Enhancements for harmonization

Améliorations pour harmonisation

General Information

Status
Published
Publication Date
26-Nov-2020
Current Stage
5060 - Close of voting Proof returned by Secretariat
Start Date
06-Nov-2020
Completion Date
06-Nov-2020
Ref Project

RELATIONS

Buy Standard

Standard
ISO/IEC 10373-6:2020/Amd 2:2020 - Enhancements for harmonization
English language
10 pages
sale 15% off
Preview
sale 15% off
Preview
Draft
ISO/IEC 10373-6:2020/PRF Amd 2:Version 13-okt-2020 - Enhancements for harmonization
English language
10 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (sample)

INTERNATIONAL ISO/IEC
STANDARD 10373-6
Fourth edition
2020-07
AMENDMENT 2
2020-11
Cards and security devices for
personal identification — Test
methods —
Part 6:
Contactless proximity objects
AMENDMENT 2: Enhancements for
harmonization
Cartes et dispositifs de sécurité pour l'identification personnelle —
Méthodes d'essai —
Partie 6: Objets sans contact de proximité
AMENDEMENT 2: Améliorations pour harmonisation
Reference number
ISO/IEC 10373-6:2020/Amd.2:2020(E)
ISO/IEC 2020
---------------------- Page: 1 ----------------------
ISO/IEC 10373-6:2020/Amd.2:2020(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO/IEC 2020

All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may

be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting

on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address

below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO/IEC 2020 – All rights reserved
---------------------- Page: 2 ----------------------
ISO/IEC 10373-6:2020/Amd.2:2020(E)
Foreword

ISO (the International Organization for Standardization) and IEC (the International Electrotechnical

Commission) form the specialized system for worldwide standardization. National bodies that

are members of ISO or IEC participate in the development of International Standards through

technical committees established by the respective organization to deal with particular fields of

technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other

international organizations, governmental and non-governmental, in liaison with ISO and IEC, also

take part in the work.

The procedures used to develop this document and those intended for its further maintenance are

described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for

the different types of document should be noted. This document was drafted in accordance with the

editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).

Attention is drawn to the possibility that some of the elements of this document may be the subject

of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent

rights. Details of any patent rights identified during the development of the document will be in the

Introduction and/or on the ISO list of patent declarations received (see www .iso .org/ patents) or the IEC

list of patent declarations received (see http:// patents .iec .ch).

Any trade name used in this document is information given for the convenience of users and does not

constitute an endorsement.

For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and

expressions related to conformity assessment, as well as information about ISO's adherence to the

World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see www .iso .org/

iso/ foreword .html.

This document was prepared by Joint Technical Committee ISO/IEC JTC 1, Information technology,

Subcommittee SC 17, Cards and security devices for personal identification.
A list of all parts in the ISO 10373 series can be found on the ISO website.

Any feedback or questions on this document should be directed to the user’s national standards body. A

complete listing of these bodies can be found at www .iso .org/ members .html.
© ISO/IEC 2020 – All rights reserved iii
---------------------- Page: 3 ----------------------
ISO/IEC 10373-6:2020/Amd.2:2020(E)
Cards and security devices for personal identification —
Test methods —
Part 6:
Contactless proximity objects
AMENDMENT 2: Enhancements for harmonization
4.7, Table 3
Add the following row at the end of the table:
Parameter Description Unit
Type A collision Collision resolution for Type A
resolution
supported
H.2.3.4, Table H.8
Replace the table with the following:
Explanation Test result
Only when the PCD: PASS
— starts the bit frame anticollision loop or
— resets the operating field
Any other case FAIL
H.2.4.1
Add the following sentence at the end of the paragraph:

"Procedure 4 defined in H.2.4.3.4 is only applicable to PCDs supporting Type A collision resolution; and

Procedure 5 defined in H.2.4.3.5 is only applicable to PCDs not supporting Type A collision resolution

(see Table 3)."
© ISO/IEC 2020 – All rights reserved 1
---------------------- Page: 4 ----------------------
ISO/IEC 10373-6:2020/Amd.2:2020(E)
H.2.4.3.5
Add the following paragraph at the beginning of the subclause:

"This procedure is only applicable to PCDs supporting Type A collision resolution (see Table 3)."

H.2.4.3.6
Add the following new subclause after H.2.4.3.5:
H.2.4.3.6 Procedure 5 (Detection of full bitwise anticollision loop for PICC)

This procedure is only applicable to PCDs not supporting Type A collision resolution (see Table 3).

Use the following sequence:
a) The UT performs the activation procedure according to H.1.8.1.
b) The LT waits until the PCD sends a valid REQA/WUPA command frame

c) The LT answers with ATQA indicating bit frame anticollision and UID size: single (bits b8 and b7

equal (00)b).
d) The PCD shall send ANTICOLLISION command: '93 20'.

e) The LT answers by a stream of 40 bits by emulating a collision on every bit, including parity bits.

f) The PCD shall reset the operating field.
Table H.13 gives part of the procedure as a scenario.

Table H.13 — Scenario H.5: Detection of full bitwise anticollision loop for PICC (Procedure 5)

Test PCD LT
REQA/WUPA →
REQA/WUPA
← ATQA (single size UID)
ANTICOLLISION command
('93 20')
ANTICOLLISION
← 40 bits full collision frame
RESET Reset of the operating field →
H.2.4.4, Table H.13
Replace the table with the following:
Explanation Test result
Only when the PCD’s behavior matches each PASS
applicable procedure expected scenario
Any other case FAIL
2 © ISO/IEC 2020 – All rights reserved
---------------------- Page: 5 ----------------------
ISO/IEC 10373-6:2020/Amd.2:2020(E)
H.2.5.3.2

Delete the subclause "H.2.5.3.2 Procedure 1" and renumber the subsequent subclauses.

H.2.10.3
Replace step g) with the following:

"g) The PCD either shall send R(NAK) or shall send an S(DESELECT) request or shall reset the

operating field."
H.2.10.3, Table H.24
Replace the last row with the following:
PCD LT
R(NAK) ('BA' CID CRC or 'B2' CRC)
S(DESELECT) →
reset of the operating field
H.3.3.3.2
Replace step l) with the following:

"l) The PCD either shall send an S(DESELECT) request without NAD and CID or shall reset the

operating field."
H.3.3.3.2, Table 28
Replace the last row with the followi
...

INTERNATIONAL ISO/IEC
STANDARD 10373-6
Fourth edition
2020-07
AMENDMENT 2
ISO pub-date
Cards and security devices for
personal identification — Test
methods —
Part 6:
Contactless proximity objects
AMENDMENT 2: Enhancements for
harmonization
Cartes et dispositifs de sécurité pour l'identification personnelle —
Méthodes d'essai —
Partie 6: Objets sans contact de proximité
AMENDEMENT 2: Améliorations pour harmonisation
PROOF/ÉPREUVE
Reference number
ISO/IEC 10373-6:2020/Amd.2:2020(E)
ISO/IEC 2020
---------------------- Page: 1 ----------------------
ISO/IEC 10373-6:2020/Amd.2:2020(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO/IEC 2020

All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may

be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting

on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address

below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii PROOF/ÉPREUVE © ISO/IEC 2020 – All rights reserved
---------------------- Page: 2 ----------------------
ISO/IEC 10373-6:2020/Amd.2:2020(E)
Foreword

ISO (the International Organization for Standardization) and IEC (the International Electrotechnical

Commission) form the specialized system for worldwide standardization. National bodies that

are members of ISO or IEC participate in the development of International Standards through

technical committees established by the respective organization to deal with particular fields of

technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other

international organizations, governmental and non-governmental, in liaison with ISO and IEC, also

take part in the work.

The procedures used to develop this document and those intended for its further maintenance are

described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for

the different types of document should be noted. This document was drafted in accordance with the

editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).

Attention is drawn to the possibility that some of the elements of this document may be the subject

of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent

rights. Details of any patent rights identified during the development of the document will be in the

Introduction and/or on the ISO list of patent declarations received (see www .iso .org/ patents) or the IEC

list of patent declarations received (see http:// patents .iec .ch).

Any trade name used in this document is information given for the convenience of users and does not

constitute an endorsement.

For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and

expressions related to conformity assessment, as well as information about ISO's adherence to the

World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see www .iso .org/

iso/ foreword .html.

This document was prepared by Joint Technical Committee ISO/IEC JTC 1, Information technology,

Subcommittee SC 17, Cards and security devices for personal identification.
A list of all parts in the ISO 10373 series can be found on the ISO website.

Any feedback or questions on this document should be directed to the user’s national standards body. A

complete listing of these bodies can be found at www .iso .org/ members .html.
© ISO/IEC 2020 – All rights reserved PROOF/ÉPREUVE iii
---------------------- Page: 3 ----------------------
ISO/IEC 10373-6:2020/Amd.2:2020(E)
Cards and security devices for personal identification —
Test methods —
Part 6:
Contactless proximity objects
AMENDMENT 2: Enhancements for harmonization
4.7, Table 3
Add the following row at the end of the table:
Parameter Description Unit
Type A collision Collision resolution for Type A
resolution
supported
H.2.3.4, Table H.8
Replace the table with the following:
Explanation Test result
Only when the PCD: PASS
— starts the bit frame anticollision loop or
— resets the operating field
Any other case FAIL
H.2.4.1
Add the following sentence at the end of the paragraph:

"Procedure 4 defined in H.2.4.3.4 is only applicable to PCDs supporting Type A collision resolution; and

Procedure 5 defined in H.2.4.3.5 is only applicable to PCDs not supporting Type A collision resolution

(see Table 3)."
© ISO/IEC 2020 – All rights reserved PROOF/ÉPREUVE 1
---------------------- Page: 4 ----------------------
ISO/IEC 10373-6:2020/Amd.2:2020(E)
H.2.4.3.5
Add the following paragraph at the beginning of the subclause:

"This procedure is only applicable to PCDs supporting Type A collision resolution (see Table 3)."

H.2.4.3.6
Add the following new subclause after H.2.4.3.5:
H.2.4.3.6 Procedure 5 (Detection of full bitwise anticollision loop for PICC)

This procedure is only applicable to PCDs not supporting Type A collision resolution (see Table 3).

Use the following sequence:
a) The UT performs the activation procedure according to H.1.8.1.
b) The LT waits until the PCD sends a valid REQA/WUPA command frame

c) The LT answers with ATQA indicating bit frame anticollision and UID size: single (bits b8 and b7

equal (00)b).
d) The PCD shall send ANTICOLLISION command: '93 20'.

e) The LT answers by a stream of 40 bits by emulating a collision on every bit, including parity bits.

f) The PCD shall reset the operating field.
Table H.13 gives part of the procedure as a scenario.

Table H.13 — Scenario H.5: Detection of full bitwise anticollision loop for PICC (Procedure 5)

Test PCD LT
REQA/WUPA →
REQA/WUPA
← ATQA (single size UID)
ANTICOLLISION command
('93 20')
ANTICOLLISION
← 40 bits full collision frame
RESET Reset of the operating field →
H.2.4.4, Table H.13
Replace the table with the following:
Explanation Test result
Only when the PCD’s behavior matches each PASS
applicable procedure expected scenario
Any other case FAIL
2 PROOF/ÉPREUVE © ISO/IEC 2020 – All rights reserved
---------------------- Page: 5 ----------------------
ISO/IEC 10373-6:2020/Amd.2:2020(E)
H.2.5.3.2

Delete the subclause "H.2.5.3.2 Procedure 1" and renumber the subsequent subclauses.

H.2.10.3
Replace step g) with the following:

"g) The PCD either shall send R(NAK) or shall send an S(DESELECT) request or shall reset the

operating field."
H.2.10.3, Table H.24
Replace the last row with the following:
PCD LT
R(NAK) ('BA' CID CRC or 'B2' CRC)
S(DESELECT) →
reset of the operating field
H.3.3.3.2
Replace step l) with the following:

"l) The PCD either shall send an S(DESELECT) request without NAD and CID or shall reset the

operating field."
H.3.3.3.2, Table 28
Replace the last row with the following:
PCD LT
Optional R(NAK) wi
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.