ISO/TR 2822-2:2017
(Main)Leather — Raw cattle hides and calf skins — Part 2: Guidelines for grading on the basis of mass
Leather — Raw cattle hides and calf skins — Part 2: Guidelines for grading on the basis of mass
ISO/TR 2822-2:2017 provides guidelines for grading cattle hides and calf skins on the basis of mass. It lists the practices followed in those countries that produce cattle hides and calf skins.
Peaux brutes de bovidés — Partie 2: Lignes directrices pour le classement sur la base de la masse
General Information
Relations
Standards Content (Sample)
TECHNICAL ISO/TR
REPORT 2822-2
First edition
2017-02
Leather — Raw cattle hides and calf
skins —
Part 2:
Guidelines for grading on the basis of
mass
Peaux brutes de bovidés —
Partie 2: Lignes directrices pour le classement sur la base de la masse
Reference number
ISO/TR 2822-2:2017(E)
©
ISO 2017
---------------------- Page: 1 ----------------------
ISO/TR 2822-2:2017(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2017, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2017 – All rights reserved
---------------------- Page: 2 ----------------------
ISO/TR 2822-2:2017(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Trimming . 3
4.1 Cattle hides . 3
4.2 Calf skins . 3
5 Determination of mass . 3
5.1 Raw hides and skins . 3
5.2 Wet salted hides and skins . 3
5.3 Dry salted hides and skins . 3
5.4 Dried hides and skins . 3
6 Classification of hides and skins in different countries . 4
6.1 Germany . 4
6.2 North America . 4
6.3 South America . 5
6.4 North Africa . 5
6.5 South Africa . 5
6.6 West Africa . 6
6.7 East Africa . 6
6.8 China . 6
6.9 India and Pakistan . 7
6.10 United Kingdom . 7
Bibliography .10
© ISO 2017 – All rights reserved iii
---------------------- Page: 3 ----------------------
ISO/TR 2822-2:2017(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment,
as well as information about ISO’s adherence to the World Trade Organization (WTO) principles in the
Technical Barriers to Trade (TBT) see the following URL: www.iso.org/iso/foreword.html
This document was prepared by Technical Committee ISO/TC 120, Leather, Subcommittee SC 1, Raw
hides and skins including pickled pelts.
A list of all parts in the ISO 2822 series can be found on the ISO website.
iv © ISO 2017 – All rights reserved
---------------------- Page: 4 ----------------------
ISO/TR 2822-2:2017(E)
Introduction
The variation in weight ranges of cattle hides and calf skins prevailing among resource countries when
graded based on mass and size is usually far too large to be accommodated in a common standard. This
document has been developed as a technical report to serve as a reference.
© ISO 2017 – All rights reserved v
---------------------- Page: 5 ----------------------
TECHNICAL REPORT ISO/TR 2822-2:2017(E)
Leather — Raw cattle hides and calf skins —
Part 2:
Guidelines for grading on the basis of mass
1 Scope
This document provides guidelines for grading cattle hides and calf skins on the basis of mass. It lists
the practices followed in those countries that produce cattle hides and calf skins.
2 Normative references
There are no normative references in this document.
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— IEC Electropedia: available at http://www.electropedia.org/
— ISO Online browsing platform: available at http://www.iso.org/obp
3.1
baby calf
small, lightweight skin of mass up to 4,0 kg green weight from a young, milk-fed bovine
3.2
bull hide
hide from an uncastrated male bovine
Note 1 to entry: Hides from bulls are characterized by thick and rough head, neck and shoulders,
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.