ISO/IEC 23008-6:2018
(Main)Information technology — High efficiency coding and media delivery in heterogeneous environments — Part 6: 3D audio reference software
Information technology — High efficiency coding and media delivery in heterogeneous environments — Part 6: 3D audio reference software
This document contains simulation software for the MPEG-H 3D audio standard as defined in ISO/IEC 23008‑3.
Technologies de l'information — Codage à haut rendement et fourniture de supports dans les environnements hétérogènes — Partie 6: Logiciel de référence 3D Audio
General Information
Relations
Standards Content (Sample)
INTERNATIONAL ISO/IEC
STANDARD 23008-6
First edition
2018-08
Information technology — High
efficiency coding and media delivery
in heterogeneous environments —
Part 6:
3D audio reference software
Technologies de l'information — Codage à haut rendement et
fourniture de supports dans les environnements hétérogènes —
Partie 6: Logiciel de référence 3D Audio
Reference number
ISO/IEC 23008-6:2018(E)
©
ISO/IEC 2018
---------------------- Page: 1 ----------------------
ISO/IEC 23008-6:2018(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO/IEC 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO/IEC 2018 – All rights reserved
---------------------- Page: 2 ----------------------
ISO/IEC 23008-6:2018(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Reference software structure . 1
4.1 General . 1
4.2 Copyright disclaimer for software modules . 2
5 Bitstream decoding software . 2
5.1 General . 2
5.2 MPEG-H 3D audio decoding software . 3
Annex A (informative) Bitstream encoding software . 4
Annex B (informative) Additional utility software . 5
© ISO/IEC 2018 – All rights reserved iii
---------------------- Page: 3 ----------------------
ISO/IEC 23008-6:2018(E)
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are
members of ISO or IEC participate in the development of International Standards through technical
committees established by the respective organization to deal with particular fields of technical
activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international
organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the
work. In the field of information technology, ISO and IEC have established a joint technical committee,
ISO/IEC JTC 1.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for
the different types of document should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject
of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent
rights. Details of any patent rights identified during the development of the document will be in the
Introduction and/or on the ISO list of patent declarations received (see www .iso .org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following
URL: www .iso .org/iso/foreword .html.
This document was prepared by ISO/IEC JTC 1, Information technology, SC 29, Coding of audio, picture,
multimedia and hypermedia information.
A list of all parts in the ISO 23008 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www .iso .org/members .html.
iv © ISO/IEC 2018 – All rights reserved
---------------------- Page: 4 ----------------------
INTERNATIONAL STANDARD ISO/IEC 23008-6:2018(E)
Information technology — High efficiency coding and
media delivery in heterogeneous environments —
Part 6:
3D audio reference software
1 Scope
This document contains simulation software for the MPEG-H 3D audio standard as defined in ISO/
IEC 23008-3.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.