ISO/IEC 14776-346:2024

Information technology - Small computer system interface (SCSI) - Part 346: Zoned Block Commands - 2 (ZBC-2)

This document defines the model and command set extensions to facilitate operation of zoned block devices. The clauses in this document, implemented in conjunction with the applicable clauses of SPC-6 and SBC-5, specify the standard command set for zoned block devices.

Technologies de l'information — Interface de petit système d'ordinateur (SCSI) — Partie 346: Commandes de blocs de zones - 2 (ZBC-2)

General Information

• Status: Published
• Publication Date: 23-Sep-2024
• ICS: 35.200 - Interface and interconnection equipment
• Technical Committee: ISO/IEC JTC 1 - Information technology
• Drafting Committee: ISO/IEC JTC 1 - Information technology
• Current Stage: 6060 - International Standard published
• Start Date: 24-Sep-2024
• Due Date: 16-Feb-2025
• Completion Date: 24-Sep-2024

Overview

ISO/IEC 14776-346:2024 - "Information technology - Small computer system interface (SCSI) - Part 346: Zoned Block Commands - 2 (ZBC-2)" defines the model and command set extensions needed to operate zoned block devices. Implemented together with the applicable clauses of SPC-6 and SBC-5, this International Standard specifies the standard SCSI command set and behaviors required for interoperable zoned block device operation.

Key topics and technical requirements

This part of the ISO/IEC 14776 series addresses core technical elements required to manage and use zoned block storage:

• Zoned block device model - formal model describing zones, their lifecycle and constraints.
• Zone types and conditions - classifications and state machine concepts that govern zone behavior.
• Zone attributes - metadata and descriptors that identify zone properties and capabilities.
• Zone operations and actions - command semantics for manipulating zones (for example: open, close, finish, reset and related operations as defined in the standard).
• Reporting and discovery - mechanisms for reporting zone layout, attributes and status to hosts.
• Write pointer features - requirements for managing sequential write pointers and rules that affect write ordering and permitted operations.
• Initialization, allocation and access rules - constraints for read/write and zone lifecycle transitions, including models requiring sequential writes.

These topics are specified as command set extensions and normative behaviors to be applied in conjunction with SPC-6 and SBC-5.

Practical applications and who uses this standard

ISO/IEC 14776-346:2024 is intended for stakeholders who design, implement or integrate zoned block storage:

• Storage device manufacturers - to implement compliant SCSI command extensions for zoned devices.
• Firmware and controller developers - to enforce zone models, write pointer rules and command semantics.
• Operating system and driver authors - to support zoned device discovery, reporting and correct host-side command flows.
• Storage vendors and integrators - for ensuring interoperability across hosts and devices in data center deployments.
• Test labs and certification bodies - for interoperability and conformance testing against the ZBC-2 specification.

Adopting the ZBC-2 command set enables reliable, standardized management of zoned block devices and supports ecosystem interoperability.

Related standards

• SPC-6 (SCSI Primary Commands) - referenced for core SCSI behavior and common command semantics.
• SBC-5 (SCSI Block Commands) - provides base block command definitions used together with ZBC-2.
• Other parts of the ISO/IEC 14776 series provide additional SCSI-related specifications.

Keywords: ISO/IEC 14776-346:2024, ZBC-2, Zoned Block Commands, SCSI zoned block devices, SPC-6, SBC-5, zone model, write pointer, zone operations.

Standards Content (Sample)

International
Standard
ISO/IEC 14776-346
First edition
Information technology — Small
2024-09
computer system interface (SCSI) —
Part 346:
Zoned Block Commands - 2 (ZBC-2)
Technologies de l'information — Interface de petit système
d'ordinateur (SCSI) —
Partie 346: Commandes de blocs de zones - 2 (ZBC-2)
Reference number
© ISO/IEC 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
© ISO/IEC 2024 – All rights reserved
ii
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are members
of ISO or IEC participate in the development of International Standards through technical committees
established by the respective organization to deal with particular fields of technical activity. ISO and IEC
technical committees collaborate in fields of mutual interest. Other international organizations, governmental
and non-governmental, in liaison with ISO and IEC, also take part in the work.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types of
document should be noted (see www.iso.org/directives or www.iec.ch/members_experts/refdocs).
ISO and IEC draw attention to the possibility that the implementation of this document may involve the use of
(a) patent(s). ISO and IEC take no position concerning the evidence, validity or applicability of any claimed
patent rights in respect thereof. As of the date of publication of this document, ISO and IEC had not received
notice of (a) patent(s) which may be required to implement this document. However, implementers are
cautioned that this may not represent the latest information, which may be obtained from the patent database
available at www.iso.org/patents and https://patents.iec.ch. ISO and IEC shall not be held responsible for
identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO's adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html.
In the IEC, see www.iec.ch/understanding-standards.
This document was prepared by INCITS (as INCITS 550-2023) and drafted in accordance with its editorial
rules. It was assigned to Joint Technical Committee ISO/IEC JTC 1, Information technology, and adopted under
the “fast-track procedure”.
A list of all parts in the ISO/IEC 14776 series can be found on the ISO and IEC websites.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html and www.iec.ch/national-
committees.
© ISO/IEC 2024 – All rights reserved
iii

&RQWHQWV
3DJH
)25(:25'[ xiiLLL
,1752'8&7,21[xiiiLY
*HQHUDO[xiiiLY
6&6,VWDQGDUGVIDPLO\[xiiiLY
6FRSH
1RUPDWLYHUHIHUHQFHV
'HILQLWLRQVV\PEROVDEEUHYLDWLRQVDQGFRQYHQWLRQV
'HILQLWLRQV
6\PEROVDQGDEEUHYLDWLRQV
$EEUHYLDWLRQV
0DWKHPDWLFDORSHUDWRUV
.H\ZRUGV
(GLWRULDOFRQYHQWLRQV
1XPHULFDQGFKDUDFWHUFRQYHQWLRQV
1XPHULFFRQYHQWLRQV
8QLWVRIPHDVXUH
%LWDQGE\WHRUGHULQJ
1RWDWLRQIRUVWDWHGLDJUDPV
=RQHG%ORFN'HYLFH0RGHO
=RQHG%ORFN'HYLFHPRGHORYHUYLHZ
(VWDEOLVKHG6&6,FRQFHSWV
3HULSKHUDOGHYLFHW\SHDQGVXSSRUWHGFRPPDQGV
=RQHG%ORFN'HYLFHPRGHOV
=RQHG%ORFN'HYLFHPRGHOVLQWURGXFWLRQ
+RVWDZDUH]RQHGEORFNGHYLFHPRGHO
+RVWPDQDJHG]RQHGEORFNGHYLFHPRGHO
'RPDLQVDQGUHDOPV]RQHGEORFNGHYLFHPRGHO
'RPDLQVDQGUHDOPV]RQHGEORFNGHYLFHPRGHORYHUYLHZ
=RQHGRPDLQV
=RQHGRPDLQ
=RQHGRPDLQVRWKHUWKDQ]RQHGRPDLQ
=RQHDFWLYDWLRQ
5HDOPV
5HDOPERXQGDU\FRQVLGHUDWLRQV
=RQHDWWULEXWHV
=RQHDWWULEXWHVVXPPDU\
=RQH7\SH]RQHDWWULEXWH
=RQH&RQGLWLRQ]RQHDWWULEXWH
:3RLQWHU]RQHDWWULEXWH
5:35HFRPPHQGHG]RQHDWWULEXWH
1RQ6HTXHQWLDO:ULWH5HVRXUFHV$FWLYH]RQHDWWULEXWH
3UHGLFWHG8QUHFRYHUHG(UURUV3UHVHQW]RQHDWWULEXWH
5HDOPDWWULEXWHV
5HDOPDWWULEXWHVRYHUYLHZ
5HVWULFW:ULWH3RLQWHU5HVHWUHDOPDWWULEXWH
5HVWULFW=RQH$FWLYDWHUHDOPDWWULEXWH
=RQHW\SHPRGHOV
=RQHW\SHPRGHOVRYHUYLHZ
&RQYHQWLRQDO]RQHPRGHO
&RQYHQWLRQDO]RQHPRGHORYHUYLHZ
:ULWHDFFHVVSDWWHUQUHTXLUHPHQWVIRUFRQYHQWLRQDO]RQHV
L
© ISO/IEC 2024 – All rights reserved
iv
5HDGDFFHVVSDWWHUQUHTXLUHPHQWVIRUFRQYHQWLRQDO]RQHV
:ULWHSRLQWHU]RQHPRGHOV
)HDWXUHVFRPPRQWRDOOZULWHSRLQWHU]RQHV
:ULWHSRLQWHUIHDWXUHV
5HVHWWLQJWKHZULWHSRLQWHU
2SHQ]RQHUHVRXUFHV
,QLWLDOL]DWLRQSDWWHUQ
:ULWHDFFHVVSDWWHUQUHTXLUHPHQWVFRPPRQWRDOOZULWHSRLQWHU]RQHV
5HDGDFFHVVSDWWHUQUHTXLUHPHQWVFRPPRQWRDOOZULWHSRLQWHU]RQHV
:ULWHSRLQWHU]RQHRSHUDWLRQV
:ULWHSRLQWHU]RQHRSHUDWLRQVRYHUYLHZ
2SHQ]RQHRSHUDWLRQ
&ORVH]RQHRSHUDWLRQ
)LQLVK]RQHRSHUDWLRQ
5HVHWZULWHSRLQWHURSHUDWLRQ
6HTXHQWLDOL]H]RQHRSHUDWLRQ
=RQHDFWLYDWLRQRSHUDWLRQ
=RQHDFWLYDWLRQRSHUDWLRQRYHUYLHZ
9HULI\DFWLYDWLRQVRSHUDWLRQ
&KDQJHDFWLYDWLRQVRSHUDWLRQ
0DQDJHRSHQ]RQHUHVRXUFHVRSHUDWLRQ
0DQDJHRSHQ]RQHUHVRXUFHVRSHUDWLRQRYHUYLHZ
6HOHFWDVHTXHQWLDOZULWHSUHIHUUHG]RQH
6HOHFWDVHTXHQWLDOZULWHUHTXLUHG]RQH
5HDGRSHUDWLRQVYHULI\RSHUDWLRQVDQGZULWHRSHUDWLRQV
6HTXHQWLDOZULWHSUHIHUUHG]RQHPRGHO
6HTXHQWLDOZULWHSUHIHUUHG]RQHPRGHORYHUYLHZ
:ULWHDFFHVVSDWWHUQUHTXLUHPHQWVIRUVHTXHQWLDOZULWHSUHIHUUHG]RQHV
5HDGDFFHVVSDWWHUQUHTXLUHPHQWVIRUVHTXHQWLDOZULWHSUHIHUUHG]RQHV
6HTXHQWLDOZULWHUHTXLUHG]RQHPRGHO
6HTXHQWLDOZULWHUHTXLUHG]RQHPRGHORYHUYLHZ
:ULWHDFFHVVSDWWHUQUHTXLUHPHQWVIRUVHTXHQWLDOZULWHUHTXLUHG]RQHV
5HDGDFFHVVSDWWHUQUHTXLUHPHQWVIRUVHTXHQWLDOZULWHUHTXLUHG]RQHV
2SHQLQJ6HTXHQWLDO:ULWH5HTXLUHG]RQHV
6HTXHQWLDORUEHIRUHUHTXLUHG]RQHPRGHO
6HTXHQWLDORUEHIRUHUHTXLUHG]RQHPRGHORYHUYLHZ
:ULWHDFFHVVSDWWHUQUHTXLUHPHQWVIRUVHTXHQWLDORUEHIRUHUHTXLUHG]RQHV
5HDGDFFHVVSDWWHUQUHTXLUHPHQWVIRUVHTXHQWLDORUEHIRUHUHTXLUHG]RQHV
=RQHFRQGLWLRQVWDWHPDFKLQH
=RQHFRQGLWLRQVWDWHPDFKLQHRYHUYLHZ
=&(PSW\VWDWH
=&(PSW\VWDWHRYHUYLHZ
7UDQVLWLRQ=&(PSW\WR=&,PSOLFLWB2SHQ
7UDQVLWLRQ=&(PSW\WR=&([SOLFLWB2SHQ
7UDQVLWLRQ=&(PSW\WR=&5HDGB2QO\
7UDQVLWLRQ=&(PSW\WR=&2IIOLQH
7UDQVLWLRQ=&(PSW\WR=&,QDFWLYH
=&,PSOLFLWB2SHQVWDWH
=&,PSOLFLWB2SHQVWDWHRYHUYLHZ
7UDQVLWLRQ=&,PSOLFLWB2SHQWR=&(PSW\
7UDQVLWLRQ=&,PSOLFLWB2SHQWR=&([SOLFLWB2SHQ
7UDQVLWLRQ=&,PSOLFLWB2SHQWR=&&ORVHG
7UDQVLWLRQ=&,PSOLFLWB2SHQWR=&)XOO
7UDQVLWLRQ=&,PSOLFLWB2SHQWR=&5HDGB2QO\
7UDQVLWLRQ=&,PSOLFLWB2SHQWR=&2IIOLQH
=&([SOLFLWB2SHQVWDWH
=&([SOLFLWB2SHQVWDWHRYHUYLHZ
LL
© ISO/IEC 2024 – All rights reserved
v

7UDQVLWLRQ=&([SOLFLWB2SHQWR=&(PSW\
7UDQVLWLRQ=&([SOLFLWB2SHQWR=&&ORVHG
7UDQVLWLRQ=&([SOLFLWB2SHQWR=&)XOO
7UDQVLWLRQ=&([SOLFLWB2SHQWR=&5HDGB2QO\
7UDQVLWLRQ=&([SOLFLWB2SHQWR=&2IIOLQH
=&&ORVHGVWDWH
=&&ORVHGVWDWHRYHUYLHZ
7UDQVLWLRQ=&&ORVHGWR=&(PSW\
7UDQVLWLRQ=&&ORVHGWR=&,PSOLFLWB2SHQ
7UDQVLWLRQ=&&ORVHGWR=&([SOLFLWB2SHQ
7UDQVLWLRQ=&&ORVHGWR=&5HDGB2QO\
7UDQVLWLRQ=&&ORVHGWR=&2IIOLQH
=&)XOOVWDWH
=&)XOOVWDWHRYHUYLHZ
7UDQVLWLRQ=&)XOOWR=&(PSW\
7UDQVLWLRQ=&)XOOWR=&5HDGB2QO\
7UDQVLWLRQ=&)XOOWR=&2IIOLQH
=&5HDGB2QO\VWDWH
=&5HDGB2QO\VWDWHRYHUYLHZ
7UDQVLWLRQ=&5HDGB2QO\WR=&2IIOLQH
=&2IIOLQHVWDWH
=&,QDFWLYHVWDWH
=&,QDFWLYHVWDWHRYHUYLHZ
7UDQVLWLRQ=&,QDFWLYHWR=&(PSW\VWDWH
*DS]RQHPRGHO
=RQHGEORFNGHYLFHH[WHQVLRQVWREORFNGHYLFHPRGHO
2YHUYLHZ
=RQHGEORFNGHYLFHLQWHUQDOUHVRXUFHPDQDJHPHQW
8QH[SHFWHGSRZHUUHPRYDO
0HGLDIDLOXUH
,QWHUDFWLRQVLQYROYLQJPRGHSDUDPHWHUEORFNGHVFULSWRUV
&DSDFLW\UHSRUWLQJDQG/%$VRXWRIUDQJH
&RQVWDQW]RQHVWDUWLQJ/%$RIIVHWV
)RUPDWRSHUDWLRQV
6DQLWL]HRSHUDWLRQV
5HVHUYDWLRQV
&DFKHV
&DFKHVRYHUYLHZ
:ULWHFDFKLQJ
&RPPDQGLQWHUDFWLRQVZLWKFDFKHV
:ULWHRSHUDWLRQDQGZULWHPHGLXPRSHUDWLRQLQWHUDFWLRQVZLWKFDFKHV
&ORVH]RQHDQGILQLVK]RQHRSHUDWLRQLQWHUDFWLRQVZLWKFDFKH
,QWHUDFWLRQVZLWK:5,7(/21*FRPPDQGV
,QWHUDFWLRQVZLWKVWRUDJHHOHPHQWGHSRSXODWLRQDQGUHVWRUDWLRQ
,QWHUDFWLRQVZLWKVWRUDJHHOHPHQWGHSRSXODWLRQDQGUHVWRUDWLRQRSHUDWLRQVWKDWPRGLI\GDWD
6WRUDJHHOHPHQWGHSRSXODWLRQZLWK]RQHPRGLILFDWLRQV
'HSRSXODWLRQZLWK]RQHPRGLILFDWLRQVRYHUYLHZ
'HSRSXODWLRQZLWK]RQHPRGLILFDWLRQVSURFHVVLQJ
+DQGOLQJXQUHFRYHUDEOHHUURUV
+DQGOLQJXQUHFRYHUDEOHHUURUVRYHUYLHZ
3UHGLFWHGXQUHFRYHUHGUHDGHUURUVLQ&RQYHQWLRQDO]RQHV
3UHGLFWHGXQUHFRYHUHGZULWHHUURUVLQ&RQYHQWLRQDO]RQHV
$OORZHGFRPPDQGVGXULQJGHSRSXODWLRQZLWK]RQHPRGLILFDWLRQVSURFHVVLQJ
(YHQWKDQGOLQJDFWLRQV
&RPPDQGVIRU]RQHGEORFNGHYLFHV
&RPPDQGVIRU]RQHGEORFNGHYLFHVRYHUYLHZ
LLL
© ISO/IEC 2024 – All rights reserved
vi
6XPPDU\RIFRPPDQGVIRU]RQHGEORFNGHYLFHV
=RQHGEORFNGHYLFHE\WH&'%IRUPDWZLWKQRGDWDWUDQVIHU
&/26(=21(FRPPDQG
),1,6+=21(FRPPDQG
23(1=21(FRPPDQG
5(029((/(0(17$1'02',)<=21(6FRPPDQG
5(32575($/06FRPPDQG
5(32575($/06FRPPDQGRYHUYLHZ
5(32575($/06SDUDPHWHUGDWD
5(32575($/06SDUDPHWHUGDWDRYHUYLHZ
5HDOPGHVFULSWRU
5HDOPGHVFULSWRURYHUYLHZ
5HDOP6WDUW(QGGHVFULSWRU
5(3257=21('20$,16FRPPDQG
5(3257=21('20$,16FRPPDQGRYHUYLHZ
5(3257=21('20$,16SDUDPHWHUGDWD
5(3257=21(6FRPPDQG
5(3257=21(6FRPPDQGRYHUYLHZ
5(3257=21(6SDUDPHWHUGDWD
5(6(7:5,7(32,17(5FRPPDQG
6(48(17,$/,=(=21(FRPPDQG
=21($&7,9$7(FRPPDQG
=21($&7,9$7(FRPPDQGRYHUYLHZ
,GHQWLI\LQJWKHFDQGLGDWH]RQHVWRDFWLYDWHDQGWKHFDQGLGDWH]RQHVWRGHDFWLYDWH
=21($&7,9$7(SDUDPHWHUGDWDDQG=21(48(5<SDUDPHWHUGDWD
=21($&7,9$7(SDUDPHWHUGDWDDQG=21(48(5<SDUDPHWHUGDWDRYHUYLHZ
=RQHDFWLYDWLRQGHVFULSWRUV
=21(48(5<FRPPDQG
3DUDPHWHUVIRU]RQHGEORFNGHYLFHV
3DUDPHWHUVIRU]RQHGEORFNGHYLFHVRYHUYLHZ
'LDJQRVWLFSDUDPHWHUV
/RJSDUDPHWHUV
/RJSDUDPHWHUVRYHUYLHZ
=RQHG%ORFN'HYLFH6WDWLVWLFVORJSDJH
=RQHG%ORFN'HYLFH6WDWLVWLFVORJSDJHRYHUYLHZ
0D[LPXP2SHQ=RQHV
0D[LPXP([SOLFLWO\2SHQ=RQHV
0D[LPXP,PSOLFLWO\2SHQ=RQHV
0LQLPXP(PSW\=RQHV
0D[LPXP1RQVHTXHQWLDO=RQHV
=RQHV(PSWLHG
6XERSWLPDO:ULWH&RPPDQGV
&RPPDQGV([FHHGLQJ2SWLPDO/LPLW
)DLOHG([SOLFLW2SHQV
5HDG5XOH9LRODWLRQV
:ULWH5XOH9LRODWLRQV
0D[LPXP,PSOLFLWO\2SHQ6HTXHQWLDO2U%HIRUH5HTXLUHG=RQHV
0RGHSDUDPHWHUV
0RGHSDUDPHWHUVRYHUYLHZ
=RQHG%ORFN'HYLFH&RQWUROPRGHSDJH
9LWDOSURGXFWGDWD93'SDUDPHWHUV
93'SDUDPHWHUVRYHUYLHZ
=RQHG%ORFN'HYLFH&KDUDFWHULVWLFV93'SDJH
$QQH[$QRUPDWLYH=%&)HDWXUH6HWV
$=%&IHDWXUHVHWVRYHUYLHZ
LY
© ISO/IEC 2024 – All rights reserved
vii

$+RVW$ZDUHIHDWXUHVHW
$+RVW0DQDJHGIHDWXUHVHW
$'RPDLQVDQG5HDOPVIHDWXUHVHW
$QQH[%LQIRUPDWLYH$SSOLFDWLRQ&OLHQW&RQVLGHUDWLRQVIRU=RQHG%ORFN'HYLFHV
%$SSOLFDWLRQFOLHQWFRQVLGHUDWLRQVIRU]RQHGEORFNGHYLFHVRYHUYLHZ
%:ULWLQJWRZULWHSRLQWHU]RQHV
%2SHQ]RQHFRQVLGHUDWLRQV
%2SHQ]RQHFRQVLGHUDWLRQVRYHUYLHZ
%([SOLFLWO\RSHQHG]RQHVDQGLPSOLFLWO\RSHQHG]RQHV
%2SHQLQJDQGFORVLQJ]RQHV
%)LQLVK]RQHRSHUDWLRQFRQVLGHUDWLRQV
%2SHQ]RQHUHVRXUFHVFRQVLGHUDWLRQVEDVHGRQ]RQHW\SH
%6HTXHQWLDOZULWHSUHIHUUHG]RQHV
%6HTXHQWLDOZULWHUHTXLUHG]RQHV
%3DUWLDOIDLOXUHV
%3DUWLDOIDLOXUHVRYHUYLHZ
%6DQLWL]HFRQVLGHUDWLRQV
$QQH[&,QIRUPDWLYH%LEOLRJUDSK\
Y
© ISO/IEC 2024 – All rights reserved
viii

7DEOHV
3DJH
7DEOH±1XPEHULQJFRQYHQWLRQV
7DEOH±&RPSDULVRQRIGHFLPDOSUHIL[HVDQGELQDU\SUHIL[HV
7DEOH±([DPSOHRIRUGHULQJRIELWVDQGE\WHVZLWKLQDGDWDGZRUG
7DEOH±([DPSOHRIRUGHULQJRIELWVDQGE\WHVZLWKLQDQHOHPHQWGZRUG
7DEOH±=RQHGEORFNGHYLFHPRGHOFRQFHSWV
7DEOH±5HTXLUHPHQWVRI]RQHGEORFNGHYLFHV
7DEOH±&RPPDQGVIRUKRVWPDQDJHG]RQHGEORFNGHYLFHV
7DEOH±=RQHGRPDLQ,'YDOXHV
7DEOH±6XPPDU\RI]RQHDWWULEXWHV
7DEOH±=RQH7\SH]RQHDWWULEXWH
7DEOH±5HODWLRQVKLSVEHWZHHQ]RQHDWWULEXWHV
7DEOH±=RQH&RQGLWLRQ]RQHDWWULEXWH
7DEOH±6XPPDU\RIUHDOPDWWULEXWHV
7DEOH±6XPPDU\RIZULWHSRLQWHU]RQHRSHUDWLRQV
7DEOH±&KDUDFWHULVWLFVDVVRFLDWHGZLWK]RQHVWDWH
7DEOH±5($'&$3$&,7<SDUDPHWHUGDWDDVPRGLILHGIRU]RQHGEORFNGHYLFHV
7DEOH±5&%$6,6ILHOG
7DEOH±=%&FRPPDQGVWKDWDUHDOORZHGLQWKHSUHVHQFHRIYDULRXVUHVHUYDWLRQV
7DEOH±6XPPDU\RIFRPPDQGVWKDWDUHXQLTXHWR]RQHGEORFNGHYLFHV
7DEOH±7\SLFDOE\WH]RQHGEORFNGHYLFH&'%IRUPDWZLWKQRGDWDWUDQVIHU
7DEOH±&/26(=21(FRPPDQG
7DEOH±&/26(=21(FRPPDQGSURFHVVLQJ
7DEOH±),1,6+=21(FRPPDQG
7DEOH±),1,6+=21(FRPPDQGSURFHVVLQJ
7DEOH±23(1=21(FRPPDQG
7DEOH±23(1=21(FRPPDQGSURFHVVLQJ
7DEOH±5(029((/(0(17$1'02',)<=21(6FRPPDQG
7DEOH±5(32575($/06FRPPDQG
7DEOH±5(32575($/065(3257,1*237,216ILHOG
7DEOH±5(32575($/06SDUDPHWHUGDWD
7DEOH±5HDOPGHVFULSWRU
7DEOH±5($/05(675,&7,216ILHOG
7DEOH±5HDOP6WDUW(QGGHVFULSWRU
7DEOH±5(3257=21('20$,16FRPPDQG
7DEOH±5(3257=21('20$,165(3257,1*237,216ILHOG
7DEOH±5(3257=21('20$,16SDUDPHWHUGDWD
7DEOH±=RQHGRPDLQGHVFULSWRU
7DEOH±5(3257=21(6FRPPDQG
7DEOH±5(3257=21(65(3257,1*237,216ILHOG
7DEOH±5(3257=21(6SDUDPHWHUGDWD
7DEOH±6$0(ILHOGGHVFULSWLRQ
7DEOH±=RQHGHVFULSWRUIRUPDW
7DEOH±=RQHGHVFULSWRU=21(7<3(ILHOG
7DEOH±=RQHGHVFULSWRU=21(&21',7,21ILHOG
7DEOH±5(6(7:5,7(32,17(5FRPPDQG
7DEOH±5(6(7:5,7(32,17(5FRPPDQGSURFHVVLQJ
7DEOH±6(48(17,$/,=(=21(FRPPDQG
7DEOH±6(
...