ISO 4320:1977
(Main)Non-ionic surface active agents — Determination of cloud point index — Volumetric method
Non-ionic surface active agents — Determination of cloud point index — Volumetric method
The determination is carried out by adding, at 30 degree Celsius, of distilled water to a propanol solution to the surface active agent until the appearance of cloudiness. The determination of the cloud point index provided a way of characterizing weakly alkoxylated derivates and their hydrocarbon hydrophobic groups. This simple and rapid measurement is a valuable means for checking the level of alkoxylation of non-ionic derivatives intended, for example, for sulphonation.
Agents de surface non ioniques — Détermination de l'indice de trouble — Méthode volumétrique
La présente Norme internationale spécifie une méthode volumétrique de détermination de l'indice de trouble des agents de surface non ioniques. Cette méthode est applicable aux agents de surface non ioniques faiblement oxyalkylés (1 à 5 groupes oxyéthylène) dont le groupe hydrophobe est apporté par un alcool, un alkylphénol ou un acide gras (à condition que ce dernier ait une température de fusion inférieure à 30 °C), pour autant que le produit soit soluble à 30 °C dans le propanol-1 à raison de 1 g dans 10 ml. Elle est également applicable aux bases lipophiles dérivées d'alcools, d'alkylphénols et d'acides gras.
General Information
Buy Standard
Standards Content (Sample)
INTERNATIONAL STANDARD
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION l MEXKAYHAPOJ.lHAJI OPTAHM3AUMR l-IO CTAHLIAPTM3AUWM.ORGANISATION INTERNATIONALE DE NORMALISATION
Non-ionic surface active agents - Determination of cloud
point index - Volumetric method
Determination de I’indice de trouble - Mbthode volum&rique
Agents de surface non ioniques -
First edition - 1977-02-01
UDC 661.185 : 543 Ref. No. ISO 4320-1977 (E)
Descriptors : surfactants,
non-ionic surfactants, tests, determination, cloud Point, volumetric analysis.
Price based on 3 pages
ISO (the International Organization for Standardization) is a worldwide federation
of national Standards institutes (ISO member bodies). The work of developing
International Standards is carried out through ISO technical committees. Every
member body interested in a subject for which a technical committee has been set
International organizations,
up has the right to be represented on that committee.
governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated
to the member bodies for approval before their acceptance as International
Standards by the ISO Council.
International Standard ISO 4320 was drawn up by Technical Committee
ISO/TC 91, Surface active agents, and was circulated to the member bedies in
October 1975.
lt has been approved by the member bodies of the following countries :
Austria Iran Portugal
Belgium I taly Romania
Brazil Japan South Africa, Rep. of
Canada Korea, Dem. P. Rep. of Spain
France Mexico Switzerland
Germany Netherlands Turkey
Hungary New Zealand United Kingdom
India Poland U.S.A.
No member body expressed disapproval of the document.
0 International Organkation for Standardization, 1977 l
Printed in Switzerland
INTERNATIONAL STANDARD ISO 43204977 (E)
Non-ionic surface active agents - Determination of cloud
Point index - Volumetric method
5 PRINCIPLE
C9 INTRODUCTION
Addition, at 30 ‘C, of distilled water to a propanol Solution
Determination of the cloud Point index provides a way of
sf the surface active agent until the appearance of
characterizing weakly alkoxylated derivatives and their
cloudiness.
hydrocarbon hydrophobic groups.
This simple and rapid measurement is a valuable means for
checking the level of alkoxylation of non-ionic derivatives
intended, for example, for sulphonation.
6 REAGENTS
1 SCOPE
6.1 Distilled water.
This International Standard specifies a volumetric method
for the determination of the cloud Point index of non-ionic
surface active agents.
6.2 Propan-Vol, complying with the following require-
ments :
2 FIELD OF APPLICATION
-
assay (by gas chromatography) 99 % (m/m);
The method is applicable to weakly alkoxylated non-ionic
-
surface active agents (1 to 5 oxyethylene groups) the
density p20 0,804 to 0,805 g/ml;
hydrophobic group of which is provided by an alcohol, an
-
refractive index nE” 1,384 to 1,385;
alkylphenol or a fatty acid (provided that the last has a
melting Point lower than 30 “C), subject to the product
-
non-volatile matter < 0,005 % (mlm);
being soluble in propan-1 -01 to the extent of 1 g in 10 ml
at 30 “C. free acidity (expressed as C2HsCOOH) < O,Ol%
mm;
I/ 1
lt is equally applicable to Iipophilic bases derived from
-
alcohols, alkylphenols and fatty acids. water (determined by the Karl Fischer method;
see ISO 760) < 0,2 % (mlm).
3 REFERENCE
ISO 607, Surface active agents - Detergents - Methods of
Sample division. 1)
7 APPARATUS
Ordinary laboratory apparatus, and in particular :
4 DEFINITION
For the purposes of this International Standard, the
7.1 Beaker (see the figure) of height 80 mm and diameter
following definition applies :
50 mm, with double Walls permitting temperature stability,
and having a mass less than 200 g, fitted with a poly-
cloud Point index : The number of millilitres of distilled
ethylene, polytetrafluoroethylene or an aluminium foil
water necessary to render cloudy, at a specified tem-
cover pierced with two holes allowing entry o
...
NORME INTERNATIONALE 60 4320-1977 (F)/ERRATUM
Publié 1980-06-01
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION .MEXJfYHAPOAHAJl OPI-AHM3ALWI l-I0 CTAHflAPTM3AUMH .ORGANISATION INTERNATIONALE DE NORMALISATION
Agents de surface non ioniques - Détermination de l’indice de trouble - Méthode volumétrique
ERRATUM
Page 2
Remplacer les textes des paragraphes 9.1 et 10.1 par les suivants :
9.1 Prise d’essai
Peser, dans le bécher (7.1) préalablement taré à 0,Ol g près, 1,0 f 0,l g de l’échantillon pour laboratoire.
10.1 Mode de calcul
L’indice de trouble du produit s’exprime par le volume, en millilitres, d’eau introduit pour rendre opaque la
solution d’agent de surface non ionique, en opérant selon le mode opératoire spécifié dans le chapitre 9.
Chaque résultat est la moyenne d’au moins trois déterminations effectuées à 0,05 ml près (1 goutte d’eau).
Page 3
Ajouter sous la rubrique d) (((les conditions de l’essai :D)
((- la masse de la prise d’essai,)).
Page blanche
NORME INTERNATIONALE
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION l MEX~YHAPOflHAR OPl-AHM3ALUM n0 CTAHAAPTM3ALWW .ORGANISATION INTERNATIONALE DE NORMALISATION
Agents de surface non ioniques - Détermination de l’indice
- Méth.ode volumétrique
de trouble
Determination of cloud point index - Volumetrie method
Non-ionic surface active agents -
Première édition - 1977-02-01
I%f. no : ISO 4320-1977 (F)
CDU 661.185 : 543
Descripteurs : agent de surface, agent de surface non ionique, essai, détermination, point de trouble, méthode volumétrique.
Prix basé sur 3 pages
AVANT-PROPOS
L’ISO (Organisation internationale de normalisation) est une fédération mondiale
d’organismes nationaux de normalisation (comités membres de I’ISO). L’élaboration
des Normes internationales est confiée aux comités techniques de I’ISO. Chaque
comité membre intéressé par une étude a le droit de faire partiedu comité technique
correspondant. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec I’ISO, participent également aux travaux.
Les projets de Normes internationales adoptés par les comités techniques sont
soumis aux comités membres pour approbation, avant leur acceptation comme
Normes internationales par le Conseil de I’ISO.
La Norme internationale ISO 4320 a été établie par le comité technique
ISO/TC 91, Agents de surface, et a été soumise aux comités membres en
octobre 1975.
Elle a été approuvée par les comités membres des pays suivants :
Afrique du Sud, Rép. d’ France
Pays-Bas
Allemagne Hongrie
Pologne
Au triche Inde
Portugal
Belgique Iran Roumanie
Brési I Italie Royaume-Uni
Canada Japon Suisse
Corée, Rép. dém. p. de Mexique Turquie
Espagne Nouvelle-Zélande U.S.A.
Aucun comité membre n’a désapprouvé le document.
0 Organisation internationale de normalisation, 1977 l
Imprimé en Suisse
ISO 43204977 (F)
NORME INTERNATIONALE
Agents de surface non ioniques - Détermination de l’indice
de trouble - Méth.ode volumétrique
0 INTRODUCTION 5 PRINCIPE
La détermination de l’indice de trouble permet la caractéri- Dans une solution propanolique d’agent de surface,
sation des dérivés faiblement oxyalkylés et de leur groupe
addition, à la température de 30 OC, d’eau distillée jusqu’à
hydrophobe hydrocarboné. l’apparition d’un milieu opaque.
Ce mesurage simple et rapide est un précieux moyen de
contrôle du taux d’oxyalkylation des dérivés non ioniques
destinés, par exemple, à la sulfonation.
6 RÉACTIFS
1 OBJET
6.1 Eau distillée.
La présente Norme internationale spécifie une méthode
volumétrique de détermination de l’indice de trouble des
agents de surface non ioniques.
6.2 Propanol-1, conforme aux spécifications suivantes :
titre (chromatographie en phase gazeuse) 99 %
2 DOMAINE D’APPLICATION mm;
r/ 1
Cette méthode est applicable aux agents de surface non - masse volumique p20 0,804 à 0,805 g/mI;
ioniques faiblement oxyalkylés (1 à 5 groupes oxyéthylène)
-
dont le groupe hydrophobe est apporté par un alcool, un indice de réfraction nDo 1,384 à 1,385;
alkylphénol ou un acide gras (à condition que ce dernier ait
une température de fusion inférieure à 30 “C), pour autant - matières non volatiles < 0,005 % (mlm);
que le produit soit soluble à 30 “C dans le propanol-1 à
- acidité libre (exprimée en C2H5COOH) < 0,Ol %
raison de 1 g dans 10 ml.
(mlm);
Elle est également applicable aux bases lipophiles dérivées
-
eau (déterminée selon la méthode de Karl Fischer;
d’alcools, d’alkylphénols et d’acides gras.
voir ISO 760) < 0,2 % (mlm).
3 RÉFÉRENCE
ISO 607, Agents de surface - Détergents - Méthodes de L
7 APPAREILLAGE
division d’un échantillon. 1)
Matériel courant de laboratoire, et notamment :
4 DÉFINI
...
NORME INTERNATIONALE 60 4320-1977 (F)/ERRATUM
Publié 1980-06-01
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION .MEXJfYHAPOAHAJl OPI-AHM3ALWI l-I0 CTAHflAPTM3AUMH .ORGANISATION INTERNATIONALE DE NORMALISATION
Agents de surface non ioniques - Détermination de l’indice de trouble - Méthode volumétrique
ERRATUM
Page 2
Remplacer les textes des paragraphes 9.1 et 10.1 par les suivants :
9.1 Prise d’essai
Peser, dans le bécher (7.1) préalablement taré à 0,Ol g près, 1,0 f 0,l g de l’échantillon pour laboratoire.
10.1 Mode de calcul
L’indice de trouble du produit s’exprime par le volume, en millilitres, d’eau introduit pour rendre opaque la
solution d’agent de surface non ionique, en opérant selon le mode opératoire spécifié dans le chapitre 9.
Chaque résultat est la moyenne d’au moins trois déterminations effectuées à 0,05 ml près (1 goutte d’eau).
Page 3
Ajouter sous la rubrique d) (((les conditions de l’essai :D)
((- la masse de la prise d’essai,)).
Page blanche
NORME INTERNATIONALE
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION l MEX~YHAPOflHAR OPl-AHM3ALUM n0 CTAHAAPTM3ALWW .ORGANISATION INTERNATIONALE DE NORMALISATION
Agents de surface non ioniques - Détermination de l’indice
- Méth.ode volumétrique
de trouble
Determination of cloud point index - Volumetrie method
Non-ionic surface active agents -
Première édition - 1977-02-01
I%f. no : ISO 4320-1977 (F)
CDU 661.185 : 543
Descripteurs : agent de surface, agent de surface non ionique, essai, détermination, point de trouble, méthode volumétrique.
Prix basé sur 3 pages
AVANT-PROPOS
L’ISO (Organisation internationale de normalisation) est une fédération mondiale
d’organismes nationaux de normalisation (comités membres de I’ISO). L’élaboration
des Normes internationales est confiée aux comités techniques de I’ISO. Chaque
comité membre intéressé par une étude a le droit de faire partiedu comité technique
correspondant. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec I’ISO, participent également aux travaux.
Les projets de Normes internationales adoptés par les comités techniques sont
soumis aux comités membres pour approbation, avant leur acceptation comme
Normes internationales par le Conseil de I’ISO.
La Norme internationale ISO 4320 a été établie par le comité technique
ISO/TC 91, Agents de surface, et a été soumise aux comités membres en
octobre 1975.
Elle a été approuvée par les comités membres des pays suivants :
Afrique du Sud, Rép. d’ France
Pays-Bas
Allemagne Hongrie
Pologne
Au triche Inde
Portugal
Belgique Iran Roumanie
Brési I Italie Royaume-Uni
Canada Japon Suisse
Corée, Rép. dém. p. de Mexique Turquie
Espagne Nouvelle-Zélande U.S.A.
Aucun comité membre n’a désapprouvé le document.
0 Organisation internationale de normalisation, 1977 l
Imprimé en Suisse
ISO 43204977 (F)
NORME INTERNATIONALE
Agents de surface non ioniques - Détermination de l’indice
de trouble - Méth.ode volumétrique
0 INTRODUCTION 5 PRINCIPE
La détermination de l’indice de trouble permet la caractéri- Dans une solution propanolique d’agent de surface,
sation des dérivés faiblement oxyalkylés et de leur groupe
addition, à la température de 30 OC, d’eau distillée jusqu’à
hydrophobe hydrocarboné. l’apparition d’un milieu opaque.
Ce mesurage simple et rapide est un précieux moyen de
contrôle du taux d’oxyalkylation des dérivés non ioniques
destinés, par exemple, à la sulfonation.
6 RÉACTIFS
1 OBJET
6.1 Eau distillée.
La présente Norme internationale spécifie une méthode
volumétrique de détermination de l’indice de trouble des
agents de surface non ioniques.
6.2 Propanol-1, conforme aux spécifications suivantes :
titre (chromatographie en phase gazeuse) 99 %
2 DOMAINE D’APPLICATION mm;
r/ 1
Cette méthode est applicable aux agents de surface non - masse volumique p20 0,804 à 0,805 g/mI;
ioniques faiblement oxyalkylés (1 à 5 groupes oxyéthylène)
-
dont le groupe hydrophobe est apporté par un alcool, un indice de réfraction nDo 1,384 à 1,385;
alkylphénol ou un acide gras (à condition que ce dernier ait
une température de fusion inférieure à 30 “C), pour autant - matières non volatiles < 0,005 % (mlm);
que le produit soit soluble à 30 “C dans le propanol-1 à
- acidité libre (exprimée en C2H5COOH) < 0,Ol %
raison de 1 g dans 10 ml.
(mlm);
Elle est également applicable aux bases lipophiles dérivées
-
eau (déterminée selon la méthode de Karl Fischer;
d’alcools, d’alkylphénols et d’acides gras.
voir ISO 760) < 0,2 % (mlm).
3 RÉFÉRENCE
ISO 607, Agents de surface - Détergents - Méthodes de L
7 APPAREILLAGE
division d’un échantillon. 1)
Matériel courant de laboratoire, et notamment :
4 DÉFINI
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.