable aspect is the standard's relevance across various applications. From beverage packaging to pharmaceutical uses, ISO 9058:2008 caters to a broad spectrum of sectors that rely on glass containers. The ability of this standard to bridge diverse industries reinforces its importance and supports global trade by ensuring that products meet internationally recognized criteria. In addition, ISO 9058:2008 facilitates communication between manufacturers, suppliers, and regulatory bodies. By adhering to this standard, stakeholders can maintain a shared understanding of tolerance specifications, which ultimately leads to improved collaboration and efficiency throughout the supply chain. In summary, ISO 9058:2008 significantly contributes to the glass bottle manufacturing sector by establishing essential tolerances for a wide range of applications. Its strengths lie in promoting quality, consistency, and interoperability, making it a crucial reference for any organization involved in the production and use of glass containers.
La norme ISO 9058:2008 établit des tolérances standardisées pour les contenants en verre, principalement axée sur les bouteilles à section circulaire et avec une capacité nominale variant de 50 ml à 5 000 ml. L’objectif de cette norme est de garantir la qualité et l’uniformité des bouteilles en verre, ce qui est essentiel pour les fabricants, les distributeurs et les utilisateurs finaux. L’un des points forts de la norme ISO 9058:2008 est son cadre de tolérances clairement défini, permettant aux entreprises de s'assurer que leurs produits respectent des critères de qualité rigoureux. Cela est particulièrement important dans des secteurs où la précision dimensionnelle influence la fonctionnalité des produits, comme dans l'industrie alimentaire et pharmaceutique. Les tolérances précises fournies par cette norme facilitent également le contrôle qualité tout au long du processus de production. De plus, la norme ISO 9058:2008 répond aux besoins croissants de standardisation dans l'industrie du verre, contribuant à harmoniser les pratiques de fabrication à l'échelle mondiale. En spécifiant des tolérances pour des volumes de bouteilles aussi variés, elle permet aux fabricants de diversifier leur offre tout en maintenant la conformité aux exigences standardisées. En définitive, l'adoption de la norme ISO 9058:2008 est d'une grande pertinence pour les acteurs du marché du verre, car elle assure non seulement la qualité et la sécurité des produits, mais renforce également la compétitivité des entreprises en facilitant leur accès à de nouveaux marchés grâce à la reconnaissance internationale des normes.
ISO 9058:2008 표준은 원형 단면을 가진 유리 병에 대한 표준 허용 오차를 명시하고 있으며, 용량은 50 ml에서 5,000 ml까지 다양합니다. 이 표준은 유리 병 제조업체와 품질 관리 부서에 필수적인 지침을 제공하여, 제품의 품질과 일관성을 유지하는 데 큰 기여를 합니다. ISO 9058:2008의 강점은 명확한 허용 오차 범위를 제시함으로써, 생산 공정에서 발생할 수 있는 변동성을 효과적으로 관리할 수 있게 해준다는 점입니다. 특정 용량의 유리 병을 제작하는 과정에서, 이러한 허용 오차는 고객 요구 사항을 충족시키는 기본 기준이 됩니다. 특히, 상업적 응용 분야에서 유리 병의 정확한 크기와 용량은 제품 안전성 및 소비자 만족도에 결정적인 영향을 미칩니다. 이 표준은 또한 유리 병의 유통 및 사용과 관련된 다양한 산업 분야에서 통일된 품질 기준을 확립하게 도와줍니다. 시장의 글로벌화에 따라, ISO 9058:2008은 국제적으로 인정받는 품질 표준으로 자리잡아 있으며, 특히 수출입 과정에서 필수적인 기준으로 작용합니다. 따라서 이 문서는 유리 제조업체들이 경쟁력을 갖추고 국제 시장에서 성공적으로 활동할 수 있도록 지원합니다. 결론적으로, ISO 9058:2008은 유리 병 제조에 있어서 중요한 역할을 하며, 생산 안정성을 높이고 고객의 기대를 충족시키는 데 기여하는 핵심 표준으로 평가됩니다. 이 표준의 채택은 유리 산업 전반에 걸쳐 품질 관리의 일관성을 더욱 강화하는 데 기여할 것입니다.
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...