Graphic technology — Prints and printing inks — Assessment of resistance to various agents

Technologie graphique — Impressions et encres d'imprimerie — Évaluation de la résistance à divers agents

Grafična tehnologija - Odtisi in tiskarske barve - Ugotavljanje odpornosti proti različnim dejavnikom

General Information

Status
Withdrawn
Publication Date
06-Oct-1999
Withdrawal Date
06-Oct-1999
Current Stage
9599 - Withdrawal of International Standard
Completion Date
16-Mar-2004

Relations

Buy Standard

Standard
ISO 2836:1999 - Graphic technology -- Prints and printing inks -- Assessment of resistance to various agents
English language
4 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 2836:2002
English language
4 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 2836
Second edition
1999-10-01
Graphic technology — Prints and printing
inks — Assessment of resistance to various
agents
Technologie graphique — Impressions et encres d'imprimerie — Évaluation
de la résistance à divers agents
A
Reference number
ISO 2836:1999(E)

---------------------- Page: 1 ----------------------
ISO 2836:1999(E)
Contents
1 Scope .1
2 Normative reference .1
3 Test methods.1
3.1 Principle.1
3.2 Apparatus .1
3.3 Testing .2
3.3.1 Liquid agents.2
3.3.2 Solid agents.2
3.3.3 Meltable solid agents (Waxes).2
3.3.4 Solid spices.2
3.4 Test conditions .2
4 Evaluation.2
5 Test report .3
Bibliography.4
©  ISO 1999
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic
or mechanical, including photocopying and microfilm, without permission in writing from the publisher.
International Organization for Standardization
Case postale 56 • CH-1211 Genève 20 • Switzerland
Internet iso@iso.ch
Printed in Switzerland
ii

---------------------- Page: 2 ----------------------
© ISO
ISO 2836:1999(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO
member bodies). The work of preparing International Standards is normally carried out through ISO technical
committees. Each member body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, governmental and non-governmental, in
liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
International Standard ISO 2836 was prepared by Technical Committee ISO TC 130, Graphic technology.
This second edition cancels and replaces ISO 2836:1974, ISO 2838:1974, ISO 2839:1974, ISO 2840:1974, ISO
2841:1974, ISO 2842:1974, ISO 2843:1974 and ISO 2844:1974.
iii

---------------------- Page: 3 ----------------------
© ISO
ISO 2836:1999(E)
Introduction
Before the developement of this International Standard a series of International Standards existed each describing
the resistance of prints and/or printing inks to a single fluid or solid agent such as water (ISO 2836), alkalis (ISO
2838), soaps (ISO 2839) detergents (ISO 2840), cheese (ISO 2841), oils and fats (ISO 2842), paraffin wax (ISO
2843) and spices (ISO 2844). Since the main difference between those International Standards were the exposure
conditions it was decided in TC 130 to develop one single International Standard including all of the above-
mentioned agents and relevant exposure conditions appropriate for a number of resistance tests. For the
assessment of resistance of prints to solvents and acids see ISO 2837 [1] and ISO 11628 [2].
iv

---------------------- Page: 4 ----------------------
INTERNATIONAL STANDARD  © ISO ISO 2836:1999(E)
Graphic technology — Prints and printing inks — Assessment of
resistance to various agents
1 Scope
This International Standard specifies methods for assessing the resistance of prints and printing inks to water,
alkalis, oils and fats, cheese, detergents, soaps, wax and spices.
It applies to all printing substrates such as paper, board, metals (thin
...

SLOVENSKI STANDARD
SIST ISO 2836:2002
01-november-2002
*UDILþQDWHKQRORJLMD2GWLVLLQWLVNDUVNHEDUYH8JRWDYOMDQMHRGSRUQRVWLSURWL
UD]OLþQLPGHMDYQLNRP
Graphic technology -- Prints and printing inks -- Assessment of resistance to various
agents
Technologie graphique -- Impressions et encres d'imprimerie -- Évaluation de la
résistance à divers agents
Ta slovenski standard je istoveten z: ISO 2836:1999
ICS:
87.080 Barvila. Tiskarske barve Inks. Printing inks
SIST ISO 2836:2002 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ISO 2836:2002

---------------------- Page: 2 ----------------------

SIST ISO 2836:2002
INTERNATIONAL ISO
STANDARD 2836
Second edition
1999-10-01
Graphic technology — Prints and printing
inks — Assessment of resistance to various
agents
Technologie graphique — Impressions et encres d'imprimerie — Évaluation
de la résistance à divers agents
A
Reference number
ISO 2836:1999(E)

---------------------- Page: 3 ----------------------

SIST ISO 2836:2002
ISO 2836:1999(E)
Contents
1 Scope .1
2 Normative reference .1
3 Test methods.1
3.1 Principle.1
3.2 Apparatus .1
3.3 Testing .2
3.3.1 Liquid agents.2
3.3.2 Solid agents.2
3.3.3 Meltable solid agents (Waxes).2
3.3.4 Solid spices.2
3.4 Test conditions .2
4 Evaluation.2
5 Test report .3
Bibliography.4
©  ISO 1999
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic
or mechanical, including photocopying and microfilm, without permission in writing from the publisher.
International Organization for Standardization
Case postale 56 • CH-1211 Genève 20 • Switzerland
Internet iso@iso.ch
Printed in Switzerland
ii

---------------------- Page: 4 ----------------------

SIST ISO 2836:2002
© ISO
ISO 2836:1999(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO
member bodies). The work of preparing International Standards is normally carried out through ISO technical
committees. Each member body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, governmental and non-governmental, in
liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
International Standard ISO 2836 was prepared by Technical Committee ISO TC 130, Graphic technology.
This second edition cancels and replaces ISO 2836:1974, ISO 2838:1974, ISO 2839:1974, ISO 2840:1974, ISO
2841:1974, ISO 2842:1974, ISO 2843:1974 and ISO 2844:1974.
iii

---------------------- Page: 5 ----------------------

SIST ISO 2836:2002
© ISO
ISO 2836:1999(E)
Introduction
Before the developement of this International Standard a series of International Standards existed each describing
the resistance of prints and/or printing inks to a single fluid or solid agent such as water (ISO 2836), alkalis (ISO
2838), soaps (ISO 2839) detergents (ISO 2840), cheese (ISO 2841), oils and fats (ISO 2842), paraffin wax (ISO
2843) and spices (ISO 2844). Since the main difference between those International Standards were the exposure
conditions it was decided in TC 130 to develop one single International Standard including all of the above-
mentioned agents and relevant exposure conditions appropriate for a number of resistance tests. For the
assessment of resistance of prints to solvents and acids see ISO 2837 [1] and ISO 11628 [2].
iv

---------------------- Page: 6
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.